‒ Dalir, E.; Dolatabadi, A.; Mostaghimi, J., Investigating the in-flight droplets' atomization in suspension plasma-sprayed coating. International Journal of Heat and Mass Transfer 2022, 182, 121969.

‒ Yvenou, É.; Bily, A.; Ettouil, F. B.; Dolatabadi, A.; Davis, B.; Guay, D.; Moreau, C.; Roué, L., TiB2 Deposited on Graphite by Suspension Plasma Spray as Al Wettable Cathode. Journal of Thermal Spray Technology 2021, 1-9.

‒ Yeganehdoust, F.; Attarzadeh, R.; Dolatabadi, A.; Karimfazli, I., A comparison of bioinspired slippery and superhydrophobic surfaces: Micro-droplet impact. Physics of Fluids 2021, 33 (2), 022105.

‒ Yeganehdoust, F.; Amer, A.; Sharifi, N.; Karimfazli, I.; Dolatabadi, A., Droplet Mobility on Slippery Lubricant Impregnated and Superhydrophobic Surfaces under the Effect of Air Shear Flow. Langmuir 2021.

‒ Rahimi, A.; Hojjati, M.; Dolatabadi, A.; Moreau, C., Thermal Spray Coating on Polymeric Composite for De-Icing and Anti-Icing Applications. Journal of Manufacturing Science and Engineering 2021, 143 (10), 101008.

‒ Przybyszewski, B.; Kozera, R.; Krawczyk, Z. D.; Boczkowska, A.; Dolatabadi, A.; Amer, A.; Sztorch, B.; Przekop, R. E., A Wind Tunnel Experimental Study of Icing on NACA0012 Aircraft Airfoil with Silicon Compounds Modified Polyurethane Coatings. Materials 2021, 14 (19), 5687.

‒ Nasiri, M.; Amini, G.; Moreau, C.; Dolatabadi, A., Hollow droplet impact on a solid surface. International Journal of Multiphase Flow 2021, 143, 103740.

‒ Mokhtarpour, K.; Jadidi, M.; Dolatabadi, A., Dynamic Mode Decomposition of Elliptical Liquid Jets in Crossflow. Transactions of the Canadian Society for Mechanical Engineering 2021,  (ja).

‒ Mokhtarpour, K.; Jadidi, M.; Dolatabadi, A., Modal Analysis-Based Classification of Liquid Jets in Crossflow. Atomization and Sprays 2021, 31 (7).

‒ Mohammadkhani, S.; Jalilvand, V.; Davis, B.; Gauthier, G.; Dolatabadi, A.; Moreau, C.; Roué, L.; Guay, D., High-temperature behaviour of HVOF (Co, Ni) O coated Cu-Ni-Fe anodes. Corrosion Science 2021, 189, 109563.

‒ Khamsepour, P.; Moreau, C.; Dolatabadi, A., Numerical Simulation of the Effect of Particle and Substrate Preheating on Porosity Level and Residual Stress of As-sprayed Ti6Al4V Components. Journal of Thermal Spray Technology 2021, 1-14.

‒ Garmeh, S.; Dolatabadi, A.; Karimfazli, I., A novel suspension transport method: Viscoplastic lubrication of high-density fluids. Journal of Non-Newtonian Fluid Mechanics 2021, 287, 104449.

‒ Forati, T.; Sharifi, N.; Kaydanova, T.; Ettouil, F. B.; Moghimian, N.; Pugh, M.; Dolatabadi, A.; Moreau, C., Wetting and corrosion characteristics of thermally sprayed copper-graphene nanoplatelet coatings for enhanced dropwise condensation application. Carbon Trends 2021, 3, 100018.

‒ Farzad, M.; Fortin, G.; Dolatabadi, A., Quantitative analysis of rivulet/ice formation on a heated airfoil by Color-Coded Point Projection method. Cold Regions Science and Technology 2021, 188, 103298.

‒ Dehaghani, S. T.; Dolatabadi, A.; McDonald, A., Thermally sprayed metal matrix composite coatings as heating systems. Applied Thermal Engineering 2021, 196, 117321.

‒ Yeganehdoust, F.; Attarzadeh, R.; Karimfazli, I.; Dolatabadi, A., A numerical analysis of air entrapment during droplet impact on an immiscible liquid film. International Journal of Multiphase Flow 2020, 124, 103175.

‒ Shetabivash, H.; Dolatabadi, A.; Paraschivoiu, M., A multiple level-set approach for modelling containerless freezing process. Journal of Computational Physics 2020, 415, 109527.

‒ Mohammadkhani, S.; Jalilvand, V.; Davis, B.; Ettouil, F. B.; Dolatabadi, A.; Roue, L.; Moreau, C.; Guay, D., Suspension plasma spray deposition of CoxNi1-xO coatings. Surface and Coatings Technology 2020, 399, 126168.

‒ Marzbali, M.; Dolatabadi, A., Flow characterization of a water drop impinged onto a rigid surface at a high speed and normal angle in the presence of stagnant air at ambient conditions. J. Fluid Flow, Heat Mass Transfer (published online 2020). https://doi. org/10.11159/jffhmt 2020, 9.

‒ Marzbali, M.; Dolatabadi, A., High-speed droplet impingement on dry and wetted substrates. Physics of Fluids 2020, 32 (11), 112101.

‒ Lengaigne, J.; Bousser, E.; Brown, S.; Xing, P.; Turcot, F.; Dolatabadi, A.; Martinu, L.; Klemberg-Sapieha, J. E., In situ ice growth kinetics on water-repellent coatings under atmospheric icing conditions. Surface and Coatings Technology 2020, 399, 126136.

‒ Laroche, A.; Grasso, M. J.; Dolatabadi, A.; Bonaccurso, E., Tensile and Shear Test Methods for Quantifying the Ice Adhesion Strength to a Surface. Ice Adhesion: Mechanism, Measurement and Mitigation 2020, 237-284.

‒ Gomaa, H.; Tembely, M.; Esmail, N.; Dolatabadi, A., Bouncing of cloud-sized microdroplets on superhydrophobic surfaces. Physics of Fluids 2020, 32 (12), 122118.

‒ Garmeh, S.; Jadidi, M.; Dolatabadi, A., Three-dimensional modeling of cold spray for additive manufacturing. Journal of Thermal Spray Technology 2020, 29 (1), 38-50.

