Conference Proceedings

‒ Shalbaf, S.; Hashemi, M.; Jadidi, M.; Dolatabadi, A. In Breakup characteristics in plasma spraying of solution precursors and suspensions, International Conference on Liquid Atomization and Spray Systems (ICLASS), 2021.

‒ Khamsepour, P.; Moreau, C.; Dolatabadi, A. In Numerical Simulation of Solid Ti6AI4V Particles Impinging on a Stainless-Steel Substrate at High Speed: Influence of the Particle Temperature, ITSC2021, ASM International: 2021; pp 402-409.

‒ Jalilvand, V.; Dolatabadi, A.; Moreau, C.; Mohammadkhani, S.; Roué, L.; Guay, D. In Formation of Solid Solution and Metallic Nickel Phases During Suspension Plasma Spraying of Co Oxide and Ni Oxide, ITSC2021, ASM International: 2021; pp 515-521.

‒ Jadidi, M.; Shaghaghian, S.; Dworkin, S. B.; Dolatabadi, A. In An Artificial Neural Network for the Prediction of Penetration Height of Aerated Elliptical Liquid Jets in Gaseous Crossflows, International Conference on Liquid Atomization and Spray Systems (ICLASS), 2021.

‒ Dehaghani, S. T.; McDonald, A.; Dolatabadi, A. In Effect of Ceramic Particle Reinforcement on the Erosion Resistance of Thermally Sprayed De-Icing Systems, ITSC2021, ASM International: 2021; pp 708-715.

‒ Yvenou, E.; Bily, A.; Dolatabadi, A.; Moreau, C.; Davis, B.; Guay, D.; Roué, L. In TiB2-Coated Graphite As Wettable Cathode for Al Production, ECS Meeting Abstracts, IOP Publishing: 2020; p 1253.

‒ Mohammadkhani, S.; Jalilvand, V.; Dolatabadi, A.; Moreau, C.; Davis, B.; Guay, D.; Roué, L. In (Co, Ni) O Coated Anodes for CO2-Free Al Production, ECS Meeting Abstracts, IOP Publishing: 2020; p 2911.

‒ Mohammadkhani, S.; Jalilvand, V.; Dolatabadi, A.; Moreau, C.; Davis, B.; Guay, D.; Roue, L. In Synthesis and Characterization of (Co, Ni) O Solid Solutions As Protective Coatings for Inert Anodes in Aluminum Electrolysis, ECS Meeting Abstracts, IOP Publishing: 2020; p 3759.

‒ Marzbali, M.; Dolatabadi, A. In 2D axisymmetric modelling of single liquid droplet impingement at high speeds on thin liquid films in compressible regime, Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering (MCM’20), Prague, 2020.

‒ Marzbali, M.; Dolatabadi, A. In Modeling of liquid droplet impingement onto Ti-6Al-4V substrate, The 5th World Congress on Mechanical, Chemical, and Material Engineering, Lisbon, 2019.

‒ Marzbali, M.; Dolatabadi, A. In High-speed droplet impingement in compressible regime, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering, Lisbon, 2019.

‒ Garmeh, S.; Jadidi, M.; Dolatabadi, A. In Cold Spray for Additive Manufacturing: Possibilities and Challenges, Key Engineering Materials, Trans Tech Publications Ltd: 2019; pp 423-428.

‒ Yeganehdoust, F.; Karimfazli, I.; Dolatabadi, A. In Numerical Analysis of Droplet Impact on a Smooth Slippery Surface, Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers: 2018; p V001T15A005.

‒ Jadidi, M.; Farzad, M.; Trepanier, J.; Dolatabadi, A. In Effects of ambient air relative humidity and surface temperature on water droplet spreading dynamics, Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers: 2018; p V001T15A006.

‒ Tembely, M.; AlSumaiti, A. M.; Jouini, M. S.; Rahimov, K.; Dolatabadi, A. In Simulating single-phase and two-phase non-Newtonian fluid flow of a digital rock scanned at high resolution, APS Division of Fluid Dynamics Meeting Abstracts, 2017; p D15. 004.

‒ LAROCHE, A.; DOLATABADI, A.; HOA, S. In Icing Protection System for Composite Structures Using Carbon Fiber Heating Elements, Proceedings of the American Society for Composites: Thirty-First Technical Conference, 2016.

‒ Tembely, M.; Dizon, I.; Dolatabadi, A. In A Combined Lagrangian-Thin Film Model for Investigating Film to Rivulet Transition on Surfaces with Various Wettabilities, APS Division of Fluid Dynamics Meeting Abstracts, 2015; p R16. 007.

‒ Saranjam, N.; Chandra, S.; Mostaghimi, J. In MOTION OF BUBBLES AND PARTICLES IN A DRYING PAINT LAYER DUE TO SURFACE-TENSION-DRIVEN FLOWS, ASTFE Digital Library, Begel House Inc.: 2015.

‒ Saito, H.; Nakane, Y.; Fujino, T.; Takana, H.; Mostaghimi, J. In OS22-5 Three-dimensional Simulation of a Non-transferred DC Plasma Torch with a Mixture Gas of Carbon Dioxide and Methane (Plasma and Magnetohydrodynamics, OS22 Experimental method in fluid mechanics, FLUID AND THERMODYNAMICS), The Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics 2015.14, The Japan Society of Mechanical Engineers: 2015; p 269.

