Journal Articles

‒ Alavi, S., and Mostaghimi, J., 2019, "A Novel ICP Torch with Conical Geometry," Plasma Chemistry and Plasma Processing, pp. 1-18.

‒ Yi, P., Mostaghimi, J., Pershin, L., Xu, P., Zhan, X., Jia, D., Yi, H., and Liu, Y., 2018, "Effects of laser surface remelting on the molten salt corrosion resistance of yttria-stabilized zirconia coatings," Ceramics International, 44(18), pp. 22645-22655.

‒ Xu, P., Pershin, L., Mostaghimi, J., and Coyle, T. W., 2018, "Efficient one-step fabrication of ceramic superhydrophobic coatings by solution precursor plasma spray," Materials Letters, 211, pp. 24-27.

‒ Xu, P., Coyle, T. W., Pershin, L., and Mostaghimi, J., 2018, "Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process," Materials & Design, 160, pp. 974-984.

‒ Xu, P., Coyle, T. W., Pershin, L., and Mostaghimi, J., 2018, "Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior," Journal of colloid and interface science, 523, pp. 35-44.

‒ Xin, Q., Su, X., Alavi, S., Wang, B., and Mostaghimi, J., 2018, "Effects of conical nozzle and its geometry on properties of an inductively coupled plasma jet used for optical fabrication," Applied Thermal Engineering, 128, pp. 785-794.

‒ Sivakumar, S., Shanmugavelayutham, G., Yugeswaran, S., and Mostaghimi, J., 2018, "Influence of water vapour on structural and thermal conductivity of post-heat treated plasma sprayed LZ and YSZ coatings," Journal of Alloys and Compounds, 740, pp. 212-221.

‒ Mostaghimi, J., and Chandra, S., 2018, "Droplet Impact and Solidification in Plasma Spraying," Handbook of Thermal Science and Engineering, pp. 2967-3008.

‒ Jafari, M., Mostaghimi, J., Monajatizadeh, H., and Rafiei, M., 2018, "Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method," Surface Engineering, 34(3), pp. 220-225.

‒ Fu, Y., Rezaey, R., Chandra, S., Wen, J., and Zhang, C., 2018, "An experimental investigation on heat transfer enhancement of sprayed wire-mesh heat exchangers (vol 112, pg 699, 2017)," International Journal of Heat and Mass Transfer, 119, pp. 962-962.

‒ Feng, C., Yugeswaran, S., and Chandra, S., 2018, "Capillary rise of liquids in thermally sprayed porous copper wicks," Experimental Thermal and Fluid Science.

‒ Boscariol, C., Chandra, S., Sarker, D., Crua, C., and Marengo, M., 2018, "Drop impact onto attached metallic meshes: liquid penetration and spreading," Experiments in Fluids, 59(12), p. 189.

‒ Xu, P., Mostaghimi, J., Coyle, T., and Pershin, L., 2017, "Suspension Plasma Spray of Yttria Stabilized Zirconia Coatings," Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development, 263, p. 451.

‒ Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., and Dolatabadi, A., 2017, "The 2016 Thermal Spray Roadmap (vol 25, pg 1376, 2016)," JOURNAL OF THERMAL SPRAY TECHNOLOGY, 26(5), pp. 985-986.

‒ Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., and Dolatabadi, A., 2017, "Erratum to: The 2016 Thermal Spray Roadmap (Journal of Thermal Spray Technology,(2016), 25, 8,(1376-1440), 10.1007/s11666-016-0473-x)," Journal of Thermal Spray Technology, 26(5), pp. 985-986.

‒ Sivakumar, S., Praveen, K., Shanmugavelayutham, G., Yugeswaran, S., and Mostaghimi, J., 2017, "Thermo-physical behavior of atmospheric plasma sprayed high porosity lanthanum zirconate coatings," Surface and Coatings Technology, 326, pp. 173-182.

‒ Shafaghi, R., Mostaghimi, J., Pershin, V., and Ringuette, M., 2017, "Sporicidal efficacy of thermal-sprayed copper alloy coating," Canadian journal of microbiology, 63(5), pp. 384-391.

‒ Safaei, H., Emami, M. D., Jazi, H. S., and Mostaghimi, J., 2017, "Application of Compressible Volume of Fluid Model in Simulating the Impact and Solidification of Hollow Spherical ZrO2 Droplet on a Surface," Journal of Thermal Spray Technology, 26(8), pp. 1959-1981.

‒ Naterer, G., Suppiah, S., Rosen, M., Gabriel, K., Dincer, I., Jianu, O., Wang, Z., Easton, E., Ikeda, B., and Rizvi, G., 2017, "Advances in unit operations and materials for the CuCl cycle of hydrogen production," International Journal of Hydrogen Energy, 42(24), pp. 15708-15723.

‒ Mostaghimi, J., Pershin, L., and Yugeswaran, S., 2017, "Heat Transfer in DC AND RF Plasma Torches," Handbook of Thermal Science and Engineering, pp. 1-76.

‒ Jamaloei, A. D., Salimijazi, H. R., Edris, H., and Mostaghimi, J., 2017, "Study of TLP bonding of Ti-6Al-4V alloy produced by vacuum plasma spray forming and forging," Materials & Design, 121, pp. 355-366.

‒ Hafeez, P., Chandra, S., and Mostaghimi, J., 2017, "Heat Transfer During High Temperature Gas Flow Through Metal Foam Heat Exchangers," Journal of Heat Transfer, 139(12), p. 121801.

‒ Farrokhpanah, A., Mostaghimi, J., and Bussmann, M., 2017, "Free-Surface Enthalpy Method for Transient Convection/Diffusion Phase Change," arXiv preprint arXiv:1701.00463.

‒ Farrokhpanah, A., Coyle, T. W., and Mostaghimi, J., 2017, "Numerical study of suspension plasma spraying," Journal of Thermal Spray Technology, 26(1-2), pp. 12-36.

‒ Farrokhpanah, A., Bussmann, M., and Mostaghimi, J., 2017, "New smoothed particle hydrodynamics (SPH) formulation for modeling heat conduction with solidification and melting," Numerical Heat Transfer, Part B: Fundamentals, 71(4), pp. 299-312.

‒ Dalili, A., Esmaeelpanah, J., Chandra, S., and Mostaghimi, J., 2017, "Coalescence and agglomeration of droplets sprayed on a substrate," Atomization and Sprays, 27(1).

‒ Chandra, S., 2017, "COATING DEPOSITION BY THERMAL SPRAY PROCESSES," Annual Review of Heat Transfer, 20.

‒ Ataie, A., Mostaghimi, J., Pershin, L., and Xu, P., 2017, "Fabrication of nanostructured cobalt ferrite coatings using suspension plasma spraying (SPS) technique," Surface and Coatings Technology, 328, pp. 451-461.

‒ Arif, A., Al-Athel, K., and Mostaghimi, J., 2017, "3.4 Residual Stresses in Thermal Spray Coating."

‒ Alavi, S., Khayamian, T., and Mostaghimi, J., 2017, "Conical Torch: The Next-Generation Inductively Coupled Plasma Source for Spectrochemical Analysis," Analytical chemistry, 90(5), pp. 3036-3044.

‒ Al-Athel, K. S., Aly, S. P., Arif, A. F. M., and Mostaghimi, J., 2017, "3D modeling and analysis of the thermo-mechanical behavior of metal foam heat sinks," International Journal of Thermal Sciences, 116, pp. 199-213.

‒ Abubakar, A. A., Arif, A. F. M., Al-Athel, K. S., Akhtar, S. S., and Mostaghimi, J., 2017, "Modeling residual stress development in thermal spray coatings: current status and way forward," Journal of Thermal Spray Technology, 26(6), pp. 1115-1145.

‒ Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., and Dolatabadi, A., 2016, "The 2016 thermal spray roadmap," Journal of Thermal Spray Technology, 25(8), pp. 1376-1440.

‒ Saranjam, N., Chandra, S., Mostaghimi, J., Fan, H., and Simmer, J., 2016, "Orange peel formation due to surface tension-driven flows within drying paint films," Journal of Coatings Technology and Research, 13(3), pp. 413-426.

‒ Saranjam, N., and Chandra, S., 2016, "Bubble Clustering in Drying Paint Films," Industrial & Engineering Chemistry Research, 55(50), pp. 12825-12835.

‒ Saranjam, N., and Chandra, S., 2016, "Bubble growth and movement in drying paint films," Chemical Engineering Science, 145, pp. 149-161.

‒ Salavati, S., Coyle, T. W., and Mostaghimi, J., 2016, "The effect of heat treatment on mechanical properties of thermally sprayed sandwich structure beams," Journal of Thermal Spray Technology, 25(1-2), pp. 105-112.

‒ Salavati, S., Coyle, T., and Mostaghimi, J., 2016, "Twin wire arc spray process modification for production of porous metallic coatings," Surface and Coatings Technology, 286, pp. 16-24.

‒ Nejad, M., Shafaghi, R., Pershin, L., Mostaghimi, J., and Cooper, P., 2016, "Thermal spray coating: A new way of protecting wood," BioResources, 12(1), pp. 143-156.

‒ Kihm, K. D., Choi, C. K., and Pratt, D. M., 2016, "Heat Transfer Gallery," Journal of Heat Transfer, 138(008), p. 80301.

‒ Kadoura, M., Saranjam, N., Chandra, S., and Fan, H., 2016, "Nucleation of bubbles during drying of sprayed paint films," Progress in Organic Coatings, 99, pp. 452-462.

‒ Hafeez, P., Yugeswaran, S., Chandra, S., Mostaghimi, J., and Coyle, T., 2016, "Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams," Journal of Thermal Spray Technology, 25(5), pp. 1056-1067.

‒ Dalili, A., Chandra, S., Mostaghimi, J., Fan, H. C., and Simmer, J. C., 2016, "Bubble entrapment and escape from sprayed paint films," Progress in Organic Coatings, 97, pp. 153-165.

‒ Cai, Y., Coyle, T. W., Azimi, G., and Mostaghimi, J., 2016, "Superhydrophobic ceramic coatings by solution precursor plasma spray," Scientific reports, 6, p. 24670.

‒ Cai, Y., Azimi, G., Coyle, T. W., and Mostaghimi, J., 2016, "Solution Precursor Plasma Sprayed Superhydrophobic Surface," Additive Manufacturing and Strategic Technologies in Advanced Ceramics, 258, p. 141.

‒ Aly, S., Arif, A., Al-Athel, K., Mostaghimi, J., and Zubair, S., 2016, "Performance of open pore metal foam heat sinks fabricated with thermally sprayed interface," Applied Thermal Engineering, 105, pp. 411-424.