‒ Dalir, E.; Dolatabadi, A.; Mostaghimi, J., Modeling the effect of droplet shape and solid concentration on the suspension plasma spraying. International Journal of Heat and Mass Transfer 2020, 161, 120317.

‒ Brown, S.; Lengaigne, J.; Sharifi, N.; Pugh, M.; Moreau, C.; Dolatabadi, A.; Martinu, L.; Klemberg-Sapieha, J. E., Durability of superhydrophobic duplex coating systems for aerospace applications. Surface and Coatings Technology 2020, 401, 126249.

‒ Yeganeh, A. Z.; Jadidi, M.; Moreau, C.; Dolatabadi, A., Numerical modeling of aerosol deposition process. Surface and Coatings Technology 2019, 370, 269-287.

‒ Tembely, M.; Vadillo, D.; Soucemarianadin, A.; Dolatabadi, A., Numerical simulations of polymer solution droplet impact on surfaces of different wettabilities. Processes 2019, 7 (11), 798.

‒ Tembely, M.; Dolatabadi, A., A comprehensive model for predicting droplet freezing features on a cold substrate. Journal of Fluid Mechanics 2019, 859, 566-585.

‒ Tarasi, F.; Alebrahim, E.; Dolatabadi, A.; Moreau, C., A comparative study of YSZ suspensions and coatings. Coatings 2019, 9 (3), 188.

‒ Sharifi, N.; Dolatabadi, A.; Pugh, M.; Moreau, C., Anti-icing performance and durability of suspension plasma sprayed TiO2 coatings. Cold Regions Science and Technology 2019, 159, 1-12.

‒ Saleh, A.; Amini, G.; Dolatabadi, A., Measurement of dynamic surface tension of suspension sprays based on oscillating jet technique. Atomization and Sprays 2019, 29 (1).

‒ Mohammadkhani, S.; Schaal, E.; Dolatabadi, A.; Moreau, C.; Davis, B.; Guay, D.; Roué, L., Synthesis and thermal stability of (Co, Ni) O solid solutions. Journal of the American Ceramic Society 2019, 102 (9), 5063-5070.

‒ Moghtadernejad, S.; Jadidi, M.; Ahmmed, K. T.; Lee, C.; Dolatabadi, A.; Kietzig, A.-M., Experimental study of droplet shedding on laser-patterned substrates. Physics of Fluids 2019, 31 (12), 122107.

‒ Lengaigne, J.; Bousser, E.; Brown, S.; Batory, D.; Dolatabadi, A.; Martinu, L.; Klemberg-Sapieha, J. E., Impact dynamics of supercooled microdroplets on water-repellent coatings. Thin Solid Films 2019, 688, 137309.

‒ Jadidi, M.; Sreekumar, V.; Dolatabadi, A., Breakup of elliptical liquid jets in gaseous crossflows at low Weber numbers. Journal of Visualization 2019, 22 (2), 259-271.

‒ Dalir, E.; Dolatabadi, A.; Mostaghimi, J., Modeling of suspension plasma spraying process including arc movement inside the torch. Journal of Thermal Spray Technology 2019, 28 (6), 1105-1125.

‒ Attarzadeh, R.; Dolatabadi, A., Icephobic performance of superhydrophobic coatings: A numerical analysis. International Journal of Heat and Mass Transfer 2019, 136, 1327-1337.

‒ Alebrahim, E.; Tarasi, F.; Rahaman, M. S.; Dolatabadi, A.; Moreau, C., Fabrication of titanium dioxide filtration membrane using suspension plasma spray process. Surface and Coatings Technology 2019, 378, 124927.

‒ Alavi, S.; Mostaghimi, J., A Novel ICP Torch with Conical Geometry. Plasma Chemistry and Plasma Processing 2019, 1-18.

‒ Akbarnozari, A.; Amiri, S.; Dolatabadi, A.; Moreau, C., Analysis of scattering light from in-flight particles in suspension plasma spray for size measurement. Journal of Thermal Spray Technology 2019, 28 (4), 678-689.

‒ Aghasibeig, M.; Tarasi, F.; Lima, R. S.; Dolatabadi, A.; Moreau, C., A review on suspension thermal spray patented technology evolution. Journal of Thermal Spray Technology 2019, 28 (7), 1579-1605.

‒ Yi, P.; Mostaghimi, J.; Pershin, L.; Xu, P.; Zhan, X.; Jia, D.; Yi, H.; Liu, Y., Effects of laser surface remelting on the molten salt corrosion resistance of yttria-stabilized zirconia coatings. Ceramics International 2018, 44 (18), 22645-22655.

‒ Xu, P.; Pershin, L.; Mostaghimi, J.; Coyle, T. W., Efficient one-step fabrication of ceramic superhydrophobic coatings by solution precursor plasma spray. Materials Letters 2018, 211, 24-27.

‒ Xu, P.; Coyle, T. W.; Pershin, L.; Mostaghimi, J., Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process. Materials & Design 2018, 160, 974-984.

‒ Xu, P.; Coyle, T. W.; Pershin, L.; Mostaghimi, J., Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior. Journal of colloid and interface science 2018, 523, 35-44.

‒ Xin, Q.; Su, X.; Alavi, S.; Wang, B.; Mostaghimi, J., Effects of conical nozzle and its geometry on properties of an inductively coupled plasma jet used for optical fabrication. Applied Thermal Engineering 2018, 128, 785-794.

‒ Tembely, M.; Attarzadeh, R.; Dolatabadi, A., On the numerical modeling of supercooled micro-droplet impact and freezing on superhydrophobic surfaces. International Journal of Heat and Mass Transfer 2018, 127, 193-202.

‒ Tembely, M., On the Numerical Modeling of FENE-CR Viscoelastic Droplet Impact Dynamics by the Volume Of Fluid Method. 2018.

‒ Sivakumar, S.; Shanmugavelayutham, G.; Yugeswaran, S.; Mostaghimi, J., Influence of water vapour on structural and thermal conductivity of post-heat treated plasma sprayed LZ and YSZ coatings. Journal of Alloys and Compounds 2018, 740, 212-221.