‒ Farrokhpanah, A.; Naffrechoux, J.; Pershin, L.; Mostaghimi, J. In Investigation of Flow Parameters in Wire Arc Thermal Spraying Using CFD Simulation, Thermal Spray 2015: Proceedings of the International Thermal Spray Conference, 2015.

‒ Esmaeelpanah, J.; Cherukupally, P.; Chandra, S.; Mostaghimi, J. In Numerical and experimental investigation of bubble attachment to a substrate, Proc. of the TFESC Conf, 2015.

‒ Dalili, A.; Chandra, S.; Mostaghimi, J. In Formation of liquid sheets by deposition of mono-disperse sprays on a flat surface, ASTFE Digital Library, Begel House Inc.: 2015.

‒ Attarzadeh, S.; Dolatabadi, A.; Chun Kim, K. In Numerical modelling of microdroplet self-propelled jumping on micro-textured surface, APS Division of Fluid Dynamics Meeting Abstracts, 2015; p L6. 008.

‒ Ardakani, E. S.; Mostaghimi, J. In Arc Fluctuation Modeling in Non Transferred Direct Current Argon Plasma Torch, 22nd International Symposium on Plasma Chemistry, Antwerp, Belgium, 2015.

‒ Amiri, S.; Akbarnozari, A.; Moreau, C.; Dolatabadi, A. In Velocity and size distribution measurement of suspension droplets using PDPA technique, APS Division of Fluid Dynamics Meeting Abstracts, 2015; p R27. 012.

‒ Amini, G.; Jadidi, M.; Dolatabadi, A. In Stability of a liquid jet in a weak crossflow, APS Division of Fluid Dynamics Meeting Abstracts, 2015; p M17. 005.

‒ Al-Athel, K. S.; Aly, S. P.; Arif, A. F. M.; Mostaghimi, J. In Thermal behavior of aluminum alloy metal foam heat sinks: a computational and experimental approach, ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2015; pp V001T09A008-V001T09A008.

‒ Saranjam, N.; Chandra, S.; Mostaghimi, J.; Fan, H.; Simmer, J. In Surface tension-driven flows within drying paint films, Proceedings of the 15th International Heat Transfer Conference, 2014.

‒ Mohammadi, M.; Attarzadeh, M.; Tembely, M.; Dolatabadi, A. In Dynamic of water droplet impacting on a hydrophilic surface accompanied with stagnation flow, Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers: 2014; p V01AT05A010.

‒ Moghtadernejad, S.; Jadidi, M.; Esmail, N.; Dolatabadi, A. In Shear driven rivulet dynamics on surfaces with various wettabilities, ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers: 2014; p V007T09A009.

‒ Jadidi, M.; Tembely, M.; Moghtadernejad, S.; Dolatabadi, A. In A coupled level set and volume of fluid method with application to compressible two-phase flow, Proceedings of the 22nd Annual Conference of the CFD Society of Canada, Toronto, ON, Canada, 2014; pp 1-4.

‒ Gomaa, H.; Tembely, M.; Esmail, N.; Dolatabadi, A. In Impact of Micro-Droplets on Superhydrophobic and Hydrophilic Surfaces, Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers: 2014; p V01AT05A008.

‒ Farrokhpanah, A.; Mostaghimi, J. In Application of multiphase particle methods in atomization and breakup regimes of liquid jets, ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2014; pp V01AT05A009-V01AT05A009.

‒ Esmaeelpanah, J.; Dalili, A.; Chandra, S.; Mostaghimi, J. In Leveling of a Line of Paint Droplets on a Surface, ASME 2014 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers: 2014; pp V007T09A039-V007T09A039.

‒ Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H. C.; Simmer, J. In Bubble Entrapment in Sprayed Films, ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2014; pp V01AT05A011-V01AT05A011.

‒ Sharifi, N.; Ettouil, F. B.; Mousavi, M.; Pugh, M.; Moreau, C.; Dolatabadi, A. In Superhydrophoibcity and water repelling characteristics of thermally sprayed coatings, International Thermal Spray Conference and Exposition (ITSC), 2013.

‒ Salavati, S.; Rezaey, R.; Pershin, L.; Coyle, T.; Mostaghimi, J. In Development of high density twin wire arc sprayed coatings on metallic foam substrates ab, Proceedings of the International Thermal Spray Conference, 2013; pp 345-350.

‒ Nejad, M.; Pershin, L.; Mostaghimi, J.; Ringuette, M. In Evaluation of bioactivity of copper alloy coatings, Proceedings of 21st International Symposium on Plasma Chemistry (ISPC 21), 2013; pp 4-9.

‒ Mohammadi, M.; De Pauw, D.; Tembely, M.; Dolatabadi, A. In Droplet impact and solidification on hydrophilic and superhydrophobic substrates in icing conditions, 43rd AIAA Fluid Dynamics Conference, 2013; p 2486.

‒ Marzbali, M.; Dolatabadi, A.; Jedrzejowski, P. In Fluid-solid interaction modeling of compressible droplet impact onto elastic substrates, 21st AIAA Computational Fluid Dynamics Conference, 2013; p 2458.