‒ Xu, G., Zhou, J., Geng, H., Lu, M., Yang, L., and Yu, L., 2015, "Research on the static and dynamic characteristics of misaligned journal bearing considering the turbulent and thermohydrodynamic effects," Journal of Tribology, 137(2), p. 024504.

‒ Salavati, S., Pershin, L., Coyle, T., and Mostaghimi, J., 2015, "Effect of Porosity Content of Arc-Sprayed Alloy 625 Skins on the Flexural Behavior of Nickel Foam Core Sandwich Structures," Journal of Thermal Spray Technology, 24(1-2), pp. 215-221.

‒ Salavati, S., Coyle, T., and Mostaghimi, J., 2015, "Optimization of grit-blasting process parameters for production of dense coatings on open pores metallic foam substrates using statistical methods," Journal of Thermal Spray Technology, 24(7), pp. 1246-1255.

‒ Mostaghimi, J., and Boulos, M. I., 2015, "Thermal plasma sources: how well are they adopted to process needs?," Plasma Chemistry and Plasma Processing, 35(3), pp. 421-436.

‒ Kazemipour, M., Salimijazi, H., Saidi, A., Saatchi, A., Mostaghimi, J., and Pershin, L., 2015, "The electrochemical hydrogen storage properties of Ti0. 72Zr0. 28Mn1. 6V0. 4 alloy synthesized by vacuum plasma spraying and vacuum copper boat induction melting: A comparative study," International Journal of Hydrogen Energy, 40(45), pp. 15569-15577.

‒ Farrokhpanah, A., Samareh, B., and Mostaghimi, J., 2015, "Applying contact angle to a two-dimensional multiphase smoothed particle hydrodynamics model," Journal of Fluids Engineering, 137(4), p. 041303.

‒ Adán, C., Marugán, J., Van Grieken, R., Chien, K., Pershin, L., Coyle, T., and Mostaghimi, J., 2015, "Effect of Liquid Feed-Stock Composition on the Morphology of Titanium Dioxide Films Deposited by Thermal Plasma Spray," Journal of nanoscience and nanotechnology, 15(9), pp. 6651-6662.

‒ Abubakar, A. A., Akhtar, S. S., Arif, A. F. M., and Mostaghimi, J., 2015, "The effect of porosity on the hot corrosion failure of thermal barrier coatings," Modelling and Simulation in Materials Science and Engineering, 23(7), p. 075001.

‒ Shan, Y., Shen, C., Jia, L., and Mostaghimi, J., 2014, "Modeling of Two-Phase Flow and Heat Transfer in Low-Temperature Oxygen-Fuel Spray Process," Journal of Thermal Spray Technology, 23(1-2), pp. 14-20.

‒ Samareh, B., Mostaghimi, J., and Moreau, C., 2014, "Thermocapillary migration of a deformable droplet," International Journal of Heat and Mass Transfer, 73, pp. 616-626.

‒ Salimijazi, H., Mousavi, Z., Golozar, M., Mostaghimi, J., and Coyle, T., 2014, "Kinetic Study of the Solid-State Transformation of Vacuum-Plasma-Sprayed Ti-6Al-4V Alloy," Journal of Thermal Spray Technology, 23(1-2), pp. 31-39.

‒ Rezaey, R., Salavati, S., Pershin, L., Coyle, T., Chandra, S., and Mostaghimi, J., 2014, "Erratum to: Fabrication of Wire Mesh Heat Exchangers for Waste Heat Recovery Using Wire-Arc Spraying," Journal of Thermal Spray Technology, 23(4), p. 755.

‒ Rezaey, R., Salavati, S., Pershin, L., Coyle, T., Chandra, S., and Mostaghimi, J., 2014, "Fabrication of wire mesh heat exchangers for waste heat recovery using wire-arc spraying," Journal of thermal spray technology, 23(4), pp. 609-615.

‒ Farrokhpanah, A., Montazeri, H., and Mostaghimi, J., 2014, "Parallel Finite Volume Algorithm on Graphic Processing Units (GPU)."

‒ Dalili, A., Chandra, S., Mostaghimi, J., Fan, H. C., and Simmer, J. C., 2014, "Formation of liquid sheets by deposition of droplets on a surface," Journal of colloid and interface science, 418, pp. 292-299.

‒ Sharifahmadian, O., Salimijazi, H., Fathi, M., Mostaghimi, J., and Pershin, L., 2013, "Study of the antibacterial behavior of wire arc sprayed copper coatings," Journal of thermal spray technology, 22(2-3), pp. 371-379.

‒ Sharifahmadian, O., Salimijazi, H., Fathi, M., Mostaghimi, J., and Pershin, L., 2013, "Relationship between surface properties and antibacterial behavior of wire arc spray copper coatings," Surface and Coatings Technology, 233, pp. 74-79.

‒ Shahverdi, A., Soucy, G., Simard, B., and Mostaghimi, J., 2013, "Effect of ammonia gas addition to the synthesis environment of single-walled carbon nanotubes on their surface chemistry," Chemical engineering journal, 230, pp. 80-92.

‒ Pershin, L., Mitrasinovic, A., and Mostaghimi, J., 2013, "Treatment of refractory powders by a novel, high enthalpy dc plasma," Journal of Physics D: Applied Physics, 46(22), p. 224019.

‒ Naterer, G. F., Suppiah, S., Stolberg, L., Lewis, M., Wang, Z., Dincer, I., Rosen, M., Gabriel, K., Secnik, E., and Easton, E., 2013, "Progress of international hydrogen production network for the thermochemical Cu–Cl cycle," International journal of hydrogen energy, 38(2), pp. 740-759.

‒ Murphy, A. B., Colombo, V., and Mostaghimi, J., 2013, "Arc welding, plasma cutting and plasma spraying," J. Phys. D: Appl. Phys, 46(220301), p. 220301.

‒ Lee, M. W., Kim, N. Y., Chandra, S., and Yoon, S. S., 2013, "Coalescence of sessile droplets of varying viscosities for line printing," International Journal of Multiphase Flow, 56, pp. 138-148.

‒ Kim, D.-Y., Park, J.-J., Lee, J.-G., Kim, D., Tark, S. J., Ahn, S., Yun, J. H., Gwak, J., Yoon, K. H., and Chandra, S., 2013, "Cold spray deposition of copper electrodes on silicon and glass substrates," Journal of thermal spray technology, 22(7), pp. 1092-1102.

‒ Kadoura, M., and Chandra, S., 2013, "Rupture of thin liquid films sprayed on solid surfaces," Experiments in fluids, 54(2), p. 1465.

‒ Amirzadeh, A., Raessi, M., and Chandra, S., 2013, "Producing molten metal droplets smaller than the nozzle diameter using a pneumatic drop-on-demand generator," Experimental Thermal and Fluid Science, 47, pp. 26-33.

‒ Tsolas, N., and Chandra, S., 2012, "Forced convection heat transfer in spray formed copper and nickel foam heat exchanger tubes," Journal of heat transfer, 134(6), p. 062602.

‒ Salimijazi, H., Hosseini, M., Mostaghimi, J., Pershin, L., Coyle, T. W., Samadi, H., and Shafyei, A., 2012, "Plasma sprayed coating using mullite and mixed alumina/silica powders," Journal of thermal spray technology, 21(5), pp. 825-830.

‒ Salimijazi, H., Behzad, T., and Mostaghimi, J., 2012, "SUPERALLOY SKIN ON NICKEL OPEN-PORE FOAM DEPOSITED BY THERMAL SPRAY PROCESSES."

‒ Montazeri, H., Bussmann, M., and Mostaghimi, J., 2012, "Accurate implementation of forcing terms for two-phase flows into SIMPLE algorithm," International Journal of Multiphase Flow, 45, pp. 40-52.

‒ Kim, D. Y., Park, J. J., Lee, J. G., Lee, M. W., Kim, H. Y., Oh, J. H., Seong, T. Y., Kim, D., James, S. C., and Van Hest, M. F., 2012, "Tuning Hydrophobicity with Honeycomb Surface Structure and Hydrophilicity with CF 4 Plasma Etching for Aerosol‐Deposited Titania Films," Journal of the American Ceramic Society, 95(12), pp. 3955-3961.

‒ Esfahani, E. A., Salimijazi, H., Golozar, M. A., Mostaghimi, J., and Pershin, L., 2012, "Study of corrosion behavior of arc sprayed aluminum coating on mild steel," Journal of thermal spray technology, 21(6), pp. 1195-1202.

‒ Alavi, S., Passandideh-Fard, M., and Mostaghimi, J., 2012, "Simulation of semi-molten particle impacts including heat transfer and phase change," Journal of Thermal Spray Technology, 21(6), pp. 1278-1293.

‒ Park, J.-J., Lee, M.-W., Yoon, S. S., Kim, H.-Y., James, S. C., Heister, S. D., Chandra, S., Yoon, W.-H., Park, D.-S., and Ryu, J., 2011, "Supersonic nozzle flow simulations for particle coating applications: effects of shockwaves, nozzle geometry, ambient pressure, and substrate location upon flow characteristics," Journal of thermal spray technology, 20(3), pp. 514-522.

‒ Naterer, G., Suppiah, S., Stolberg, L., Lewis, M., Ferrandon, M., Wang, Z., Dincer, I., Gabriel, K., Rosen, M., and Secnik, E., 2011, "Clean hydrogen production with the Cu–Cl cycle–progress of international consortium, II: simulations, thermochemical data and materials," International Journal of Hydrogen Energy, 36(24), pp. 15486-15501.

‒ Naterer, G., Suppiah, S., Stolberg, L., Lewis, M., Ferrandon, M., Wang, Z., Dincer, I., Gabriel, K., Rosen, M., and Secnik, E., 2011, "Clean hydrogen production with the Cu–Cl cycle–progress of international consortium, I: experimental unit operations," International Journal of Hydrogen Energy, 36(24), pp. 15472-15485.

‒ Moradian, A., and Mostaghimi, J., 2011, "Effects of injection angle on the measurement of surface tension coefficient by drop weight method," Physics and Chemistry of Liquids, 49(1), pp. 32-51.

‒ Mitrasinovic, A., Pershin, L., Wen, J. Z., and Mostaghimi, J., 2011, "Recovery of Cu and valuable metals from E-waste using thermal plasma treatment," JOM, 63(8), p. 24.

‒ Mcdonald, A., and Chandra, S., 2011, "Kinematic Viscosities of High‐Temperature Materials Used in Plasma Spraying," Journal of the American Ceramic Society, 94(6), pp. 1865-1871.

‒ Lin, E., Parizi, H., Pourmousa, A., Chandra, S., and Mostaghimi, J., 2011, "Coating the inner surfaces of pipes with high-viscosity epoxy in annular flow," Journal of coatings technology and research, 8(6), p. 697.