‒ Saleh, A.; Amini, G.; Dolatabadi, A., Penetration of aerated suspension spray in a gaseous crossflow. Atomization and Sprays 2018, 28 (2).

‒ Mousavi, M.; Dolatabadi, A., Numerical study of the effect of gas-to-liquid ratio on the internal and external flows of effervescent atomizers. Transactions of the Canadian Society for Mechanical Engineering 2018, 42 (4), 444-456.

‒ Mostaghimi, J.; Chandra, S., Droplet Impact and Solidification in Plasma Spraying. Handbook of Thermal Science and Engineering 2018, 2967-3008.

‒ Jafari, M.; Mostaghimi, J.; Monajatizadeh, H.; Rafiei, M., Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method. Surface Engineering 2018, 34 (3), 220-225.

‒ Jadidi, M.; Yeganeh, A. Z.; Dolatabadi, A., Numerical study of suspension HVOF spray and particle behavior near flat and cylindrical substrates. Journal of Thermal Spray Technology 2018, 27 (1), 59-72.

‒ Jadidi, M.; Vardelle, A.; Dolatabadi, A.; Moreau, C., Heat transfer in suspension plasma spraying. Handbook of Thermal Science and Engineering; Springer International Publishing: Cham, Switzerland 2018.

‒ Jadidi, M.; Dolatabadi, A., On the trajectory of nonturbulent liquid jets in subsonic crossflows at different density ratios. Theoretical and Applied Mechanics Letters 2018, 8 (4), 277-283.

‒ Garmeh, S.; Dolatabadi, A.; Karimfazli, I., Using Visco-Plastic Lubrication for Suspension Transportation. 2018.

‒ Dalir, E.; Moreau, C.; Dolatabadi, A., Three-dimensional modeling of suspension plasma spraying with arc voltage fluctuations. Journal of Thermal Spray Technology 2018, 27 (8), 1465-1490.

‒ Xu, P.; Mostaghimi, J.; Coyle, T.; Pershin, L., Suspension Plasma Spray of Yttria Stabilized Zirconia Coatings. Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development 2017, 263, 451.

‒ Vardelle, A.; Moreau, C.; Akedo, J.; Ashrafizadeh, H.; Berndt, C. C.; Berghaus, J. O.; Boulos, M.; Brogan, J.; Bourtsalas, A. C.; Dolatabadi, A., The 2016 Thermal Spray Roadmap (vol 25, pg 1376, 2016). JOURNAL OF THERMAL SPRAY TECHNOLOGY 2017, 26 (5), 985-986.

‒ Vardelle, A.; Moreau, C.; Akedo, J.; Ashrafizadeh, H.; Berndt, C. C.; Berghaus, J. O.; Boulos, M.; Brogan, J.; Bourtsalas, A. C.; Dolatabadi, A., Erratum to: The 2016 Thermal Spray Roadmap (Journal of Thermal Spray Technology,(2016), 25, 8,(1376-1440), 10.1007/s11666-016-0473-x). Journal of Thermal Spray Technology 2017, 26 (5), 985-986.

‒ Sivakumar, S.; Praveen, K.; Shanmugavelayutham, G.; Yugeswaran, S.; Mostaghimi, J., Thermo-physical behavior of atmospheric plasma sprayed high porosity lanthanum zirconate coatings. Surface and Coatings Technology 2017, 326, 173-182.

‒ Shetabivash, H.; Dolatabadi, A., Numerical investigation of air mediated droplet bouncing on flat surfaces. AIP Advances 2017, 7 (9), 095003.

‒ Sharifi, N.; Ettouil, F. B.; Moreau, C.; Dolatabadi, A.; Pugh, M., Engineering surface texture and hierarchical morphology of suspension plasma sprayed TiO2 coatings to control wetting behavior and superhydrophobic properties. Surface and Coatings Technology 2017, 329, 139-148.

‒ Shafaghi, R.; Mostaghimi, J.; Pershin, V.; Ringuette, M., Sporicidal efficacy of thermal-sprayed copper alloy coating. Canadian journal of microbiology 2017, 63 (5), 384-391.

‒ Safaei, H.; Emami, M. D.; Jazi, H. S.; Mostaghimi, J., Application of Compressible Volume of Fluid Model in Simulating the Impact and Solidification of Hollow Spherical ZrO2 Droplet on a Surface. Journal of Thermal Spray Technology 2017, 26 (8), 1959-1981.

‒ Naterer, G.; Suppiah, S.; Rosen, M.; Gabriel, K.; Dincer, I.; Jianu, O.; Wang, Z.; Easton, E.; Ikeda, B.; Rizvi, G., Advances in unit operations and materials for the CuCl cycle of hydrogen production. International Journal of Hydrogen Energy 2017, 42 (24), 15708-15723.

‒ Mostaghimi, J.; Pershin, L.; Yugeswaran, S., Heat Transfer in DC AND RF Plasma Torches. Handbook of Thermal Science and Engineering 2017, 1-76.

‒ Mohammadi, M.; Tembely, M.; Dolatabadi, A., Predictive model of supercooled water droplet pinning/repulsion impacting a superhydrophobic surface: the role of the gas–liquid interface temperature. Langmuir 2017, 33 (8), 1816-1825.

‒ Mohammadi, M.; Tembely, M.; Dolatabadi, A., Supercooled water droplet impacting superhydrophobic surfaces in the presence of cold air flow. Applied Sciences 2017, 7 (2), 130.

‒ Jamaloei, A. D.; Salimijazi, H. R.; Edris, H.; Mostaghimi, J., Study of TLP bonding of Ti-6Al-4V alloy produced by vacuum plasma spray forming and forging. Materials & Design 2017, 121, 355-366.

‒ Jadidi, M.; Moghtadernejad, S.; Dolatabadi, A., Numerical simulation of primary breakup of round nonturbulent liquid jets in shear-laden gaseous crossflow. Atomization and Sprays 2017, 27 (3).

‒ Hafeez, P.; Chandra, S.; Mostaghimi, J., Heat Transfer During High Temperature Gas Flow Through Metal Foam Heat Exchangers. Journal of Heat Transfer 2017, 139 (12), 121801.

‒ Farrokhpanah, A.; Mostaghimi, J.; Bussmann, M., Free-Surface Enthalpy Method for Transient Convection/Diffusion Phase Change. arXiv preprint arXiv:1701.00463 2017.