‒ Hafeez, P.; Esmaeelpanah, J.; Chandra, S.; Mostaghimi, J. In Heat transfer through metal-foam heat exchanger at higher temperature, ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, American Society of Mechanical Engineers: 2013; pp V002T04A006-V002T04A006.

‒ Esmaeelpanah, J.; Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H. In Numerical simulation of droplet coalescence and bubble entrapment, ILASS Americas, 25th Annual Conference on Liquid Atomization and Spray Systems, Pittsburgh, PA, 2013.

‒ Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H.; Simmer, J. In Formation of Liquid Sheets by Spraying on a Surface, Proc. ILASS Americas, 25th Annual Conf. on Liquid Atomization and Spray Systems (Pittsburgh, PA), 2013.

‒ Aghasibeig, M.; Mousavi, M.; Ettouill, F.; Wuthrich, R.; Dolatabadi, A.; Moreau, C. In Electro-Catalytically Active Porous Nickel-Based Electrode Coatings Formed by Atmospheric and by Suspension Plasma Spraying, International Thermal Spray (ITSC) Conference and Exposition, 2013; pp 13-15.

‒ Taheri, M.; Chandra, S.; Mostaghimi, J. In Analytical and Numerical Modeling of Conductive and Convective Heat Transfer Through Open-Cell Metal Foams, ASME 2012 Heat Transfer Summer Conference collocated with the ASME 2012 Fluids Engineering Division Summer Meeting and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2012; pp 1013-1021.

‒ Samareh, B.; Kashani, A.; Mostaghimi, J. In Mono-Disperse Spray Generation by a Flow Focusing Atomizer: A Numerical Study, ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2012; pp 1245-1251.

‒ Montazeri, H.; Azarmi, F.; Coyle, T. W.; Mostaghimi, J. In An Analytical Technique for Optimization of Mechanical Performance of Foam Core Sandwich Structures, Materials Science Forum, Trans Tech Publications: 2012; pp 1373-1378.

‒ Mohammadi, M.; Moghtadernejad, S.; Graham, P. J.; Dolatabadi, A. In Dynamic impact behavior of water droplet on a superhydrophobic surface in the presence of stagnation flow, Applied Mechanics and Materials, Trans Tech Publications Ltd: 2012; pp 267-272.

‒ Graham, P.; De Pauw, D.; Dolatabadi, A. In Wettability effects on droplet coalescence, APS Division of Fluid Dynamics Meeting Abstracts, 2012; p D4. 005.

‒ Farvardin, E.; Dolatabadi, A. In Numerical Simulation of Breakup of Elliptical Liquid Jet in Still Air, Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers: 2012; pp 663-667.

‒ Farvardin, E.; Dolatabadi, A. In Simulation of biodiesel jet in cross flow, Proceedings of the 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, 2012; pp 2-6.

‒ Farvardin, E.; Dolatabadi, A. In Breakup simulation of elliptical liquid jet in gaseous crossflow, 42nd AIAA Fluid Dynamics Conference and Exhibit, 2012; p 2817.

‒ Farrokhpanah, A.; Samareh, B.; Mostaghimi, J. In Droplet Impact: A GPU Based Smoothed Particle Hydrodynamics (SPH) Approach, ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2012; pp 615-623.

‒ Esmaeelpanah, J.; Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H.; Kuo, H. In Interactions Between High-Viscosity Droplets Deposited on a Surface: Experiments and Simulations, ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2012; pp 599-603.

‒ Esfarjani, S. A.; Dworkin, S.; Mostaghimi, J.; Kim, K.; Kingston, C.; Simard, B.; Soucy, G. In Detailed numerical simulation of single-walled carbon nanotube synthesis in a radio-frequency induction thermal plasma system, Journal of Physics: Conference Series, IOP Publishing: 2012; p 012011.

‒ De Pauw, D.; Graham, P.; Dolatabadi, A. In High speed imaging in icing windtunnel tests, APS Division of Fluid Dynamics Meeting Abstracts, 2012; p M28. 002.

‒ Amini, G.; Ihme, M.; Dolatabadi, A. In Convective and Absolute Instability of Liquid Jets under Gravity Effects, APS Division of Fluid Dynamics Meeting Abstracts, 2012; p L10. 003.

‒ Alavi, S.; Passandideh-Fard, M.; Mostaghimi, J. In Simulation of fluid flow and heat transfer including phase change during the impact of semi-molten particles, ASME 2012 Heat Transfer Summer Conference collocated with the ASME 2012 Fluids Engineering Division Summer Meeting and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers: 2012; pp 417-427.

‒ Mostaghimi, J.; Arabzadeh Esfarjani, S.; Dworkin, S.; Simard, B.; Kim, K. S.; Soucy, G.; Shahverdi, A. In CFD Simulation of Single-walled Carbon Nanotube Growth in an RF Induction Thermal Plasma Process, 42nd AIAA Plasmadynamics and Lasers Conference in conjunction with the 18th International Conference on MHD Energy Conversion (ICMHD), 2011; p 3600.

‒ Marzbali, M.; Dolatabadi, A. In Near-field trajectory of circular liquid jets injected into subsonic gaseous crossflow, 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 2011; p 186.