‒ Lee, M.-W., Park, J.-J., Kim, D.-Y., Yoon, S. S., Kim, H.-Y., James, S. C., Chandra, S., and Coyle, T., 2011, "Numerical studies on the effects of stagnation pressure and temperature on supersonic flow characteristics in cold spray applications," Journal of thermal spray technology, 20(5), pp. 1085-1097.

‒ Lee, M., Park, J., Kim, D., Yoon, S., Kim, H., Kim, D., James, S., Chandra, S., Coyle, T., and Ryu, J., 2011, "Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition," Journal of Aerosol Science, 42(11), pp. 771-780.

‒ Jazi, H. R. S., Mostaghimi, J., Pershin, L., Chandra, S., and Coyle, T. W., 2011, "Spray Forming of Metal Foam Heat Exchangers," International Journal of Transport Phenomena, 12.

‒ Esfarjani, S. A., Mostaghimi, J., Kim, K. S., Shahverdi, A., and Soucy, G., 2011, "Radio frequency thermal plasma: the cutting edge technology in production of single-walled carbon nanotubes," Journal of Thermal Science and Technology, 6(2), pp. 307-322.

‒ Behrooz, N., Hulse‐Smith, L., and Chandra, S., 2011, "An evaluation of the underlying mechanisms of bloodstain pattern analysis error," Journal of forensic sciences, 56(5), pp. 1136-1142.

‒ Shan, Y., Coyle, T., and Mostaghimi, J., 2010, "Modeling the influence of injection modes on the evolution of solution sprays in a plasma jet," Journal of thermal spray technology, 19(1-2), pp. 248-254.

‒ Saaedi, J., Coyle, T., Arabi, H., Mirdamadi, S., and Mostaghimi, J., 2010, "Effects of HVOF process parameters on the properties of Ni-Cr coatings," Journal of thermal spray technology, 19(3), pp. 521-530.

‒ Raessi, M., Mostaghimi, J., and Bussmann, M., 2010, "A volume-of-fluid interfacial flow solver with advected normals," Computers & Fluids, 39(8), pp. 1401-1410.

‒ Parizi, H. B., Mostaghimi, J., Pershin, L., and Jazi, H. S., 2010, "Analysis of the microstructure of thermal spray coatings: A modeling approach," Journal of thermal spray technology, 19(4), pp. 736-744.

‒ Naterer, G. F., Suppiah, S., Stolberg, L., Lewis, M., Wang, Z., Daggupati, V., Gabriel, K., Dincer, I., Rosen, M., and Spekkens, P., 2010, "Canada’s program on nuclear hydrogen production and the thermochemical Cu–Cl cycle," international journal of hydrogen energy, 35(20), pp. 10905-10926.

‒ Mulji, N., and Chandra, S., 2010, "Rupture and dewetting of water films on solid surfaces," Journal of colloid and interface science, 352(1), pp. 194-201.

‒ Mcdonald, A., Moreau, C., and Chandra, S., 2010, "Use of thermal emission signals to characterize the impact of fully and partially molten plasma-sprayed zirconia particles on glass surfaces," Surface and Coatings Technology, 204(15), pp. 2323-2330.

‒ Marr, M. A., Wallace, J. S., Pershin, L., Chandra, S., and Mostaghimi, J., 2010, "Preliminary testing of metal-based thermal barrier coating in a spark-ignition engine," Journal of Engineering for Gas Turbines and Power, 132(7), p. 072806.

‒ Marr, M. A., Wallace, J. S., Chandra, S., Pershin, L., and Mostaghimi, J., 2010, "A fast response thermocouple for internal combustion engine surface temperature measurements," Experimental thermal and fluid science, 34(2), pp. 183-189.

‒ Marr, M., Wallace, J. S., Memme, S., Chandra, S., Pershin, L., and Mostaghimi, J., 2010, "An investigation of metal and ceramic thermal barrier coatings in a spark-ignition engine," SAE International Journal of Engines, 3(2), pp. 115-125.

‒ Liu, H., Azarmi, F., Bussmann, M., Mostaghimi, J., and Coyle, T., 2010, "Experiments and simulation of rapid solidification of air plasma sprayed alloy 625 on stainless steel," Surface and Coatings Technology, 204(9-10), pp. 1521-1527.

‒ Lin, E., Parizi, H., Pourmousa, A., Chandra, S., and Mostaghimi, J., 2010, "Annular flow of high-viscosity epoxy in circular pipes," HEFAT 2010.

‒ Li, R., Ashgriz, N., Chandra, S., Andrews, J. R., and Drappel, S., 2010, "Coalescence of two droplets impacting a solid surface," Experiments in Fluids, 48(6), pp. 1025-1035.

‒ Li, R., Ashgriz, N., and Chandra, S., 2010, "Maximum spread of droplet on solid surface: Low reynolds and weber numbers," Journal of Fluids Engineering, 132(6), p. 061302.

‒ Kim, K., Moradian, A., Mostaghimi, J., and Soucy, G., 2010, "Modeling of induction plasma process for fullerene synthesis: Effect of plasma gas composition and operating pressure," Plasma Chemistry and Plasma Processing, 30(1), pp. 91-110.

‒ Kashani, A., and Mostaghimi, J., 2010, "Aerosol Characterization of Concentric Pneumatic Nebulizer Used in Inductively Coupled Plasma—Mass Spectrometry (ICP-MS)," Atomization and Sprays, 20(5).

‒ Barajas-Ledesma, E., García-Benjume, M., Espitia-Cabrera, I., Ortiz-Gutiérrez, M., Espinoza-Beltrán, F., Mostaghimi, J., and Contreras-García, M., 2010, "Determination of the band gap of TiO2–Al2O3 films as a function of processing parameters," Materials Science and Engineering: B, 174(1-3), pp. 71-73.

‒ Barajas-Ledesma, E., García-Benjume, M., Espitia-Cabrera, I., Bravo-Patino, A., Espinoza-Beltrán, F., Mostaghimi, J., and Contreras-García, M., 2010, "Photocatalytic activity of Al2O3-doped TiO2 thin films activated with visible light on the bacteria Escherichia coli," Materials Science and Engineering: B, 174(1-3), pp. 74-79.

‒ Azarmi, F., Coyle, T., and Mostaghimi, J., 2010, "Evaluation of the flexural rigidity of sandwich structures using experimentally obtained mechanical properties of the constituents," Journal of thermal spray technology, 19(1-2), pp. 429-438.

‒ Amirzadeh, A., and Chandra, S., 2010, "Small droplet formation in a pneumatic drop-on-demand generator: Experiments and analysis," Experimental Thermal and Fluid Science, 34(8), pp. 1488-1497.

‒ Wu, T. C.-M., Bussmann, M., and Mostaghimi, J., 2009, "The impact of a partially molten YSZ particle," Journal of thermal spray technology, 18(5-6), p. 957.

‒ Tanaka, Y., and Mostaghimi, J., 2009, "Numerical Simulation of Solid Particle Ablation in Thermal Plasmas using CIP‐VOF Method," IEEJ Transactions on Electrical and Electronic Engineering, 4(4), pp. 488-496.

‒ Soltani, R., Coyle, T. W., and Mostaghimi, J., 2009, "Creep behaviour of plasma sprayed thermal barrier coatings," Advanced Ceramic Coatings and Interfaces, 306, p. 37.

‒ Shinoda, K., Raessi, M., Mostaghimi, J., Yoshida, T., and Murakami, H., 2009, "Effect of substrate concave pattern on splat formation of yttria-stabilized zirconia in atmospheric plasma spraying," Journal of thermal spray technology, 18(4), pp. 609-618.

‒ Shahverdi, A., Kim, K., Alinejad, Y., Soucy, G., and Mostaghimi, J., 2009, "Selective oxidation of excess amorphous carbon during single-walled carbon nanotubes synthesis by induction thermal plasma process," J. Nano Res, 2, pp. 800-812.

‒ Salimijazi, H., Mostaghimi, J., Chandra, S., Pershin, L., and Coyle, T., 2009, "Spray Forming of Metal Foam Heat Exchangers," Proceedings of ITP.

‒ Raessi, M., Bussmann, M., and Mostaghimi, J., 2009, "A semi‐implicit finite volume implementation of the CSF method for treating surface tension in interfacial flows," International journal for numerical methods in fluids, 59(10), pp. 1093-1110.

‒ Pershin, L., Mostaghimi, J., and Grisha, N., 2009, "Carbonaceous gases for DC plasma generation," ISPC19—2009, Bochum, Germany.

‒ Naterer, G., Suppiah, S., Lewis, M., Gabriel, K., Dincer, I., Rosen, M. A., Fowler, M., Rizvi, G., Easton, E., and Ikeda, B., 2009, "Recent Canadian advances in nuclear-based hydrogen production and the thermochemical Cu–Cl cycle," International Journal of Hydrogen Energy, 34(7), pp. 2901-2917.

‒ Muratore, C., Hu, J., Voevodin, A., Liang, C., Yang, C., and Huang, N., 2009, "Diamond like carbon (DLC) films were deposited at room temperature on Si (111) substrates by microwave electron cyclotron resonance (ECR) plasma chemical vapor deposition (CVD) process using plasma of methane diluted with argon gas. During deposition, dc self bias (− 25 V to− 200 V) on substrate was varied by application of RF power to the substrate. The influence of substrate bias on density of the," Surface & Coatings Technology, 203(8), pp. 1034-1044.

‒ Liu, H., Jazi, H. S., Bussmann, M., and Mostaghimi, J., 2009, "Experiments and modeling of rapid solidification of plasma-sprayed yttria-stabilized zirconia," Acta Materialia, 57(20), pp. 6013-6021.

‒ Liu, H., Bussmann, M., and Mostaghimi, J., 2009, "A comparison of hyperbolic and parabolic models of phase change of a pure metal," International Journal of Heat and Mass Transfer, 52(5-6), pp. 1177-1184.

‒ Kim, K. S., Moradian, A., Mostaghimi, J., Alinejad, Y., Shahverdi, A., Simard, B., and Soucy, G., 2009, "Synthesis of single-walled carbon nanotubes by induction thermal plasma," Nano Research, 2(10), p. 800.

‒ Jazi, H. S., Mostaghimi, J., Chandra, S., Pershin, L., and Coyle, T., 2009, "Spray-Formed, Metal-Foam Heat Exchangers for High Temperature Applications," Journal of Thermal Science and Engineering Applications, 1(3), p. 031008.

‒ Fang, M., Chandra, S., and Park, C., 2009, "Heat transfer during deposition of molten aluminum alloy droplets to build vertical columns," Journal of Heat Transfer, 131(11), p. 112101.