‒ Farrokhpanah, A.; Coyle, T. W.; Mostaghimi, J., Numerical study of suspension plasma spraying. Journal of Thermal Spray Technology 2017, 26 (1-2), 12-36.

‒ Farrokhpanah, A.; Bussmann, M.; Mostaghimi, J., New smoothed particle hydrodynamics (SPH) formulation for modeling heat conduction with solidification and melting. Numerical Heat Transfer, Part B: Fundamentals 2017, 71 (4), 299-312.

‒ De Pauw, D.; Dolatabadi, A., Effect of superhydrophobic coating on the anti-icing and deicing of an airfoil. Journal of Aircraft 2017, 54 (2), 490-499.

‒ Dalili, A.; Esmaeelpanah, J.; Chandra, S.; Mostaghimi, J., Coalescence and agglomeration of droplets sprayed on a substrate. Atomization and Sprays 2017, 27 (1).

‒ Attarzadeh, R.; Dolatabadi, A., Coalescence-induced jumping of micro-droplets on heterogeneous superhydrophobic surfaces. Physics of Fluids 2017, 29 (1), 012104.

‒ Ataie, A.; Mostaghimi, J.; Pershin, L.; Xu, P., Fabrication of nanostructured cobalt ferrite coatings using suspension plasma spraying (SPS) technique. Surface and Coatings Technology 2017, 328, 451-461.

‒ Arif, A.; Al-Athel, K.; Mostaghimi, J., 3.4 Residual Stresses in Thermal Spray Coating. 2017.

‒ Alavi, S.; Khayamian, T.; Mostaghimi, J., Conical Torch: The Next-Generation Inductively Coupled Plasma Source for Spectrochemical Analysis. Analytical chemistry 2017, 90 (5), 3036-3044.

‒ Al-Athel, K. S.; Aly, S. P.; Arif, A. F. M.; Mostaghimi, J., 3D modeling and analysis of the thermo-mechanical behavior of metal foam heat sinks. International Journal of Thermal Sciences 2017, 116, 199-213.

‒ Abubakar, A. A.; Arif, A. F. M.; Al-Athel, K. S.; Akhtar, S. S.; Mostaghimi, J., Modeling residual stress development in thermal spray coatings: current status and way forward. Journal of Thermal Spray Technology 2017, 26 (6), 1115-1145.

‒ Vardelle, A.; Moreau, C.; Akedo, J.; Ashrafizadeh, H.; Berndt, C. C.; Berghaus, J. O.; Boulos, M.; Brogan, J.; Bourtsalas, A. C.; Dolatabadi, A., The 2016 thermal spray roadmap. Journal of Thermal Spray Technology 2016, 25 (8), 1376-1440.

‒ Tarasi, F.; Mahdipoor, M.; Dolatabadi, A.; Medraj, M.; Moreau, C., HVOF and HVAF coatings of agglomerated tungsten carbide-cobalt powders for water droplet erosion application. Journal of Thermal Spray Technology 2016, 25 (8), 1711-1723.

‒ Sharifi, N.; Pugh, M.; Moreau, C.; Dolatabadi, A., Developing hydrophobic and superhydrophobic TiO2 coatings by plasma spraying. Surface and Coatings Technology 2016, 289, 29-36.

‒ Saranjam, N.; Chandra, S.; Mostaghimi, J.; Fan, H.; Simmer, J., Orange peel formation due to surface tension-driven flows within drying paint films. Journal of Coatings Technology and Research 2016, 13 (3), 413-426.

‒ Salavati, S.; Coyle, T. W.; Mostaghimi, J., The effect of heat treatment on mechanical properties of thermally sprayed sandwich structure beams. Journal of Thermal Spray Technology 2016, 25 (1-2), 105-112.

‒ Salavati, S.; Coyle, T.; Mostaghimi, J., Twin wire arc spray process modification for production of porous metallic coatings. Surface and Coatings Technology 2016, 286, 16-24.

‒ Pourang, K.; Moreau, C.; Dolatabadi, A., Effect of substrate and its shape on in-flight particle characteristics in suspension plasma spraying. Journal of Thermal Spray Technology 2016, 25 (1-2), 44-54.

‒ Nejad, M.; Shafaghi, R.; Pershin, L.; Mostaghimi, J.; Cooper, P., Thermal spray coating: A new way of protecting wood. BioResources 2016, 12 (1), 143-156.

‒ Moghtadernejad, S.; Jadidi, M.; Esmail, N.; Dolatabadi, A., Shear-driven droplet coalescence and rivulet formation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2016, 230 (5), 793-803.

‒ Lee, J. B.; Derome, D.; Dolatabadi, A.; Carmeliet, J., Energy budget of liquid drop impact at maximum spreading: Numerical simulations and experiments. Langmuir 2016, 32 (5), 1279-1288.

‒ Kihm, K. D.; Choi, C. K.; Pratt, D. M., Heat Transfer Gallery. Journal of Heat Transfer 2016, 138 (008), 80301.

‒ Jadidi, M.; Moghtadernejad, S.; Dolatabadi, A., Penetration and breakup of liquid jet in transverse free air jet with application in suspension-solution thermal sprays. Materials & Design 2016, 110, 425-435.

‒ Jadidi, M.; Moghtadernejad, S.; Dolatabadi, A., Numerical modeling of suspension HVOF spray. Journal of Thermal Spray Technology 2016, 25 (3), 451-464.

‒ Hafeez, P.; Yugeswaran, S.; Chandra, S.; Mostaghimi, J.; Coyle, T., Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams. Journal of Thermal Spray Technology 2016, 25 (5), 1056-1067.

‒ Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H. C.; Simmer, J. C., Bubble entrapment and escape from sprayed paint films. Progress in Organic Coatings 2016, 97, 153-165.

‒ Cai, Y.; Coyle, T. W.; Azimi, G.; Mostaghimi, J., Superhydrophobic ceramic coatings by solution precursor plasma spray. Scientific reports 2016, 6, 24670.

‒ Cai, Y.; Azimi, G.; Coyle, T. W.; Mostaghimi, J., Solution Precursor Plasma Sprayed Superhydrophobic Surface. Additive Manufacturing and Strategic Technologies in Advanced Ceramics 2016, 258, 141.