‒ Esfarjani, S. A.; Mostaghimi, J.; Shahverdi, A.; Soucy, G.; Kim, K. S.; Kingston, C.; Simard, B. In Parametric study of thermo-flow fields in an inductively coupled RF plasma processing system for the production of single-walled carbon nanotubes, 20th International Symposium on Plasma Chemistry (ISPC20), 2011.

‒ Amini, G.; Dolatabadi, A. In Breakup of liquid jets emerging from elliptic orifices, Turbo Expo: Power for Land, Sea, and Air, 2011; pp 417-424.

‒ Amini, G.; Dolatabadi, A. In The Effect of Orifice Eccentricity on Instability of Liquid Jets, APS Division of Fluid Dynamics Meeting Abstracts, 2011; p R25. 003.

‒ Amini, G.; Dolatabadi, A. In Dispersion of capillary waves in elliptical cylindrical jets, APS Division of Fluid Dynamics Meeting Abstracts, 2011; p LA. 052.

‒ SadAbadi, H.; Packirisamy, M.; Dolatabadi, A.; Wuthrich, R. In Effects of electrode switching sequence on EWOD droplet manipulation: a simulation study, International Conference on Nanochannels, Microchannels, and Minichannels, 2010; pp 255-260.

‒ Hu, X.; Dolatabadi, A. In Linear Stability of a Thin Liquid Film Flowing Along an Inclined Surface, Fluids Engineering Division Summer Meeting, 2010; pp 1773-1778.

‒ Amini, G.; Dolatabadi, A. In Capillary Instability of Liquid Jets Issuing From Elliptic Nozzles, Fluids Engineering Division Summer Meeting, 2010; pp 1779-1785.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C. In Phase Formation in Alumina/YSZ Nano-Composite Coating Deposited by Suspension Plasma Spray Process, Thermal Spray 2009: Proceedings of the International Thermal Spray Conference, 2009; pp 4-7.

‒ Pourmousa, A.; Montazeri, H.; Mostaghimi, J. In Sharp Surface Tension Force for Level-Set Method in Multiphase Flow Modeling, 11th International Annual Conference on Liquid Atomization and Spray Systems, 2009.

‒ Khavari, M.; Passandideh Fard, M.; Mostaghimi, J. In THE IMPINGEMENT OF A NORMAL LIQUID JET ON A HORIZONTAL SURFACE, 20th International Symposium on Transport Phenomena, 2009.

‒ Jazi, H. S.; Azarmi, F.; Coyle, T. W.; Mostaghimi, J. In Study of the relationship between the young's modulus and microstructure of vacuum plasma sprayed boron carbide, Mechanical Properties and Performance of Engineering Ceramics and Composites: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, Jan 23-28, 2005, Cocoa Beach, FL, John Wiley & Sons: 2009; p 235.

‒ Garcia, E.; Soltani, R.; Coyle, T. W.; Mostaghimi, J.; De Pablos, A.; Osendi, M. I.; Miranzo, P. In THERMAL BEHAVIOUR OF THERMAL BARRIER COATINGS AND STEEL] THERMAL BARRIER COATINGS STRUCTURES, Advances in Ceramic Coatings and Ceramic-Metal Systems: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida, Ceramic Engineering and Science Proceedings, Wiley-American Ceramic Society: 2009; p 137.

‒ Tanaka, Y.; Mostaghimi, J. In Modeling on rapid ablation/sublimation from the surface of solid particles injected into thermal plasmas, Plasma Science, 2008. ICOPS 2008. IEEE 35th International Conference on, IEEE: 2008; pp 1-1.

‒ Salimijazi, H.; Pershin, L.; Coyle, T.; Mostaghimi, J.; Chandra, S. In Metal foam sandwich structure as a high temperature heat exchanger, 2008 International Thermal Spray Conference & Exposition, 2008.

‒ Rajabi, N.; Dolatabadi, A. In Effect of electrode shape on droplet actuation in electrowetting-based microfluidics, ASME International Mechanical Engineering Congress and Exposition, 2008; pp 1015-1020.

‒ Movassat, M.; Maftoon, N.; Dolatabadi, A. In A three-dimensional numerical study of the breakup length of liquid sheets, ILASS Americas, 21th Annual Conference on Liquid Atomization and Spray Systems, Orlando, Florida, 2008.

‒ Kim, K. S.; Soucy, G.; Moradian, A.; Mostaghimi, J. In Modeling of continuous synthesis of single-walled carbon nanotubes by RF induction thermal plasma, Plasma Science, 2008. ICOPS 2008. IEEE 35th International Conference on, IEEE: 2008; pp 1-1.

‒ Shan, Y.; Coyle, T.; Mostaghimi, J. In Influence of Droplet Breakup and Collision in the Solution Precursor Plasma Spraying Process, Thermal Spray 2007: Global Coating Solutions: Proceedings of the 2007 International Thermal Spray Conference, ASM International: 2007; p 260.

‒ Pershin, L.; Chen, L.; Mostaghimi, J. In Deposition of YSZ Coatings by a High Efficiency DC Plasma Torch, Proceedings of the 21 International Conference on Surface Modification Technologies, 2007; pp 24-26.