‒ Dhiman, R., and Chandra, S., 2009, "Rupture of thin films formed during droplet impact," Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 466(2116), pp. 1229-1245.

‒ Chandra, S., and Fauchais, P., 2009, "Formation of solid splats during thermal spray deposition," Journal of Thermal Spray Technology, 18(2), pp. 148-180.

‒ Chandra, S., and Dhiman, R., 2009, "Dynamics of particle deformation during plasma spray coating," High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 13(3-4).

‒ Azarmi, F., Coyle, T., Mostaghimi, J., and Pershin, L., 2009, "A new approach to develop high temperature foam core sandwich structures using air plasma spraying," The International Journal of Advanced Manufacturing Technology, 44(9-10), pp. 900-905.

‒ Azarmi, F., Coyle, T., and Mostaghimi, J., 2009, "Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam," Journal of materials science, 44(11), pp. 2836-2843.

‒ Azarmi, F., Coyle, T., and Mostaghimi, J., 2009, "Young's modulus measurement and study of the relationship between mechanical properties and microstructure of air plasma sprayed alloy 625," Surface and Coatings Technology, 203(8), pp. 1045-1054.

‒ Xue, M., Chandra, S., Mostaghimi, J., and Moreau, C., 2008, "A stochastic coating model to predict the microstructure of plasma sprayed zirconia coatings," Modelling and Simulation in Materials Science and Engineering, 16(6), p. 065006.

‒ Soltani, R., Coyle, T. W., and Mostaghimi, J., 2008, "Microstructure and creep behavior of plasma-sprayed yttria stabilized zirconia thermal barrier coatings," Journal of Thermal Spray Technology, 17(2), pp. 244-253.

‒ Soltani, R., Coyle, T., Mostaghimi, J., Lima, R., and Moreau, C., 2008, "Thermo-physical properties of plasma sprayed Yttria Stabilized Zirconia Coatings," Surface and Coatings Technology, 202(16), pp. 3954-3959.

‒ Saaedi, J., Coyle, T., Mirdamadi, S., Arabi, H., and Mostaghimi, J., 2008, "Phase formation in a Ni–50Cr HVOF coating," Surface and Coatings Technology, 202(24), pp. 5804-5811.

‒ Roisman, I., Opfer, L., Tropea, C., Raessi, M., Mostaghimi, J., and Chandra, S., 2008, "Drop impact onto a dry surface: Role of the dynamic contact angle," Colloids and Surfaces A: Physicochemical and Engineering Aspects, 322(1-3), pp. 183-191.

‒ Pershin, L., Chen, L., and Mostaghimi, J., 2008, "Plasma spraying of metal coatings using CO 2-based gas mixtures," Journal of Thermal Spray Technology, 17(5-6), pp. 608-611.

‒ Murphy, A. B., Boulos, M. I., Colombo, V., Fauchais, P., Ghedini, E., Gleizes, A., Schram, D., and Proulx, P., 2008, "Advanced thermal plasma modelling," High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 12(3-4).

‒ Mostaghimi, J., 2008, "Numerical Simulation on Ablation Process of a Solid Particle in Thermal Plasmas using CIP-VOF Method," 電気学会研究会資料. ED, 放電研究会, 2008(62), pp. 23-28.

‒ Moradian, A., and Mostaghimi, J., 2008, "Measurement of surface tension, viscosity, and density at high temperatures by free-fall drop oscillation," Metallurgical and Materials Transactions B, 39(2), pp. 280-290.

‒ Mcdonald, A., Chandra, S., and Moreau, C., 2008, "Photographing impact of plasma-sprayed particles on rough substrates," Journal of Materials Science, 43(13), pp. 4631-4643.

‒ Liu, H., Bussmann, M., and Mostaghimi, J., 2008, "The Effect of Undercooling on Solidification of YSZ Splats," Journal of Thermal Spray Technology, 17(5-6), pp. 646-654.

‒ Li, R., Ashgriz, N., Chandra, S., Andrews, J. R., and Williams, J., 2008, "Drawback during deposition of overlapping molten wax droplets," Journal of Manufacturing Science and Engineering, 130(4), p. 041011.

‒ Li, R., Ashgriz, N., Chandra, S., and Andrews, J. R., 2008, "Shape and surface texture of molten droplets deposited on cold surfaces," Surface and Coatings Technology, 202(16), pp. 3960-3966.

‒ Li, R., Ashgriz, N., and Chandra, S., 2008, "Droplet generation from pulsed micro-jets," Experimental Thermal and Fluid Science, 32(8), pp. 1679-1686.

‒ Goghari, A. A., and Chandra, S., 2008, "Producing droplets smaller than the nozzle diameter by using a pneumatic drop-on-demand droplet generator," Experiments in Fluids, 44(1), pp. 105-114.

‒ Fang, M., Chandra, S., and Park, C. B., 2008, "Building three-dimensional objects by deposition of molten metal droplets," Rapid Prototyping Journal, 14(1), pp. 44-52.

‒ Colombo, V., Ghedini, E., and Mostaghimi, J., 2008, "Three-dimensional modeling of an inductively coupled plasma torch for spectroscopic analysis," IEEE transactions on plasma science, 36(4), pp. 1040-1041.

‒ Chen, L., Pershin, L., and Mostaghimi, J., 2008, "A new highly efficient high-power DC plasma torch," IEEE Transactions on Plasma Science, 36(4), pp. 1068-1069.

‒ Azarmi, F., Saaedi, J., Coyle, T. W., and Mostaghimi, J., 2008, "Microstructure characterization of alloy 625 deposited on nickel foam using air plasma spraying," Advanced Engineering Materials, 10(5), pp. 459-465.

‒ Azarmi, F., Coyle, T., and Mostaghimi, J., 2008, "Optimization of atmospheric plasma spray process parameters using a design of experiment for alloy 625 coatings," Journal of Thermal Spray Technology, 17(1), pp. 144-155.

‒ Xue, M., Heichal, Y., Chandra, S., and Mostaghimi, J., 2007, "Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance," Journal of materials science, 42(1), pp. 9-18.

‒ Xue, M., Chandra, S., Mostaghimi, J., and Salimijazi, H., 2007, "Formation of pores in thermal spray coatings due to incomplete filling of crevices in patterned surfaces," Plasma Chemistry and Plasma Processing, 27(5), pp. 647-657.

‒ Sun, Z., Rong, M., Wu, Y., Li, J., and Yang, F., 2007, "Thermal Plasmas: Fundamentals and Applications Thermal Plasmas: Fundamentals and Applications, 1994," IEICE transactions on electronics, 90(7), pp. 1348-1355.

‒ Soltani, R., Coyle, T. W., and Mostaghimi, J., 2007, "Creep Behavior of Plasma‐Sprayed Zirconia Thermal Barrier Coatings," Journal of the American Ceramic Society, 90(9), pp. 2873-2878.

‒ Shan, Y., Coyle, T. W., and Mostaghimi, J., 2007, "3D modeling of transport phenomena and the injection of the solution droplets in the solution precursor plasma spraying," Journal of Thermal Spray Technology, 16(5-6), pp. 736-743.

‒ Shan, Y., Coyle, T., and Mostaghimi, J., 2007, "Numerical simulation of the solution precursor plasma spraying process," Thermal Spray 2007: Global Coating Solutions, pp. 190-195.

‒ Shan, Y., Coyle, T., and Mostaghimi, J., 2007, "Numerical simulation of droplet breakup and collision in the solution precursor plasma spraying," Journal of Thermal Spray Technology, 16(5-6), pp. 698-704.

‒ Salimijazi, H., Raessi, M., Mostaghimi, J., and Coyle, T., 2007, "Study of solidification behavior and splat morphology of vacuum plasma sprayed Ti alloy by computational modeling and experimental results," Surface and Coatings Technology, 201(18), pp. 7924-7931.

‒ Salimijazi, H., Pershin, L., Coyle, T., Mostaghimi, J., Chandra, S., Lau, Y., Rosenzweig, L., and Moran, E., 2007, "Measuring substrate temperature variation during application of plasma-sprayed zirconia coatings," Journal of Thermal Spray Technology, 16(4), pp. 580-587.

‒ Salimijazi, H., Pershin, L., Coyle, T., Mostaghimi, J., Chandra, S., Lau, Y., Rosenzweig, L., and Moran, E., 2007, "Effect of droplet characteristics and substrate surface topography on the final morphology of plasma-sprayed zirconia single splats," Journal of Thermal Spray Technology, 16(2), pp. 291-299.

‒ Raessi, M., Mostaghimi, J., and Bussmann, M., 2007, "Advecting normal vectors: A new method for calculating interface normals and curvatures when modeling two-phase flows," Journal of Computational Physics, 226(1), pp. 774-797.

‒ Pershin, L., Chen, L., and Mostaghimi, J., 2007, "Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases."

‒ Pershin, L., Chen, L., and Mostaghimi, J., 2007, "Comparison of molecular and argon gases for plasma spraying," Thermal Spray 2007: Global Coating Solutions, pp. 266-269.

‒ Parizi, H. B., Rosenzweig, L., Mostaghimi, J., Chandra, S., Coyle, T., Salimi, H., Pershin, L., Mcdonald, A., and Moreau, C., 2007, "Numerical simulation of droplet impact on patterned surfaces," Journal of Thermal Spray Technology, 16(5-6), pp. 713-721.

‒ Mostaghimi, J., and Jia, L., 2007, "A Low Temperature Oxy-fuel Spray System."

‒ Mostaghimi, J., and Chandra, S., 2007, "Heat transfer in plasma spray coating processes," Advances in Heat Transfer, 40, pp. 143-204.

‒ Moradian, A., and Mostaghimi, J., 2007, "Surface tension measurement at high temperatures by using dynamics of melt flow," Journal of Fluids Engineering, 129(8), pp. 991-1001.

‒ Mcdonald, A., Xue, M., Chandra, S., Mostaghimi, J., and Moreau, C., 2007, "Melting and solidification: Processes and models/Experiments for solidification benchmarks: Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature," Comptes Rendus Mécanique, 335(5-6), pp. 351-356.

‒ Mcdonald, A., Xue, M., Chandra, S., Mostaghimi, J., and Moreau, C., 2007, "Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature," Comptes Rendus Mecanique, 335(5-6), pp. 351-356.

‒ Mcdonald, A., Moreau, C., and Chandra, S., 2007, "Effect of substrate oxidation on spreading of plasma-sprayed nickel on stainless steel," Surface and Coatings Technology, 202(1), pp. 23-33.