‒ Attarzadeh, R.; Dolatabadi, A., Numerical study of the effect of surface wettability on performance of the spray cooling process. International Journal of Computational Methods and Experimental Measurements 2016, 4 (4), 615-624.

‒ Aly, S.; Arif, A.; Al-Athel, K.; Mostaghimi, J.; Zubair, S., Performance of open pore metal foam heat sinks fabricated with thermally sprayed interface. Applied Thermal Engineering 2016, 105, 411-424.

‒ Aghasibeig, M.; Moreau, C.; Dolatabadi, A.; Wuthrich, R., Engineered Three-Dimensional Electrodes by HVOF Process for Hydrogen Production. Journal of Thermal Spray Technology 2016, 25 (8), 1561-1569.

‒ Aghasibeig, M.; Moreau, C.; Dolatabadi, A.; Wuthrich, R., Fabrication of nickel electrode coatings by combination of atmospheric and suspension plasma spray processes. Surface and Coatings Technology 2016, 285, 68-76.

‒ Aghasibeig, M.; Monajatizadeh, H.; Bocher, P.; Dolatabadi, A.; Wuthrich, R.; Moreau, C., Cold spray as a novel method for development of nickel electrode coatings for hydrogen production. International Journal of Hydrogen Energy 2016, 41 (1), 227-238.

‒ Aghasibeig, M.; Dolatabadi, A.; Wuthrich, R.; Moreau, C., Three-dimensional electrode coatings for hydrogen production manufactured by combined atmospheric and suspension plasma spray. Surface and Coatings Technology 2016, 291, 348-355.

‒ Agarwal, A.; Bolelli, G.; Fauchais, P.; Fukumoto, M.; Joshi, S.; Khor, M.; Lau, Y.-C.; Lee, C.; Li, H.; Lima, R. S., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2015. Journal of Thermal Spray Technology 2016, 25 (4), 615.

‒ Xu, G.; Zhou, J.; Geng, H.; Lu, M.; Yang, L.; Yu, L., Research on the static and dynamic characteristics of misaligned journal bearing considering the turbulent and thermohydrodynamic effects. Journal of Tribology 2015, 137 (2), 024504.

‒ Salavati, S.; Pershin, L.; Coyle, T.; Mostaghimi, J., Effect of Porosity Content of Arc-Sprayed Alloy 625 Skins on the Flexural Behavior of Nickel Foam Core Sandwich Structures. Journal of Thermal Spray Technology 2015, 24 (1-2), 215-221.

‒ Salavati, S.; Coyle, T.; Mostaghimi, J., Optimization of grit-blasting process parameters for production of dense coatings on open pores metallic foam substrates using statistical methods. Journal of Thermal Spray Technology 2015, 24 (7), 1246-1255.

‒ Mostaghimi, J.; Boulos, M. I., Thermal plasma sources: how well are they adopted to process needs? Plasma Chemistry and Plasma Processing 2015, 35 (3), 421-436.

‒ Moghtadernejad, S.; Tembely, M.; Jadidi, M.; Esmail, N.; Dolatabadi, A., Shear driven droplet shedding and coalescence on a superhydrophobic surface. Physics of Fluids 2015, 27 (3), 032106.

‒ Moghtadernejad, S.; Jadidi, M.; Tembely, M.; Esmail, N.; Dolatabadi, A., Concurrent droplet coalescence and solidification on surfaces with various wettabilities. Journal of Fluids Engineering 2015, 137 (7).

‒ Moghtadernejad, S.; Jadidi, M.; Dolatabadi, A.; Esmail, N., SPH simulation of rivulet dynamics on surfaces with various wettabilities. SAE International Journal of Aerospace 2015, 8 (2015-01-9005), 160-173.

‒ Mahdipoor, M.; Tarasi, F.; Moreau, C.; Dolatabadi, A.; Medraj, M., HVOF sprayed coatings of nano-agglomerated tungsten-carbide/cobalt powders for water droplet erosion application. Wear 2015, 330, 338-347.

‒ Kazemipour, M.; Salimijazi, H.; Saidi, A.; Saatchi, A.; Mostaghimi, J.; Pershin, L., The electrochemical hydrogen storage properties of Ti0. 72Zr0. 28Mn1. 6V0. 4 alloy synthesized by vacuum plasma spraying and vacuum copper boat induction melting: A comparative study. International Journal of Hydrogen Energy 2015, 40 (45), 15569-15577.

‒ Jadidi, M.; Mousavi, M.; Moghtadernejad, S.; Dolatabadi, A., A three-dimensional analysis of the suspension plasma spray impinging on a flat substrate. Journal of Thermal Spray Technology 2015, 24 (1-2), 11-23.

‒ Jadidi, M.; Moghtadernejad, S.; Dolatabadi, A., A comprehensive review on fluid dynamics and transport of suspension/liquid droplets and particles in high-velocity oxygen-fuel (HVOF) thermal spray. Coatings 2015, 5 (4), 576-645.

‒ Farrokhpanah, A.; Samareh, B.; Mostaghimi, J., Applying contact angle to a two-dimensional multiphase smoothed particle hydrodynamics model. Journal of Fluids Engineering 2015, 137 (4), 041303.

‒ Agarwal, A.; Ahmed, R.; Berndt, C. C.; Hyland, M. M.; Lau, Y.-C.; Lima, R. S.; Mauer, G.; McDonald, A.; Toma, F.-L.; Vardelle, A., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2014. Journal of Thermal Spray Technology 2015, 24 (4), 587.

‒ Adán, C.; Marugán, J.; van Grieken, R.; Chien, K.; Pershin, L.; Coyle, T.; Mostaghimi, J., Effect of Liquid Feed-Stock Composition on the Morphology of Titanium Dioxide Films Deposited by Thermal Plasma Spray. Journal of nanoscience and nanotechnology 2015, 15 (9), 6651-6662.

‒ Abubakar, A. A.; Akhtar, S. S.; Arif, A. F. M.; Mostaghimi, J., The effect of porosity on the hot corrosion failure of thermal barrier coatings. Modelling and Simulation in Materials Science and Engineering 2015, 23 (7), 075001.

‒ Tembely, M.; Vadillo, D.; Soucemarianadin, A.; Dolatabadi, A., On the modeling of viscoelastic droplet impact dynamics. 2014.