‒ Hu, X.; Dolatabadi, A.; Siddiqul, K. In Analysis of Numerical Simulation on Near Surface Beneath Clean and Contaminated Small-Scale Wind-Driven Water Waves, Fluids Engineering Division Summer Meeting, 2007; pp 335-339.

‒ Azarmi, F.; Moradian, A.; Mostaghimi, J.; Coyle, T. W.; Pershin, L. In Microstructure characterization and modeling of splat formation during air plasma spraying for inconel 625 superalloy, Materials science forum, Trans Tech Publications: 2007; pp 1218-1223.

‒ Azarmi, F.; Moradian, A.; Mostaghimi, J.; Coyle, T.; Pershin, L. In PART 2-4 Surface Engineering/Coatings-Microstructure Characterization and Modeling of Splat Formation during Air Plasma Spraying for Inconel 625 Superalloy, Materials Science Forum, 2007; p 1218.

‒ Arzpeyma, A.; Dolatabadi, A.; Wood-Adams, P. In A 3-D Numerical Modeling of Droplet Actuation via Electrowetting in Microchannels, Fluids Engineering Division Summer Meeting, 2007; pp 363-367.

‒ Arabzadeh, S.; Dolatabadi, A. In Suspension Spray in a Twin-Fluid Atomizer, Fluids Engineering Division Summer Meeting, 2007; pp 577-583.

‒ Zhu, Q.; Dolatabadi, A. In Computational Modeling of Cold Spray Process: Effect of Substrate and Particle Size on Gas-Particle Flow, Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, May: 2006; pp 15-18.

‒ Xue, M.; Mostaghimi, J.; Chandra, S. In Formation of pores in thermal spray coatings due to incomplete filling of voids under solid particles, Proc. Int. Thermal Spray Conf., Seattle, Washington, USA, 2006.

‒ Srivatsan, V.; Dolatabadi, A. In Simulation of Particle-Shock Interaction in a HVOF Process, Proceedings of the 2006 International Thermal Spray Conference. Seattle, Washington (USA), May 15-18, 2006.

‒ Salimijazi, H.; Pershin, L.; Coyle, T.; Mostaghimi, J.; Rosenzweig, L.; Moran, E. In Effect of substrate temperature and droplet characteristics on plasma sprayed zirconia splats, Proceedings of the International Thermal Spray Conference, 2006.

‒ Moradian, A.; Mostaghimi, J. In MEASUEREMENT OF THERMO-PHYSCIAL PROPERTIES OF MELTS BY DROP OSCILLATION METHOD, Proceedings of the Unified International Technical Conference on Refractories: UNITECR'05 Worldwide Congress, 2006; pp 734-738.

‒ Moradian, A.; Mostaghimi, J. In MEASUREMENT OF THERMO-PHYSICAL PROPERTIES OF MELTS BY DROP OSCILLATION METHOD OSCILLATION METHOD, Unitecr'05. Proc. Unified Int. Tech. Conf. on Refractories. 9 th Biennial Worldwide Congress on Refractories, 2006; pp 734-738.

‒ Mehdizadeh, N. Z.; Chandra, S. In Boiling during high-velocity impact of water droplets on a hot stainless steel surface, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, The Royal Society: 2006; pp 3115-3131.

‒ Wu, B.; Lin, L.; Yang, C.; Wu, C.-K. In Fluid model for dc glidarc discharge plasma, Proceedings of the 17th International Symposium on Plasma Chemistry, 2005; pp 187-188.

‒ Sailmi Jazi, H.; Azarmi, F.; Coyle, T.; Mostaghimi, J. In Processing and Properties of Ceramics-Study of the Relationship Between the Young's Modulus and Microstructure of Vacuum Plasma Sprayed Boron Carbide, Ceramic Engineering and Science Proceedings, [Columbus, Ohio, American Ceramic Society]: 2005; pp 235-244.

‒ Moradian, A.; Mostaghimi, J. In Surface tension measurement at high temperatures by using numerical and theoretical drop profiles, ASME 2005 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers: 2005; pp 37-43.

‒ Moradian, A.; Mostaghimi, J. In High Temperature Tensiometry by a Coupled Modeling and Experimental Approach, Proceedings of the International Thermal Spray Conference, Basel, Switzerland, proceedings on DVD, 2005.

‒ Moradian, A.; Mostaghimi, J. In A New Surface Tension Measurement Technique for High-Melting-Point-Materials, Proceedings of the International Symposium Plasma Chemistry, Toronto, Canada, 2005; pp 939-940.

‒ Mohseni, K.; Dolatabadi, A. In Electrowetting droplet actuation in micro scale devices, 43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005; p 677.

‒ Golozar, M.; Mostaghimi, J.; Coyle, T.; Soltani, R. In Wear Behavior of Nanostructured and Conventional Y-PSZ Coatings, Materials Degradation: Innovation, Inspection, Control and Rehabilitation, Proceedings of the International Symposium on Materials Degradation: Innovation, Inspection, Control and Rehabilitation, 2005; pp 21-24.

‒ Dolatabadi, A.; Mohseni, K. In Behavior of a moving droplet under electrowetting actuation in microchannel, 2005 International Conference on MEMS, NANO and Smart Systems, IEEE: 2005; pp 95-96.