‒ Mcdonald, A., Moreau, C., and Chandra, S., 2007, "Thermal contact resistance between plasma-sprayed particles and flat surfaces," International Journal of Heat and Mass Transfer, 50(9-10), pp. 1737-1749.

‒ Li, R., Ashgriz, N., Chandra, S., and Andrews, J. R., 2007, "Solidification contact angles of molten droplets deposited on solid surfaces," Journal of Materials Science, 42(23), pp. 9511-9523.

‒ Jazi, H. S., Coyle, T., and Mostaghimi, J., 2007, "Understanding grain growth and pore elimination in vacuum-plasma-sprayed titanium alloy," Metallurgical and Materials Transactions A, 38(3), pp. 476-484.

‒ Fang, M., Chandra, S., and Park, C., 2007, "Experiments on remelting and solidification of molten metal droplets deposited in vertical columns," Journal of Manufacturing Science and Engineering, 129(2), pp. 311-318.

‒ Dhiman, R., Mcdonald, A. G., and Chandra, S., 2007, "Predicting splat morphology in a thermal spray process," Surface and Coatings Technology, 201(18), pp. 7789-7801.

‒ Chen, L., Mostaghimi, J., and Pershin, L., 2007, "Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases," Thermal Spray 2007: Global Coating Solutions, pp. 158-162.

‒ Xue, M., Chandra, S., and Mostaghimi, J., 2006, "Investigation of splat curling up in thermal spray coatings," Journal of thermal spray technology, 15(4), pp. 531-536.

‒ Soltani, R., Garcia, E., Coyle, T. W., Mostaghimi, J., Lima, R., Marple, B., and Moreau, C., 2006, "Thermomechanical behavior of nanostructured plasma sprayed zirconia coatings," Journal of thermal spray technology, 15(4), pp. 657-662.

‒ Salimijazi, H., Coyle, T., and Mostaghimi, J., 2006, "Vacuum plasma spraying: A new concept for manufacturing Ti-6Al-4V structures," JOM, 58(9), pp. 50-56.

‒ Raessi, M., Mostaghimi, J., and Bussmann, M., 2006, "Effect of surface roughness on splat shapes in the plasma spray coating process," Thin Solid Films, 506, pp. 133-135.

‒ Pershin, L., Chen, L., and Mostaghimi, J., 2006, "Study of DC Plasma Torch with Conventional and Cascaded Anode."

‒ Mcdonald, A., Raessi, M., Chandra, S., Mostaghimi, J., and Moreau, C., 2006, "Fragmentation of plasma-sprayed molybdenum particles on glass surfaces," ITSC 2006: Building on 100 Years of Success.

‒ Mcdonald, A., Lamontagne, M., Moreau, C., and Chandra, S., 2006, "Impact of plasma-sprayed metal particles on hot and cold glass surfaces," Thin Solid Films, 514(1-2), pp. 212-222.

‒ Mcdonald, A., Chandra, S., Lamontagne, M., and Moreau, C., 2006, "Photographing impact of plasma-sprayed particles on metal substrates," Journal of thermal spray technology, 15(4), pp. 708-716.

‒ Golozar, M., Mostaghimi, J., and Coyle, T., 2006, "Wear behaviour of nanostructured and conventional 8 wt-% Y2O3–ZrO2 coatings against Si3N4 ball," Surface engineering, 22(5), pp. 399-407.

‒ Golozar, M., Mostaghimi, J., and Coyle, T., 2006, "Wear resistance of nano structured and conventional Yttria-stabilized zirconia coatings," Iranian Journal of Materials Science and Engineering, 3(1and2), pp. 32-38.

‒ Golazar, M., Mostaghimi, J., and Coyle, T., 2006, "WEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS."

‒ Ghafouri-Azar, R., Mostaghimi, J., and Chandra, S., 2006, "Modeling development of residual stresses in thermal spray coatings," Computational Materials Science, 35(1), pp. 13-26.

‒ Chandra, S., Mcdonald, M. A., Raessi, M. M., Moreau, C., and Mostaghimi, J., 2006, "Fragmentation of Plasma-Sprayed Molybdenum Particles on Glass Surfaces."

‒ Abedini, A., Pourmousa, A., Chandra, S., and Mostaghimi, J., 2006, "Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spraying," Surface and Coatings Technology, 201(6), pp. 3350-3358.

‒ Shirani, E., Ashgriz, N., and Mostaghimi, J., 2005, "Interface pressure calculation based on conservation of momentum for front capturing methods," Journal of Computational Physics, 203(1), pp. 154-175.

‒ Shan, Y., and Mostaghimi, J., 2005, "Modeling injection of dense liquid sprays in radio frequency inductively coupled plasmas," Plasma chemistry and plasma processing, 25(3), pp. 193-214.

‒ Salimijazi, H., Coyle, T., Mostaghimi, J., and Leblanc, L., 2005, "Microstructure and failure mechanism in As-deposited, vacuum plasma-sprayed Ti-6Al-4V alloy," Journal of thermal spray technology, 14(2), pp. 215-223.

‒ Salimijazi, H., Coyle, T., Mostaghimi, J., and Leblanc, L., 2005, "Microstructure of vacuum plasma-sprayed boron carbide," Journal of thermal spray technology, 14(3), pp. 362-368.

‒ Raessi, M., and Mostaghimi, J., 2005, "Three-dimensional modelling of density variation due to phase change in complex free surface flows," Numerical Heat Transfer, Part B: Fundamentals, 47(6), pp. 507-531.

‒ Pourmousa, A., Mostaghimi, J., Abedini, A., and Chandra, S., 2005, "Particle size distribution in a wire-arc spraying system," Journal of thermal spray technology, 14(4), pp. 502-510.

‒ Moradian, A., and Mostaghimi, J., 2005, "High temperature surface tension measurement," IEEE Transactions on Plasma Science, 33(2), pp. 410-411.

‒ Mehdizadeh, N., Lamontagne, M., Moreau, C., Chandra, S., and Mostaghimi, J., 2005, "Photographing impact of molten molybdenum particles in a plasma spray," Journal of thermal spray technology, 14(3), pp. 354-361.

‒ Mehdi-Nejad, V., Mostaghimi, J., and Chandra, S., 2005, "Modeling interfacial heat transfer from single or multiple deforming droplets," International Journal of Computational Fluid Dynamics, 19(2), pp. 105-113.

‒ Hulse-Smith, L., Mehdizadeh, N. Z., and Chandra, S., 2005, "Deducing drop size and impact velocity from circular bloodstains," Journal of Forensic Science, 50(1), pp. JFS2003224-2003210.

‒ Heichal, Y., Chandra, S., and Bordatchev, E., 2005, "A fast-response thin film thermocouple to measure rapid surface temperature changes," Experimental Thermal and Fluid Science, 30(2), pp. 153-159.

‒ Heichal, Y., and Chandra, S., 2005, "Predicting thermal contact resistance between molten metal droplets and a solid surface," Journal of heat transfer, 127(11), pp. 1269-1275.

‒ Grossmannová, H., Krčma, F., and Slanska, K., 2005, "VOC destruction in atmospheric pressure plasma discharge," Proceedings of ISPC-17 (Toronto, Canada, 2005), pp. 1216-1217.

‒ Dolatabadi, A., Pershin, V., and Mostaghimi, J., 2005, "New attachment for controlling gas flow in the HVOF process," Journal of thermal spray technology, 14(1), pp. 91-99.

‒ Dhiman, R., and Chandra, S., 2005, "Freezing-induced splashing during impact of molten metal droplets with high Weber numbers," International journal of heat and mass transfer, 48(25-26), pp. 5625-5638.

‒ Cheng, S. X., Li, T., and Chandra, S., 2005, "Producing molten metal droplets with a pneumatic droplet-on-demand generator," journal of materials processing technology, 159(3), pp. 295-302.

‒ Azar, R. G., Yang, Z., Chandra, S., and Mostaghimi, J., 2005, "Impact of molten metal droplets on the tip of a pin projecting from a flat surface," International journal of heat and fluid flow, 26(2), pp. 334-347.

‒ Ashgriz, N., Cabot, W., Caboussat, A., Chua, B., Colella, P., Cook, A., Crockett, R., Crouseilles, N., Da Silva, F., and Daru, V., 2005, "Abdallah, NB, 129 Abdel-Khalik, SI, 493 Andersson, F., 274," Journal of Computational Physics, 203, pp. 761-762.

‒ Salimijazi, H., Coyle, T., Mostaghimi, J., and Leblanc, L., 2004, "Characterization of Vacuum Plasma Sprayed Boron Carbide," Thermal Spray 2004: Advancing in Technology and Application.

‒ Mehdizadeh, N. Z., Raessi, M., Chandra, S., and Mostaghimi, J., 2004, "Effect of substrate temperature on splashing of molten tin droplets," Journal of heat transfer, 126(3), pp. 445-452.

‒ Mehdizadeh, N. Z., Chandra, S., and Mostaghimi, J., 2004, "Formation of fingers around the edges of a drop hitting a metal plate with high velocity," Journal of Fluid Mechanics, 510, pp. 353-373.

‒ Mehdi‐Nejad, V., Mostaghimi, J., and Chandra, S., 2004, "Modelling heat transfer in two‐fluid interfacial flows," International journal for numerical methods in engineering, 61(7), pp. 1028-1048.

‒ Ghafouri-Azar, R., Mostaghimi, J., and Chandra, S., 2004, "Numerical study of impact and solidification of a droplet over a deposited frozen splat," International Journal of Computational Fluid Dynamics, 18(2), pp. 133-138.

‒ Dolatabadi, A., Mostaghimi, J., and Pershin, V., 2004, "Modeling dense suspension of solid particles in highly compressible flows," International Journal of Computational Fluid Dynamics, 18(2), pp. 125-131.

‒ Shan, Y., and Mostaghimi, J., 2003, "Numerical simulation of aerosol droplets desolvation in a radio frequency inductively coupled plasma," Spectrochimica Acta Part B: Atomic Spectroscopy, 58(11), pp. 1959-1977.

‒ Shahbazi, K., Paraschivoiu, M., and Mostaghimi, J., 2003, "Second order accurate volume tracking based on remapping for triangular meshes," Journal of Computational Physics, 188(1), pp. 100-122.

‒ Pershin, V., Lufitha, M., Chandra, S., and Mostaghimi, J., 2003, "Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings," Journal of Thermal Spray Technology, 12(3), pp. 370-376.

‒ Paula, K., and Ishigaki, T., 2003, "Mostaghi mi J. Nonequilibrated situations of pulse modulated Ar-H2and Ar-N2thermal plasmas at at mospheric pres-sure," Journal of Applied Physics.