‒ Shan, Y.; Shen, C.; Jia, L.; Mostaghimi, J., Modeling of Two-Phase Flow and Heat Transfer in Low-Temperature Oxygen-Fuel Spray Process. Journal of Thermal Spray Technology 2014, 23 (1-2), 14-20.

‒ Samareh, B.; Mostaghimi, J.; Moreau, C., Thermocapillary migration of a deformable droplet. International Journal of Heat and Mass Transfer 2014, 73, 616-626.

‒ Salimijazi, H.; Mousavi, Z.; Golozar, M.; Mostaghimi, J.; Coyle, T., Kinetic Study of the Solid-State Transformation of Vacuum-Plasma-Sprayed Ti-6Al-4V Alloy. Journal of Thermal Spray Technology 2014, 23 (1-2), 31-39.

‒ Rezaey, R.; Salavati, S.; Pershin, L.; Coyle, T.; Chandra, S.; Mostaghimi, J., Erratum to: Fabrication of Wire Mesh Heat Exchangers for Waste Heat Recovery Using Wire-Arc Spraying. Journal of Thermal Spray Technology 2014, 23 (4), 755.

‒ Rezaey, R.; Salavati, S.; Pershin, L.; Coyle, T.; Chandra, S.; Mostaghimi, J., Fabrication of wire mesh heat exchangers for waste heat recovery using wire-arc spraying. Journal of thermal spray technology 2014, 23 (4), 609-615.

‒ Jabbari, F.; Jadidi, M.; Wuthrich, R.; Dolatabadi, A., A numerical study of suspension injection in plasma-spraying process. Journal of Thermal Spray Technology 2014, 23 (1-2), 3-13.

‒ Farrokhpanah, A.; Montazeri, H.; Mostaghimi, J., Parallel Finite Volume Algorithm on Graphic Processing Units (GPU). 2014.

‒ Dalili, A.; Chandra, S.; Mostaghimi, J.; Fan, H. C.; Simmer, J. C., Formation of liquid sheets by deposition of droplets on a surface. Journal of colloid and interface science 2014, 418, 292-299.

‒ Amini, G.; Lv, Y.; Dolatabadi, A.; Ihme, M., Instability of elliptic liquid jets: Temporal linear stability theory and experimental analysis. Physics of Fluids 2014, 26 (11), 114105.

‒ Aghasibeig, M.; Mousavi, M.; Ettouill, F. B.; Moreau, C.; Wuthrich, R.; Dolatabadi, A., Electrocatalytically active nickel-based electrode coatings formed by atmospheric and suspension plasma spraying. Journal of thermal spray technology 2014, 23 (1-2), 220-226.

‒ Agarwal, A.; Hyland, M.; Katanoda, H.; Khor, K. A.; Kuroda, S.; Lau, Y.-C.; Lee, C.; Li, C.-J.; Lima, R. S.; Marple, B. R., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2013. Journal of Thermal Spray Technology 2014, 23 (4), 567.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C., Enhancement of amorphous phase formation in alumina–YSZ coatings deposited by suspension plasma spray process. Surface and Coatings Technology 2013, 220, 191-198.

‒ Sharifahmadian, O.; Salimijazi, H.; Fathi, M.; Mostaghimi, J.; Pershin, L., Study of the antibacterial behavior of wire arc sprayed copper coatings. Journal of thermal spray technology 2013, 22 (2-3), 371-379.

‒ Sharifahmadian, O.; Salimijazi, H.; Fathi, M.; Mostaghimi, J.; Pershin, L., Relationship between surface properties and antibacterial behavior of wire arc spray copper coatings. Surface and Coatings Technology 2013, 233, 74-79.

‒ Shahverdi, A.; Soucy, G.; Simard, B.; Mostaghimi, J., Effect of ammonia gas addition to the synthesis environment of single-walled carbon nanotubes on their surface chemistry. Chemical engineering journal 2013, 230, 80-92.

‒ Pershin, L.; Mitrasinovic, A.; Mostaghimi, J., Treatment of refractory powders by a novel, high enthalpy dc plasma. Journal of Physics D: Applied Physics 2013, 46 (22), 224019.

‒ Naterer, G. F.; Suppiah, S.; Stolberg, L.; Lewis, M.; Wang, Z.; Dincer, I.; Rosen, M.; Gabriel, K.; Secnik, E.; Easton, E., Progress of international hydrogen production network for the thermochemical Cu–Cl cycle. International journal of hydrogen energy 2013, 38 (2), 740-759.

‒ Murphy, A. B.; Colombo, V.; Mostaghimi, J., Arc welding, plasma cutting and plasma spraying. J. Phys. D: Appl. Phys 2013, 46 (220301), 220301.

‒ Mohammadi, M.; Moghtadernejad, S.; Tembely, M.; Dolatabadi, A. Effect of Stagnation Flow on an Impacting Water Droplet on a Superhydrophobic Surface; SAE Technical Paper: 2013.

‒ Moghtadernejad, S.; Mohammadi, M.; Jadidi, M.; Tembely, M.; Dolatabadi, A., Shear driven droplet shedding on surfaces with various wettabilities. SAE International Journal of Aerospace 2013, 6 (2013-01-2176), 459-464.

‒ Lee, M. W.; Kim, N. Y.; Chandra, S.; Yoon, S. S., Coalescence of sessile droplets of varying viscosities for line printing. International Journal of Multiphase Flow 2013, 56, 138-148.

‒ Kim, D.-Y.; Park, J.-J.; Lee, J.-G.; Kim, D.; Tark, S. J.; Ahn, S.; Yun, J. H.; Gwak, J.; Yoon, K. H.; Chandra, S., Cold spray deposition of copper electrodes on silicon and glass substrates. Journal of thermal spray technology 2013, 22 (7), 1092-1102.

‒ Kadoura, M.; Chandra, S., Rupture of thin liquid films sprayed on solid surfaces. Experiments in fluids 2013, 54 (2), 1465.

‒ Farvardin, E.; Johnson, M.; Alaee, H.; Martinez, A.; Dolatabadi, A., Comparative study of biodiesel and diesel jets in gaseous crossflow. Journal of Propulsion and Power 2013, 29 (6), 1292-1302.