‒ Xue, M.; Mostaghimi, J.; Chandra, S. In Prediction of coating microstructure, ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, 2004; pp 776-781.

‒ Soltani, R.; Coyle, T.; Mostaghimi, J. In Thermomechanical behaviour of bimodal structured thermal barrier coatings, ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, 2004; pp 1068-1071.

‒ Pourmousa, A.; Abedini, A.; Mostaghimi, J.; Chandra, S. In Particle diagnostics in wire-arc spraying system, ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, 2004; pp 962-967.

‒ Passandideh Fard, M.; Ashgriz, N.; Mostaghimi, J. In Computational characterization of splash plate atomizers, Proceedings of the 17th Annual Conference on Liquid Atomization and Spray Systems, 2004.

‒ Mehdi-Nejad, V.; Mostaghimi, J.; Chandra, S. In Effect of Interfacial Heat Transfer on Molten Tin Jet Breakup in an Oil Tank, ASME 2004 Heat Transfer/Fluids Engineering Summer Conference, American Society of Mechanical Engineers: 2004; pp 167-173.

‒ Fard, M.; Ashgriz, N.; Mostaghimi, J. In A numerical model for flow simulation in spray nozzles, 42nd AIAA Aerospace Sciences Meeting and Exhibit, 2004; p 1156.

‒ Abedini, A.; Pourmousa, A.; Chandra, S.; Mostaghimi, J. In Splat formation in wire arc spraying, ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, 2004; pp 645-650.

‒ Soltani, R.; Coyle, T.; Mostaghimi, J. In Wear resistance of nanostructured thermal barrier coatings, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 1535-1540.

‒ Shan, Y.; Mostaghimi, J. In Modeling of transport and evaporation of liquid droplets sprayed into RF-ICPs, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 1017-1022.

‒ Salimijazi, H.; Coyle, T.; Mostaghimi, J.; Leblanc, L.; Tsantrizos, P. In Microstructural formation of vacuum plasma sprayed Ti-6 Al-4 V alloy, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 611-616.

‒ Parizi, H. B.; Passandideh-Fard, M.; Dolatabadi, A. In A computer code to design liquid containers for vehicles, Proceedings of the 11th Annual Conference of the CFD Society of Canada, 2003.

‒ Levesque, D.; Morrison, S.; Fard, M.; Mostaghimi, J. In Simulation of the spray characteristics of black liquor, ANNUAL MEETING-PULP AND PAPER TECHNICAL ASSOCIATION OF CANADA, Pulp and Paper Technical Association of Canada; 1999: 2003; pp 36-36.

‒ Leblanc, L.; Tsantrizos, P.; Salimijazi, H.; Coyle, T.; Mostaghimi, J. In On vacuum plasma spray forming of Ti-6 Al-4 V, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 603-609.

‒ Ghafouri-Azar, R.; Chandra, S.; Mostaghimi, J. In Modeling residual stress build-up in the coating microstructure, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 927-930.

‒ Gao, G.; Pershin, L.; Mostaghimi, J. In Optical emission spectroscopic diagnostics of atmospheric argon radio frequency inductively coupled plasma, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 1337-1346.

‒ Fard, M.; Ashgriz, N.; Mostaghimi, J.; Leveseque, D.; Morrison, S. In Film thickness and velocity distribution in a splash-plate atomizer: Comparison between simulations and experiments, Proceeding of the 9th international conference on liquid atomization and sprays systems, Sorrento, Italy, 2003.

‒ Dolatabadi, A.; Pershin, V.; Mostaghimi, J. In Modelling and design of an attachment to the HVOF gun, ITSC 2003: International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, 2003; pp 779-787.

‒ Dolatabadi, A.; Mosatghimi, J.; Pershin, V. In A new design for coating thin film alumina on stainless steel for biomedical applications, Proceedings International Conference on MEMS, NANO and Smart Systems, IEEE: 2003; pp 94-98.

‒ Colombo, V.; Gao, G.; Ghedini, E.; Mostaghimi, J. In Asymmetry effects in the diagnostics and simulation of RF inductively coupled plasma torch, Proceedings of the 16th International Symposium on Plasma Chemistry (ISPC-16), 2003.

‒ Shan, Y.; Mostaghimi, J. In Prediction of liquid spray evaporation in RF inductively coupled plasmas, APS Meeting Abstracts, 2002.

‒ Shahbazi, K.; Paraschivoiu, M.; Mostaghimi, J. In Volume Tracking on Triangular Meshes, ASME 2002 Joint US-European Fluids Engineering Division Conference, American Society of Mechanical Engineers: 2002; pp 743-749.

‒ Passandideh Fard, M. In Simulation of the liquid film atomization, Proceedings of the Ninth Asian Congress of Fluid Mechanics, 2002.

‒ Mehdizadeh, N.; Chandra, S.; Mostaghimi, J. In Effect of substrate temperature and roughness on coating formation, Proc. Int. Thermal Spray Conf., Essen 2002, DVS, Düsseldorf, Germany: 2002; pp 830-37.