‒ Paul, K., Ishigaki, T., Mostaghimi, J., and Sakuta, T., 2003, "Nonequilibrated situations of pulse modulated Ar–H 2 and Ar–N 2 thermal plasmas at atmospheric pressure," Journal of applied physics, 93(11), pp. 8867-8875.

‒ Mostaghimi, J., Chandra, S., Ghafouri-Azar, R., and Dolatabadi, A., 2003, "Modeling thermal spray coating processes: a powerful tool in design and optimization," Surface and Coatings Technology, 163, pp. 1-11.

‒ Mehdizadeh, N., Chandra, S., and Mostaghimi, J., 2003, "Adhesion of tin droplets impinging on a stainless steel plate: effect of substrate temperature and roughness," Science and Technology of advanced Materials, 4(2), pp. 173-181.

‒ Mehdi-Nejad, V., Mostaghimi, J., and Chandra, S., 2003, "Two-fluid heat transfer based on a volume tracking advection algorithm."

‒ Mehdi-Nejad, V., Mostaghimi, J., and Chandra, S., 2003, "Air bubble entrapment under an impacting droplet," Physics of fluids, 15(1), pp. 173-183.

‒ Ghafouri-Azar, R., Shakeri, S., Chandra, S., and Mostaghimi, J., 2003, "Interactions between molten metal droplets impinging on a solid surface," International Journal of Heat and Mass Transfer, 46(8), pp. 1395-1407.

‒ Ghafouri-Azar, R., Mostaghimi, J., Chandra, S., and Charmchi, M., 2003, "A stochastic model to simulate the formation of a thermal spray coating," Journal of thermal spray technology, 12(1), pp. 53-69.

‒ Dolatabadi, A., Mostaghimi, J., and Pershin, V., 2003, "Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel (HVOF) spray process," Journal of Materials Processing Technology, 137(1-3), pp. 214-224.

‒ Cui, Q., Chandra, S., and Mccahan, S., 2003, "The effect of dissolving salts in water sprays used for quenching a hot surface: Part 1—Boiling of single droplets," Journal of heat transfer, 125(2), pp. 326-332.

‒ Cui, Q., Chandra, S., and Mccahan, S., 2003, "The effect of dissolving salts in water sprays used for quenching a hot surface: Part 2—Spray cooling," Journal of heat transfer, 125(2), pp. 333-338.

‒ Cheng, S., and Chandra, S., 2003, "A pneumatic droplet-on-demand generator," Experiments in Fluids, 34(6), pp. 755-762.

‒ Shakeri, S., and Chandra, S., 2002, "Splashing of molten tin droplets on a rough steel surface," International Journal of Heat and Mass Transfer, 45(23), pp. 4561-4575.

‒ Pasandideh-Fard, M., Pershin, V., Chandra, S., and Mostaghimi, J., 2002, "Splat shapes in a thermal spray coating process: simulations and experiments," Journal of Thermal Spray Technology, 11(2), pp. 206-217.

‒ Pasandideh-Fard, M., Chandra, S., and Mostaghimi, J., 2002, "A three-dimensional model of droplet impact and solidification," International Journal of Heat and Mass Transfer, 45(11), pp. 2229-2242.

‒ Mostaghimi, J., Pasandideh-Fard, M., and Chandra, S., 2002, "In the study of SO 2 removal using pulsed corona discharge, there exists a serious confusion, that is, which kind of reactions, the thermal chemical reactions or the radical chemical reactions, plays a dominant role in SO 2 removal? In this work, through some experiments together with qualitative analyses, this confusion has been clarified. Pulsed corona discharge induces the radical reactions that," Plasma Chemistry and Plasma Processing, 22(1), pp. 187-195.

‒ Mostaghimi, J., Pasandideh-Fard, M., and Chandra, S., 2002, "Dynamics of splat formation in plasma spray coating process," Plasma Chemistry and Plasma Processing, 22(1), pp. 59-84.

‒ Mostaghimi, J., and Chandra, S., 2002, "Plenary and topical lectures presented at the 15th International Symposium on Plasma Chemistry, Orleans, France, 9-13 July 2001-Invited Topical Lectures-Splat formation in plasma-spray coating," Pure and Applied Chemistry, 74(3), pp. 441-446.

‒ Mostaghimi, J., and Chandra, S., 2002, "Splat formation in plasma-spray coating process," Pure and applied chemistry, 74(3), pp. 441-445.

‒ Mostaghimi, J., 2002, "Thermal spray research at the University of Toronto's Centre for Advanced Coating Technology," JOURNAL OF THERMAL SPRAY TECHNOLOGY, 11(2), pp. 156-158.

‒ Dolatabadi, A., Mostaghimi, J., and Pershin, V., 2002, "Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel spray process," Science and Technology of Advanced Materials, 3(3), pp. 245-255.

‒ Bussmann, M., Mostaghimi, J., Kirk, D., and Graydon, J., 2002, "A numerical study of steady flow and temperature fields within a melt spinning puddle," International journal of heat and mass transfer, 45(19), pp. 3997-4010.

‒ Ashgriz, N., and Mostaghimi, J., 2002, "An introduction to computational fluid dynamics," Fluid Flow Handbook, McGraw-Hill Professional, pp. 24.21-24.52.

‒ Thomson, I., Pershin, V., Mostaghimi, J., and Chandra, S., 2001, "Experimental testing of a curvilinear gas shroud nozzle for improved plasma spraying," Plasma chemistry and plasma processing, 21(1), pp. 65-82.

‒ Paul, K., Mostaghimi, J., Ishigaki, T., and Sakuta, T., 2001, "Transient response of radio frequency inductively coupled plasma for pulse modulation," Plasma Chemistry and Plasma Processing, 21(3), pp. 371-400.

‒ Pasandideh-Fard, M., Bussmann, M., and Chandra, S., 2001, "Simulating droplet impact on a substrate of arbitrary shape," Atomization and sprays, 11(4).

‒ Pasandideh-Fard, M., Aziz, S., Chandra, S., and Mostaghimi, J., 2001, "Cooling effectiveness during the impact of cold water droplets on a hot steel plate: simulations and experiments," International Journal of Heat and Fluid Flow, 22, pp. 201-210.

‒ Pasandideh-Fard, M., Aziz, S., Chandra, S., and Mostaghimi, J., 2001, "Cooling effectiveness of a water drop impinging on a hot surface," International journal of heat and fluid flow, 22(2), pp. 201-210.

‒ Ghafouri-Azar, R., Mostaghimi, J., and Chandra, S., 2001, "Deposition model of thermal spray coatings," Thermal Spray 2001: New Surfaces for a New Millennium, pp. 951-958.

‒ Cui, Q., Chandra, S., and Mccahan, S., 2001, "The effect of dissolving gases or solids in water droplets boiling on a hot surface," Journal of heat transfer, 123(4), pp. 719-728.

‒ Pasandideh-Fard, M., Chandra, S., and Mostaghimi, J., 2000, "1st International Thermal Spray Conference," Montreal, Quebec, p. 125.

‒ Mostaghimi, J., and Boulos, M., 2000, "RELATIONSHIP BETWEEN THE INDUCTION FRE-QUENCY AND LTE IN INDUCTIVELY COUPLED PLAS-MAS," Measurement, 5, p. 5.

‒ Mehdizadeh, N., Chandra, S., and Mostaghimi, J., 2000, "Splashing of a small droplet impinging on a solid surface at high velocity," ASME-PUBLICATIONS-HTD, 366, pp. 397-406.

‒ Jankovic, M., Mostaghimi, J., and Pershin, V., 2000, "Design of a new nozzle for direct current plasma guns with improved spraying parameters," Journal of Thermal Spray Technology, 9(1), pp. 114-120.

‒ Dolatabadi, A., Mostaghimi, J., and Ivanovic, M., 2000, "A Fully Eulerian Approach to Particle-Laden Compressible Flows," ASME-PUBLICATIONS-HTD, 366, pp. 225-230.

‒ Chae, Y., Mostaghimi, J., and Yoshida, T., 2000, "Deformation and solidification process of a super–cooled droplet impacting on the substrate under plasma spraying conditions," Science and Technology of Advanced Materials, 1(3), pp. 147-156.

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 2000, "Modeling the splash of a droplet impacting a solid surface," Physics of fluids, 12(12), pp. 3121-3132.

‒ Bussmann, M., Aziz, S., Chandra, S., and Mostaghimi, J., 2000, "Photographs and Simulations of Molten Metal Droplets Landing on a Solid Surface," Journal of Heat Transfer, 122(3), pp. 422-422.

‒ Aziz, S. D., and Chandra, S., 2000, "Impact, recoil and splashing of molten metal droplets," International journal of heat and mass transfer, 43(16), pp. 2841-2857.

‒ Sobolewski, K., Mostaghimi, J., and Tran, H., 1999, "Modelling of particle deposition on superheater tubes in kraft recovery boilers," International Journal of Modelling and Simulation, 19(3), pp. 262-270.

‒ Bussmann, M., Mostaghimi, J., and Chandra, S., 1999, "On a three-dimensional volume tracking model of droplet impact," Physics of Fluids, 11(6), pp. 1406-1417.

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 1999, "Numerical results of off-angle thermal spray particle impact," ITSC99 Proc, pp. 783-786.

‒ Bhola, R., and Chandra, S., 1999, "Parameters controlling solidification of molten wax droplets falling on a solid surface," Journal of materials science, 34(19), pp. 4883-4894.

‒ Qiao, Y., and Chandra, S., 1998, "Spray cooling enhancement by addition of a surfactant," Journal of Heat Transfer, 120(1), pp. 92-98.

‒ Pasandideh-Fard, M., Bhola, R., Chandra, S., and Mostaghimi, J., 1998, "Deposition of tin droplets on a steel plate: simulations and experiments," International Journal of Heat and Mass Transfer, 41(19), pp. 2929-2945.

‒ Mostaghimi, J., Paul, K., and Sakuta, T., 1998, "Transient response of the radio frequency inductively coupled plasma to a sudden change in power," Journal of applied physics, 83(4), pp. 1898-1908.

‒ Mostaghimi, J., 1998, "Modeling droplet impact in plasma spray processes," Pure and applied chemistry, 70(6), pp. 1209-1215.

‒ Jankovic, M., and Mostaghimi, J., 1998, "Thermally induced measurement error by a water-cooled enthalpy probe," Plasma chemistry and plasma processing, 18(1), pp. 53-71.

‒ Bastani-Parizi, H., and Mostaghimi, J., 1998, "Chemical kinetic calculations of the gas phase in atmospheric pressure microwave plasma-assisted chemical vapour deposition of diamond," International Journal of Modelling and Simulation, 18(1), pp. 16-25.