‒ Farvardin, E.; Dolatabadi, A., Numerical simulation of the breakup of elliptical liquid jet in still air. Journal of Fluids Engineering 2013, 135 (7).

‒ Dolatabadi, A.; Farvardin, E., Numerical simulation of the breakup of elliptical liquid jet in still air. Journal of Fluids Engineering 2013, 135.

‒ Amirzadeh, A.; Raessi, M.; Chandra, S., Producing molten metal droplets smaller than the nozzle diameter using a pneumatic drop-on-demand generator. Experimental Thermal and Fluid Science 2013, 47, 26-33.

‒ Amini, G.; Ihme, M.; Dolatabadi, A., Effect of gravity on capillary instability of liquid jets. Physical Review E 2013, 87 (5), 053017.

‒ Agarwal, A.; Hyland, M. M.; Lau, Y.-C.; Li, C.-J.; Lima, R. S.; Marple, B. R.; McDonald, A.; Meillot, E.; Abdel-Mottaleb, M. S.; Ahmed, R., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2012. Journal of Thermal Spray Technology 2013, 22 (4), 443.

‒ Tsolas, N.; Chandra, S., Forced convection heat transfer in spray formed copper and nickel foam heat exchanger tubes. Journal of heat transfer 2012, 134 (6), 062602.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Lima, R. S.; Moreau, C., Thermal Cycling of Suspension Plasma Sprayed Alumina‐YSZ Coatings Containing Amorphous Phases. Journal of the American Ceramic Society 2012, 95 (8), 2614-2621.

‒ Salimijazi, H.; Hosseini, M.; Mostaghimi, J.; Pershin, L.; Coyle, T. W.; Samadi, H.; Shafyei, A., Plasma sprayed coating using mullite and mixed alumina/silica powders. Journal of thermal spray technology 2012, 21 (5), 825-830.

‒ SALIMIJAZI, H.; BEHZAD, T.; MOSTAGHIMI, J., SUPERALLOY SKIN ON NICKEL OPEN-PORE FOAM DEPOSITED BY THERMAL SPRAY PROCESSES. 2012.

‒ Montazeri, H.; Bussmann, M.; Mostaghimi, J., Accurate implementation of forcing terms for two-phase flows into SIMPLE algorithm. International Journal of Multiphase Flow 2012, 45, 40-52.

‒ Kim, D. Y.; Park, J. J.; Lee, J. G.; Lee, M. W.; Kim, H. Y.; Oh, J. H.; Seong, T. Y.; Kim, D.; James, S. C.; van Hest, M. F., Tuning Hydrophobicity with Honeycomb Surface Structure and Hydrophilicity with CF 4 Plasma Etching for Aerosol‐Deposited Titania Films. Journal of the American Ceramic Society 2012, 95 (12), 3955-3961.

‒ Graham, P. J.; Farhangi, M. M.; Dolatabadi, A., Dynamics of droplet coalescence in response to increasing hydrophobicity. Physics of Fluids 2012, 24 (11), 112105.

‒ Farhangi, M. M.; Graham, P. J.; Choudhury, N. R.; Dolatabadi, A., Induced detachment of coalescing droplets on superhydrophobic surfaces. Langmuir 2012, 28 (2), 1290-1303.

‒ Esfahani, E. A.; Salimijazi, H.; Golozar, M. A.; Mostaghimi, J.; Pershin, L., Study of corrosion behavior of arc sprayed aluminum coating on mild steel. Journal of thermal spray technology 2012, 21 (6), 1195-1202.

‒ Amini, G.; Dolatabadi, A., Axis-switching and breakup of low-speed elliptic liquid jets. International Journal of Multiphase Flow 2012, 42, 96-103.

‒ Alavi, S.; Passandideh-Fard, M.; Mostaghimi, J., Simulation of semi-molten particle impacts including heat transfer and phase change. Journal of Thermal Spray Technology 2012, 21 (6), 1278-1293.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste‐Berghaus, J.; Moreau, C., High‐Temperature Performance of Alumina–Zirconia Composite Coatings Containing Amorphous Phases. Advanced Functional Materials 2011, 21 (21), 4143-4151.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C., Structural considerations in plasma spraying of the alumina–zirconia composite. Surface and Coatings Technology 2011, 205 (23-24), 5437-5443.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C., Amorphous and crystalline phase formation during suspension plasma spraying of the alumina–zirconia composite. Journal of the European Ceramic Society 2011, 31 (15), 2903-2913.

‒ Park, J.-J.; Lee, M.-W.; Yoon, S. S.; Kim, H.-Y.; James, S. C.; Heister, S. D.; Chandra, S.; Yoon, W.-H.; Park, D.-S.; Ryu, J., Supersonic nozzle flow simulations for particle coating applications: effects of shockwaves, nozzle geometry, ambient pressure, and substrate location upon flow characteristics. Journal of thermal spray technology 2011, 20 (3), 514-522.

‒ Naterer, G.; Suppiah, S.; Stolberg, L.; Lewis, M.; Ferrandon, M.; Wang, Z.; Dincer, I.; Gabriel, K.; Rosen, M.; Secnik, E., Clean hydrogen production with the Cu–Cl cycle–progress of international consortium, II: simulations, thermochemical data and materials. International Journal of Hydrogen Energy 2011, 36 (24), 15486-15501.

‒ Naterer, G.; Suppiah, S.; Stolberg, L.; Lewis, M.; Ferrandon, M.; Wang, Z.; Dincer, I.; Gabriel, K.; Rosen, M.; Secnik, E., Clean hydrogen production with the Cu–Cl cycle–progress of international consortium, I: experimental unit operations. International Journal of Hydrogen Energy 2011, 36 (24), 15472-15485.

‒ Moradian, A.; Mostaghimi, J., Effects of injection angle on the measurement of surface tension coefficient by drop weight method. Physics and Chemistry of Liquids 2011, 49 (1), 32-51.

‒ Mitrasinovic, A.; Pershin, L.; Wen, J. Z.; Mostaghimi, J., Recovery of Cu and valuable metals from E-waste using thermal plasma treatment. JOM 2011, 63 (8), 24.

‒ Lin, E.; Parizi, H.; Pourmousa, A.; Chandra, S.; Mostaghimi, J., Coating the inner surfaces of pipes with high-viscosity epoxy in annular flow. Journal of coatings technology and research 2011, 8 (6), 697.