‒ Ghafouri-Azar, R.; Shakeri, S.; Chandra, S.; Mostaghimi, J. In Numerical simulation of offset deposition for sequential tin droplets, Proceeding of International Thermal Spray Conference and Exposition, 2002; pp 4-6.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S. In A Three-Dimensional Numerical Study of Tin Droplets Landing Sequentially on a Solid Surface, ASME 2002 Joint US-European Fluids Engineering Division Conference, American Society of Mechanical Engineers: 2002; pp 503-510.

‒ Fard, M.; Ashriz, N.; Mostaghimi, J. In Modeling liquid film formation and breakup in an industrial spray nozzle, Proc. 15lh Ann. Conf. Liquid Atomization and Spray Systems, 2002; pp 41-45.

‒ Dolatabadi, A.; Pershin, V.; Mostaghimi, J. In Effect of Flow Regime on Particle Velocity in the High Velocity Oxy-Fuel (HVOF) Process, ITSC2002, ASM International: 2002; pp 918-925.

‒ Dolatabadi, A.; Mostaghimi, J.; Pershin, V. In Interaction of Shock and Expansion Wave With Solid Particles in Supersonic Flows, ASME 2002 Joint US-European Fluids Engineering Division Conference, American Society of Mechanical Engineers: 2002; pp 399-407.

‒ Pershin, V.; Passandideh Fard, M.; Chandra, S.; Mostaghimi, J. In Effect of substrate properties on the formation of plasma sprayed alumina splats, Proceedings of the International Thermal Spray Conference, 2001.

‒ Pershin, L.; Lufitha, M.; Mostaghimi, J.; Chandra, S. In Effect of substrate temperature on nickel coating adhesion, 15th Int. Symposium on Plasma Chemistry, 2001; pp 2633-37.

‒ Passandideh Fard, M.; Parizi, H.; Mostaghimi, J. In Computational modeling of the atomization of a liquid jet impinging on a solid plate, Proceedings of the 9th Annual Conference of the CFD Society of Canada, 2001.

‒ Pasandideh-Fard, M.; Mostaghimi, J.; Chandra, S. In 3D model of the impact and solidification of a droplet on a solid surface, 15th AIAA Computational Fluid Dynamics Conference, 2001; p 2567.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S. In A stochastic model of plasma sprayed coating formation, Proceedings of the 15th International Symposium on Plasma Chemistry, Orléans, France, 2001.

‒ Dolatabadi, A.; Mostaghimi, J.; Ivanovic, M. In Modeling All Speed Particle Laden Flows Using a Fully Eulerian Approach, Proceedings of the ninth Annual Conference of the CFD Society of Canada, 2001; pp 412-417.

‒ Pershin, V.; Thompson, I.; Chandra, S.; Mostaghimi, J. In Splashing of nickel droplets during plasma spraying, Proceedings of First International Thermal spray Conference, Montreal (8–11 May 2000), 2000; pp 721-723.

‒ Passandideh Fard, M.; Pershin, V.; Thomson, I.; Mostaghimi, J.; Chandra, S. In Modeling thermal spray coating formation, J. of the Canadian Ceramic Society, Conference issue for 98th Annual Canadian Ceramic Society, 2000.

‒ Passandideh Fard, M.; Chandra, S.; Mostaghimi, J. In Numerical simulation of thermal spray coating formation, Proceedings of International Thermal Spray Conference, 2000.

‒ Passandideh Fard, M.; Bussmann, M.; Chandra, S.; Mostaghimi, J. In Droplet impact on a tube: simulations and experiments, 8th International Conference on Liquid Atomization and Spray Systems, 2000.

‒ Passandideh Fard, M.; Bussmann, M.; Chandra, S.; Mostaghimi, J. In On a 3D computational model of free surface flows including internal obstacles, Proceedings of the 8th Annual Conference of the CFD Society of Canada, 2000.

‒ Dolatabadi, A.; Mostaghimi, J.; Ivanovic, M. In A Fully Eulerian Approach to Particle-Laden Compressible Flows, ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers: 2000; pp 225-230.

‒ Dolatabadi, A.; Mostaghimi, J.; Ivanovic, M. In Numerical modeling of particle laden flow in HVOF torch with gas shroud, Proceeding of the International Thermal Spray Conference, Montreal, Que., Canada, 2000; pp 105-113.

‒ Passandideh Fard, M.; Pershin, V.; Thomson, I.; Mostaghimi, J.; Chandra, S. In Splat morphology in thermal spray coatings: simulations and experiments, Abstract Proceedings of the 6th International Conference on Coatings for Aerospace and Automotive Industries, 1999.

‒ Passandideh Fard, M.; Mostaghimi, J.; Chandra, S. In 3D model of droplet impact and solidification: impact on a solidified splat, Proceedings of the 14th International Symposium on Plasma Chemistry, 1999.

‒ Pasandideh-Fard, M.; Mostaghimi, J.; Chandra, S. In Modeling sequential impact of two molten droplets on a solid surface, Proceeding of 12th Annual Conference on Liquid Atomization and Spray Systems, Indianapolis, Indiana, 1999; pp 265-269.

‒ Pasandideh-Fard, M.; Mostaghimi, J.; Chandra, S. In On a three dimensional model of free surface flows with heat transfer and solidification, Proceeding of the 3rd ASME/JSME Joint Fluids Engineering Conference, 1999; pp 18-23.