‒ Kim, J., Mostaghimi, J., and Iravani, R., 1997, "Performance analysis of a radio-frequency induction plasma generator using nonlinear state-space approach," IEEE transactions on plasma science, 25(5), pp. 1023-1028.

‒ Desilets, M., Bilodeau, J., and Proulx, P., 1997, "Modelling of the reactive synthesis of ultra-fine powders in a thermal plasma reactor," Journal of Physics D: Applied Physics, 30(13), p. 1951.

‒ Cai, M., Haydar, D. A., Montaser, A., and Mostaghimi, J., 1997, "Computer simulation of argon-nitrogen and argon-oxygen inductively coupled plasmas," Spectrochimica Acta Part B: Atomic Spectroscopy, 52(3), pp. 369-386.

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 1997, "LGGLLG GGGGGG GGGGGG GLLLLL GGG LLLLL GGG LGGGGGGG LLLLL."

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 1997, "Contributions from," Physics of Fluids, 9(9), p. S7.

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 1997, "Three-Dimensional Droplet Impact," Physics of Fluids, 9(9), pp. S7-S7.

‒ Bussmann, M., Chandra, S., and Mostaghimi, J., 1997, "Droplet impact onto arbitrary surface geometries," Proc. ASME Fluids Engineering.

‒ Buchner, P., Ferfers, H., Schubert, H., and Uhlenbusch, J., 1997, "Evaporation of copper powders in an inductively coupled thermal rf plasma-numerical modelling and spectroscopic measurements," Plasma Sources Science and Technology, 6(3), p. 450.

‒ Sakuta, T., Chandra, P. K., Shafiul, A. A., and Mostaghimi, J., 1996, "A Comparison of N_2, SF_6, and Argon Inductively Coupled Plasmas," 電気学会研究会資料. SP, 開閉保護研究会, 1996(62), pp. 151-160.

‒ Qiao, Y., and Chandra, S., 1996, "Boiling of droplets on a hot surface in low gravity," International Journal of Heat and Mass Transfer, 39(7), pp. 1379-1393.

‒ Passandideh Fard, M., Qiao, Y., Chandra, S., and Mostaghimi, J., 1996, "Capillary effects during droplet impact on a solid surface," Physics of Fluids, 8(3), pp. 650-660.

‒ Pasandideh‐Fard, M., Qiao, Y., Chandra, S., and Mostaghimi, J., 1996, "Capillary effects during droplet impact on a solid surface," Physics of fluids, 8(3), pp. 650-659.

‒ Pasandideh-Fard, M., and Mostaghimi, J., 1996, "Droplet impact and solidification in a thermal spray process: droplet-substrate interaction," Thermal spray: Practical Solutions for Engineering Problems, CC Berndt (Ed.), Pub. ASM International, Material Park, Ohio-USA, pp. 637-646.

‒ Pasandideh-Fard, M., Chen, P., Mostaghimi, J., and Neumann, A., 1996, "The generalized Laplace equation of capillarity I. Thermodynamic and hydrostatic considerations of the fundamental equation for interfaces," Advances in Colloid and Interface Science, 63, pp. 151-177.

‒ Chen, P., Susnar, S., Pasandideh-Fard, M., Mostaghimi, J., and Neumann, A., 1996, "The generalized Laplace equation of capillarity II. Hydrostatic and thermodynamic derivations of the Laplace equation for high curvatures," Advances in colloid and interface science, 63, pp. 179-193.

‒ Chandra, S., Di Marzo, M., Qiao, Y., and Tartarini, P., 1996, "Effect of liquid-solid contact angle on droplet evaporation," Fire safety journal, 27(2), pp. 141-158.

‒ Buckel, J. W., and Chandra, S., 1996, "Hot wire ignition of hydrogen-oxygen mixtures," International journal of hydrogen energy, 21(1), pp. 39-44.

‒ Shen, X., Kuhn, D., Tran, H., Mostaghimi, J., and Dees, C., 1995, "Simulation of flue gas flow in the upper furnace of a recovery boiler. Simulated results agree well with field measurements," Pulp & paper Canada, 96(5), pp. 44-47.

‒ Qiao, Y., and Chandra, S., 1995, "Impact of n-heptane droplets on a hot surface in low gravity," Transactions of the Canadian Society for Mechanical Engineering, 19(3), pp. 271-284.

‒ Pasandideh-Fard, M., and Mostaghimi, J., 1995, "On the spreading and solidification of molten particles in a plasma spray process effect of thermal contact resistance," Plasma chemistry and plasma processing, 16(1), pp. S83-S98.

‒ Jankovic, M., and Mostaghimi, J., 1995, "A new nozzle design for dc plasma spray guns," Plasma Chemistry and Plasma Processing, 15(4), pp. 607-628.

‒ Cox, B., Wong, Y., and Mostaghimi, J., 1995, "High conductivity porous oxides formed on Zr-2.5 wt% Nb," Journal of nuclear materials, 226(1-2), pp. 272-276.

‒ Cai, M., Montaser, A., and Mostaghimi, J., 1995, "Two-temperature model for the simulation of atmospheric-pressure helium ICPs," Applied spectroscopy, 49(10), pp. 1390-1402.

‒ Chen, K., and Boulos, M. I., 1994, "Turbulence in induction plasma modelling," Journal of Physics D: Applied Physics, 27(5), p. 946.

‒ Chandra, S., Lindsey, P., and Bassuk, N., 1994, "A gauge to measure the mass flow rate of water in trees," Plant, Cell & Environment, 17(7), pp. 867-874.

‒ Chandra, S., and Aziz, S., 1994, "Leidenfrost evaporation of liquid nitrogen droplets," Journal of heat transfer, 116(4), pp. 999-1006.

‒ Chabchoub, F., Argyropoulos, S., and Mostaghimi, J., 1994, "Mathematical modelling and experimental measurements on the horizontal ohno continuous casting process for pure tin," Canadian metallurgical quarterly, 33(1), pp. 73-88.

‒ Cao, M., Proulx, P., Boulos, M., and Mostaghimi, J., 1994, "Mathematical modeling of high‐power transferred arcs," Journal of Applied Physics, 76(12), pp. 7757-7767.

‒ Sakuta, T., Oguri, S., Takashima, T., and Boulos, M., 1993, "Effects of plasma diameter and operating frequency on dynamic behaviour of induction thermal plasma," Plasma Sources Science and Technology, 2(1), p. 67.

‒ Njah, Z., Mostaghimi, J., Faghri, M., and Boulos, M., 1993, "Study of 3-D mixing of a cold jet with a transverse plasma stream," International journal of heat and mass transfer, 36(16), pp. 3897-3907.

‒ Njah, Z., Mostaghimi, J., and Boulos, M., 1993, "Mathematical modelling of the 3-D mixing in an induction plasma reactor," International journal of heat and mass transfer, 36(16), pp. 3909-3919.

‒ Chabchoub, F., Mostaghimi, J., and Argyropoulos, S., 1993, "A three dimensional mathematical model for the horizontal Ohno continuous casting process," ASME-PUBLICATIONS-HTD, 196, pp. 69-69.

‒ Cai, M., Montaser, A., and Mostaghimi, J., 1993, "Computer simulation of atmospheric-pressure helium inductively coupled plasma discharges," Spectrochimica Acta Part B: Atomic Spectroscopy, 48(6-7), pp. 789-807.

‒ Mostaghimi, J., and Boulos, M., 1992, "Inductively coupled plasma in Analytical spectrometry," Montaser and DW Golightly, Eds. New York: VCH.

‒ Mostaghimi, J., 1992, "Mathematical modeling of the inductively coupled plasmas," Inductively Coupled Plasmas in Analytical Atomic Spectrometry.

‒ Chandra, S., and Avedisian, C., 1992, "Observations of droplet impingement on a ceramic porous surface," International journal of heat and mass transfer, 35(10), pp. 2377-2388.

‒ Proulx, P., Mostaghimi, J., and Boulos, M., 1991, "Radiative energy transfer in induction plasma modelling," International journal of heat and mass transfer, 34(10), pp. 2571-2579.

‒ Prouix, P., Mostaghini, J., and Boulos, M., 1991, "Modeling the vaporization of small metallic particles in a dc plasma jet," Heat Transfer in Themal Plasma Processing, HTD, ASME Publications, 161, pp. 155-T160.

‒ Lad, N., Aroussi, A., Adebayo, D., Chandra, S., Avedisian, C., Pasandideh-Fard, M., Bussmann, M., Chandra, S., Mostaghimi, J., and Hung, L., 1991, "Particle entrainment and turbulent mixing in free, shear-flows: Part 1. The naturally developing mixing layer," Journal of Applied Sciences, 11(10), pp. 13-41.

‒ Chandra, S., and Avedisian, C., 1991, "On the collision of a droplet with a solid surface," Proc. R. Soc. Lond. A, 432(1884), pp. 13-41.

‒ Zhao, G., Mostaghimi, J., and Boulos, M., 1990, "The induction plasma chemical reactor: part I. Equilibrium model," Plasma chemistry and plasma processing, 10(1), pp. 133-150.

‒ Zhao, G., Mostaghimi, J., and Boulos, M., 1990, "The induction plasma chemical reactor: Part II. Kinetic model," Plasma chemistry and plasma processing, 10(1), pp. 151-166.

‒ Proulx, P., Mostaghimi, J., and Boulos, M., 1990, "Loading and radiation effects in plasma jet modelling," Le Journal de Physique Colloques, 51(C5), pp. C5-263-C265-270.

‒ Mostaghimi, J., and Boulos, M. I., 1990, "Effect of frequency on local thermodynamic equilibrium conditions in an inductively coupled argon plasma at atmospheric pressure," Journal of Applied Physics, 68(6), pp. 2643-2648.

‒ Chandra, S., and Avedisian, C., 1990, "The collision of a droplet with a solid surface," Physics of Fluids A: Fluid Dynamics, 2(9), pp. 1525-1525.

‒ Chandra, S., and Avedisian, C., 1990, "Droplet combustion near a cold surface," Proc. R. Soc. Lond. A, 429(1877), pp. 481-503.

‒ Yang, P., Barnes, R. M., Mostaghimi, J., and Boulos, M. I., 1989, "Application of a two-dimensional model in the simulation of an analytical inductively coupled plasma discharge," Spectrochimica Acta Part B: Atomic Spectroscopy, 44(7), pp. 657-666.

‒ Mostaghimi, J., Dostie, M., and Jurewicz, J., 1989, "Analysis of an RF induction plasma torch with a permeable ceramic wall," The Canadian Journal of Chemical Engineering, 67(6), pp. 929-936.

‒ Mostaghimi, J., and Boulos, M. I., 1989, "Two-dimensional electromagnetic field effects in induction plasma modelling," Plasma chemistry and plasma processing, 9(1), pp. 25-44.

‒ Mostaghimi, J., 1989, "Two-dimensional Electromagnetic Field Effects in rf Inductively Coupled Plasmas," J. Plasma Chemistry Plasma Processing, 9, pp. 23-42.

‒ Etemadi, K., Zhao, G., and Mostaghimi, J., 1989, "Impact of cathode evaporation on a free-burning arc," Journal of Physics D: Applied Physics, 22(11), p. 1692.

‒ El‐Hage, M., Mostaghimi, J., and Boulos, M., 1989, "A turbulent flow model for the rf inductively coupled plasma," Journal of Applied Physics, 65(11), pp. 4178-4185.

‒ Chandra, S., and Avedisian, C., 1988, "The evaporation and combustion of levitated arrays of two, three and five droplets at a hot surface," Proc. R. Soc. Lond. A, 418(1855), pp. 365-382.

‒ Proulx, P., Mostaghimi, J., and Boulos, M. I., 1987, "Heating of powders in an rf inductively coupled plasma under dense loading conditions," Plasma Chemistry and Plasma Processing, 7(1), pp. 29-52.

‒ Proulx, P., Mostaghimi, J., and Boulos, M., 1987, "ISPC 8,(ed.) Akashi," University of Tokyo, 1, p. 13.

‒ Proulx, E., Mostaghimi, J., and Boulos, M., 1987, "Modeling of the thermal treatment of powders in a plasma jet under dense loading conditions," ISPC-8, Tokyo, pp. 13-18.

‒ Mostaghimi, J., Proulx, P., and Boulos, M. I., 1987, "A two‐temperature model of the inductively coupled rf plasma," Journal of applied physics, 61(5), pp. 1753-1760.

‒ Proulx, P., Mostaghimi, J., and Boulos, M. I., 1985, "Plasma-particle interaction effects in induction plasma modeling under dense loading conditions," International journal of heat and mass transfer, 28(7), pp. 1327-1336.

‒ Proulx, P., Mostaghimi, J., and Boulos, M., 1985, "Computer modeling of the emission patterns for a spectrochemical ICP," Int J Heat Mass Transfer, 28, pp. 1327-1336.

‒ Mostaghimi, J., Proulx, P., and Boulos, M. I., 1985, "An analysis of the computer modeling of the flow and temperature fields in an inductively coupled plasma," Numerical Heat Transfer, 8(2), pp. 187-201.

‒ Mostaghimi, J., Proulx, P., Boulos, M., and Barnes, R., 1985, "Computer modeling of the emission patterns for a spectrochemical ICP," Spectrochimica Acta Part B: Atomic Spectroscopy, 40(1-2), pp. 153-166.

‒ Mostaghimi-Tehrani, J., and Pfender, E., 1984, "Effects of metallic vapor on the properties of an argon arc plasma," Plasma chemistry and plasma processing, 4(2), pp. 129-139.

‒ Mostaghimi, J., Proulx, P., and Boulos, M. I., 1984, "Parametric study of the flow and temperature fields in an inductively coupled rf plasma torch," Plasma chemistry and plasma processing, 4(3), pp. 199-217.

‒ Mostaghimi, T., 1983, "THE EFFECT OF LOW IONIZATION POTENTIAL CONTAMINANTS ON THE TRANSPORT PROPERTIES OF THERMAL PLASMAS."

‒ Mostaghimi, J., and Pfender, E., 1980, "Measurement of thermal conductivities of soilsMessung der Bodenwärmeleitfähigkeit," Wärme-Und Stoffübertragung, 13(1-2), pp. 3-9.

‒ Zhao, G., Mostaghimi, J., Gravelle, D., Jurewicz, J., and Ël L, B., "NUMERICAL SIMULATION OF A PLASMA CHEMICAL REACTOR."

‒ Xu, P., Farrokhpanah, A., Mostaghimi, J., Coyle, T. W., and Pershin, L., "Suspension Plasma Spray of Zirconia Coatings."

‒ Xu, P., Coyle, T. W., Pershin, L., and Mostaghimi, J., "Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions," Journal of Thermal Spray Technology, pp. 1-13.

‒ Thomson, I., Pershin, V., Mostaghimi, J., and Chandra, S., "Experimental validation of a curvilinear nozzle design for improved dc plasma spraying."

‒ Tarasi, F., Coyle, T., and Mostaghimi, J., "Coating and Alloying the Ni-Foam for High Temperature Application."

‒ Shan, Y., Shen, C., Jia, L., and Mostaghimi, J., "Surface remelting is an important technique for modifying the microstructure of thermally sprayed coatings as it reduces the porosity and promotes a metallurgical bond between substrate and coating. Many studies have been carried out in the field of materials selection and surface engineering in an attempt to reduce cavitation damage. In this work, an Fe-Mn-Cr-Si alloy was deposited by arc spraying."

‒ Salimijazi, H., Raessi, M., Coyle, T., and Mostaghimi, J., "Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Alloy."

‒ Salimijazi, H., Mostaghimi, J., Coyle, T., Pershin, L., Chandra, S., Rosenzweig, L., Moran, E., and Lau, Y., "Temperature Evolution and Pore Distribution in Zirconia Footprint Deposits Using Atmospheric Plasma Spraying."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "Spectrochemicia Acta, Part B Spectrochemicia Acta, Part B 48B, 787, 1993."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "IEEE Trans. on Power Appar. and Syst. IEEE Trans. on Power Appar. and Syst. PAS-95, 1, 1976."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "IEEE Trans. Power Appr. Syst. IEEE Trans. Power Appr. Syst. PAS-98, 339, 1980."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "Inductively Coupled Plasma Emission Spectroscopy Inductively Coupled Plasma Emission Spectroscopy, 1987."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "IEEE Trans. on Power Appar. and Syst. IEEE Trans. on Power Appar. and Syst. PAS-103, 3561, 1984."

‒ Sakuta, T., Paul, K. C., Shafiul, A. A., and Mostaghimi, J., "Computational Fluid Flow and Heat Transfer Computational Fluid Flow and Heat Transfer, 1980."

‒ Rezaey, R., Loosmann, F., Tropea, C., Chandra, S., and Mostaghimi, J., "EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW IN LASER SINTERED HEAT EXCHANGERS."

‒ Raessi, M., and Mostaghimi, J., "Three-dimensional modeling of solidification shrinkage."

‒ Raessi, M., Bussmann, M., and Mostaghimi, J., "Advecting interface normal vectors: A novel method for accurate interface curvature calculation."

‒ Pershin, L., Chen, L., Mostaghimi, J., and Coyle, T., "Deposition of YSZ coating using molecular gases for DC plasma generation."

‒ Pasandideh-Fard, M., Bussmann, M., Chandra, S., and Mostaghimi, J., "Department of Mechanical and Industrial Engineering University of Toronto."

‒ Pasandideh-Fard, M., and Bhola, R. C., "S. and Mostaghimi, J., 1998a," International Journal of Heat and Mass Transfer, 41, pp. 2929-2945.

‒ Pasandideh-Fard, M., "Mostaghimi j.(1996)“Droplet impact and solidification in a thermal spray process: droplet-substrate interaction”, Thermal spray: Practical Solutions for Engineering Problems, CC Berndt (Ed.), Pub," ASM International, Material Park, Ohio-USA, pp. 637-646.

‒ Mostaghimi, J., Toronto, G. M., and Pfender, E., "Department of Mechanical Engineering."

‒ Mostaghimi, J., and García, M. E. C., "Investigación en Materiales."

‒ Mostaghimi, J., "Understanding Plasma Spray Coating Process: A Modeling Approach."

‒ Moradian, A., and Mostaghimi, J., "Application of radio frequency Inductively Coupled Plasma (rf-ICP) in the measurement of physical properties of melts."

‒ Moradian, A., and Mostaghimi, J., "Numerical based equations for drop detachment phenomenon."

‒ Mehdi-Nejad, V., Mostaghimi, J., and Chandra, S., "Two-Fluid Heat Transfer from Single or Multiple Droplets Using a One Field VOF Model."

‒ Kim, J., Mostaghimi, J., and Iravani, R., "A NUMERICAL STUDY OF THE MINIMUM SUSTAINABLE POWER FOR ARGON ICPs."

‒ Kashani, A., Mostaghimi, J., Badiei, H., and Kahen, K., "Numerical simulation of heat transfer mechanisms in RF-ICP torches running at low argon flow rates."

‒ Henderson, K., Esmaeelpanah, J., Chandra, S., and Mostaghimi, J., "CAUGHT ON CAMERA."

‒ Hafeez, P., Salavati, S., Esmaeelpanah, J., Chandra, S., Mostaghimi, J., and Coyle, T., "High Temperature Metal Foam Heat Exchanger."

‒ Ghafouri'azar, R., Mostaghimi, J., and Chandra, S., "Department of Mechanical and Industrial Engineering University of Toronto."

‒ Farrokhpanah, A., Samareh, B., and Mostaghimi, J., "GPU BASED MULTIPHASE SMOOTHED PARTICLE HYDRODYNAMICS (SPH)."

‒ Farrokhpanah, A., Pershin, L., and Mostaghimi, J., "Twin Wire Arc Torch with Optimized Flow Parameters."

‒ Farrokhpanah, A., Nabovati, A., and Mostaghimi, J., "Study of Curved Boundary Treatments in Lattice Boltzmann Method."

‒ Cao, M., Proulx, P., Mostaghimi, J., and Boulos, M., "A STUDY OF THE MODELLING OF HIGH POWER TRANSFERRED ARCS."

‒ Bussmann, M., Mostaghimi, J., Kirk, D., and Graydon, J., "A Numerical Study of Steady Flow and," http://lib-www. lanl. gov/la-pubs/00357001. pdf, p. 3.

‒ Bussmann, M., Mostaghimi, J., Chandra, S., and Tran, H., "NUMER1CAL MODELL1NG OF CARRYOVER DEPOS1T1ON 1N KRAFT RECOVERY BO1LERS."

‒ Ahmadian, O. S., Jazi, H. S., Fathi, M., Mostaghimi, J., and Pershin, L., "Wire Arc Spray Copper Coatings in Medical Applications."

‒ Ahmadian, O. S., Fathi, M., Jazi, H. S., and Mostaghimi, J., "Study of the microstructure and antibacterial behavior of the as-sprayed copper coatings."

‒ Abubakar, A. A., Arif, A. F. M., Akhtar, S. S., and Mostaghimi, J., "Splats Formation, Interaction and Residual Stress Evolution in Thermal Spray Coating Using a Hybrid Computational Model," Journal of Thermal Spray Technology, pp. 1-19.