‒ Pasandideh-Fard, M.; Aziz, S.; Chandra, S.; Mostaghimi, J. In Surface cooling by an impinging water drop, 33rd National Heat Transfer Conference, Albuquerque, NM, 1999.

‒ Pershin, V. In A gas shroud nozzle for HVOF spray deposition, Proc. Int. Thermal Spray Conf., 1998; pp 1305-1308.

‒ Bussmann, M.; Aziz, S.; Mostaghimi, J.; Chandra, S. In Modelling the fingering of impacting droplets “, Proceedings of Canadian CFD conference, 1998; pp 43-48.

‒ Bussmann, M.; Aziz, S.; Chandra, S.; Mostaghimi, J. In 3D modelling of thermal spray droplet splashing, Thermal Spray: Meeting the Challenges of the 21st Century, ASM International, Materials Park, OH: 1998; pp 413-18.

‒ Sakuta, T. In Analysis of dynamic behavior of induction thermal plasma under pulse modulated condition, Proceedings of the 13^ Int. Symp. on Plasma Chemistry (Beijing, China), 1997, 1997; pp 263-268.

‒ Qiao, Y.; Chandra, S. In Experiments on adding a surfactant to water drops boiling on a hot surface, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, The Royal Society: 1997; pp 673-689.

‒ Paul, K. In An experimental and theoretical study of copper contaminated SF_6 plasmas by ICP technique, Proceedings of the 12^ Int. Conf. on Gas Discharges and Their Applications (Greifswald, Germany), 1997, 1997; pp 42-45.

‒ Passandideh Fard, M.; Bhola, R.; Chandra, S.; Mostaghimi, J. In Droplet impact and solidification: comparison of experimental and numerical results, ASME HTD 347-9, National Heat Transfer Conference, 1997.

‒ Passandideh Fard, M.; Mostaghimi, J. In Enthalpy method on modeling droplet impact and solidification in a plasma spray process, Abstract Book of the 46th Canadian Chemical Engineering Conference, 1996.

‒ Passandideh Fard, M.; Mostaghimi, J. In Droplet impact and solidification in a thermal spray process: droplet-substrate interactions, Proceedings of the 9th National Thermal Spray Conference, 1996.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J. In Water Droplet Impact Onto Various Surface Geometries-Experimental and Numerical Results, APS Division of Fluid Dynamics Meeting Abstracts, 1996.

‒ Passandideh Fard, M.; Qiao, Y.; Chandra, S.; Mostaghimi, J. In The effect of surface tension and contact angle on the spreading of a droplet impacting on a substrate, FED-Vol. 218, ASME Fluids Engineering Conference, 1995.

‒ Mostaghimi, J.; Passandideh Fard, M.; Jankovic, M. In Modeling of DC plasma spraying operation including particle impaction and solidification, Proceedings of the International Symposium on Heat and Mass Transfer under Plasma Conditions, 1995.

‒ Shen, X.; Kuhn, D.; Tran, H.; Mostaghimi, J. In Simulation of Flue Gas Flow in the Upper Furnace of a Recovery Boiler, ANNUAL MEETING-TECHNICAL SECTION CANADIAN PULP AND PAPER ASSOCIATION, CANADIAN PULP & PAPER ASSN-TECHNICAL SECTION: 1994; pp B165-B165.

‒ Passandideh Fard, M.; Mostaghimi, J. In Numerical simulation of the spreading and solidification of a droplet in plasma spray process, Proceedings of the 2nd Annual Conference of the CFD Society of Canada, 1994.

‒ Jankovic, M.; Mostaghimi, J.; Noga, J. In Mathematical modeling in thermal plasma spraying, Dev. Appl. Ceram. New Met. Alloys, Proc. Int. Symp., 1993; pp 447-58.

‒ Mostaghimi, J. In MATHEMATICAL MODELS FOR HIGH FREQUENCY PLASMA TORCHES, Proceedings of the International Conference on Engineering Applications of Mechanics: Heat and Mass Transfer, Sharif University of Technology: 1992; p 474.

‒ PROULX, P.; Mostaghimi, J.; Boulos, M. In COLLOQUE DE PHYSIQUE Collogue C5, supplement au n* 18. Tome 51, 15 septembre 1990 C5-263, European Congress on Thermal Plasma Processes and Materials Behaviour at High Temperature: Odeillo, Font-Romeu, September 12-14, 1990, Editions de physique: 1990; p 263.

‒ Njah, Z.; Mostaghimi, J.; Boulos, M. In Mixing of a cold jet with a transverse plasma flow, Plasma Science, 1990. IEEE Conference Record-Abstracts., 1990 IEEE International Conference on, IEEE: 1990; pp 199-200.

‒ Prouix, P.; Mostaghimi, J.; Boulos, M. In Radiative effects in induction plasma modeling, Proceedings of the 1989 IEEE international conference on plasma science (Abstracts), 1989.

‒ Montazeri, H.; Pourmousa, A.; Mostaghimi, J. In Sharp Implementation of Surface Tension Force Using Level-Set Function in Structured/Unstructured Meshes, 38th Fluid Dynamics Conference and Exhibit, p 3844.