‒ Lee, M.-W.; Park, J.-J.; Kim, D.-Y.; Yoon, S. S.; Kim, H.-Y.; James, S. C.; Chandra, S.; Coyle, T., Numerical studies on the effects of stagnation pressure and temperature on supersonic flow characteristics in cold spray applications. Journal of thermal spray technology 2011, 20 (5), 1085-1097.

‒ Lee, M.; Park, J.; Kim, D.; Yoon, S.; Kim, H.; Kim, D.; James, S.; Chandra, S.; Coyle, T.; Ryu, J., Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition. Journal of Aerosol Science 2011, 42 (11), 771-780.

‒ Jazi, H. R. S.; Mostaghimi, J.; Pershin, L.; Chandra, S.; Coyle, T. W., Spray Forming of Metal Foam Heat Exchangers. International Journal of Transport Phenomena 2011, 12.

‒ Gadgil, H.; Dolatabadi, A.; Raghunandan, B., Mass distribution studies in effervescent sprays. Atomization and Sprays 2011, 21 (5).

‒ Fukumoto, M.; Hyland, M. M.; Khor, K. A.; Kuroda, S.; Landes, K.; Lau, Y.-C.; Lee, C.; Li, C.-J.; Lima, R. S.; Marple, B. R., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2010. Journal of Thermal Spray Technology 2011, 20 (3), 379.

‒ Farvardin, E.; Stier, O.; Lüthen, V.; Dolatabadi, A., Effect of using liquid feedstock in a high pressure cold spray nozzle. Journal of thermal spray technology 2011, 20 (1), 307-316.

‒ Esfarjani, S. A.; Mostaghimi, J.; Kim, K. S.; Shahverdi, A.; Soucy, G., Radio frequency thermal plasma: the cutting edge technology in production of single-walled carbon nanotubes. Journal of Thermal Science and Technology 2011, 6 (2), 307-322.

‒ Behrooz, N.; Hulse‐Smith, L.; Chandra, S., An evaluation of the underlying mechanisms of bloodstain pattern analysis error. Journal of forensic sciences 2011, 56 (5), 1136-1142.

‒ Amini, G.; Dolatabadi, A., Capillary instability of elliptic liquid jets. Physics of Fluids 2011, 23 (8), 084109.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C., Phase formation and transformation in alumina/YSZ nanocomposite coating deposited by suspension plasma spray process. Journal of Thermal Spray Technology 2010, 19 (4), 787-795.

‒ Shan, Y.; Coyle, T.; Mostaghimi, J., Modeling the influence of injection modes on the evolution of solution sprays in a plasma jet. Journal of thermal spray technology 2010, 19 (1-2), 248-254.

‒ Saaedi, J.; Coyle, T.; Arabi, H.; Mirdamadi, S.; Mostaghimi, J., Effects of HVOF process parameters on the properties of Ni-Cr coatings. Journal of thermal spray technology 2010, 19 (3), 521-530.

‒ Rajabi, N.; Dolatabadi, A., A novel electrode shape for electrowetting-based microfluidics. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2010, 365 (1-3), 230-236.

‒ Raessi, M.; Mostaghimi, J.; Bussmann, M., A volume-of-fluid interfacial flow solver with advected normals. Computers & Fluids 2010, 39 (8), 1401-1410.

‒ Parizi, H. B.; Mostaghimi, J.; Pershin, L.; Jazi, H. S., Analysis of the microstructure of thermal spray coatings: A modeling approach. Journal of thermal spray technology 2010, 19 (4), 736-744.

‒ Naterer, G. F.; Suppiah, S.; Stolberg, L.; Lewis, M.; Wang, Z.; Daggupati, V.; Gabriel, K.; Dincer, I.; Rosen, M.; Spekkens, P., Canada’s program on nuclear hydrogen production and the thermochemical Cu–Cl cycle. international journal of hydrogen energy 2010, 35 (20), 10905-10926.

‒ Mulji, N.; Chandra, S., Rupture and dewetting of water films on solid surfaces. Journal of colloid and interface science 2010, 352 (1), 194-201.

‒ McDonald, A.; Moreau, C.; Chandra, S., Use of thermal emission signals to characterize the impact of fully and partially molten plasma-sprayed zirconia particles on glass surfaces. Surface and Coatings Technology 2010, 204 (15), 2323-2330.

‒ Marr, M. A.; Wallace, J. S.; Pershin, L.; Chandra, S.; Mostaghimi, J., Preliminary testing of metal-based thermal barrier coating in a spark-ignition engine. Journal of Engineering for Gas Turbines and Power 2010, 132 (7), 072806.

‒ Marr, M. A.; Wallace, J. S.; Chandra, S.; Pershin, L.; Mostaghimi, J., A fast response thermocouple for internal combustion engine surface temperature measurements. Experimental thermal and fluid science 2010, 34 (2), 183-189.

‒ Marr, M.; Wallace, J. S.; Memme, S.; Chandra, S.; Pershin, L.; Mostaghimi, J., An investigation of metal and ceramic thermal barrier coatings in a spark-ignition engine. SAE International Journal of Engines 2010, 3 (2), 115-125.

‒ Liu, H.; Azarmi, F.; Bussmann, M.; Mostaghimi, J.; Coyle, T., Experiments and simulation of rapid solidification of air plasma sprayed alloy 625 on stainless steel. Surface and Coatings Technology 2010, 204 (9-10), 1521-1527.

‒ Lin, E.; Parizi, H.; Pourmousa, A.; Chandra, S.; Mostaghimi, J., Annular flow of high-viscosity epoxy in circular pipes. HEFAT 2010 2010.

‒ Li, R.; Ashgriz, N.; Chandra, S.; Andrews, J. R.; Drappel, S., Coalescence of two droplets impacting a solid surface. Experiments in Fluids 2010, 48 (6), 1025-1035.

‒ Li, R.; Ashgriz, N.; Chandra, S., Maximum spread of droplet on solid surface: Low reynolds and weber numbers. Journal of Fluids Engineering 2010, 132 (6), 061302.

‒ Kim, K.; Moradian, A.; Mostaghimi, J.; Soucy, G., Modeling of induction plasma process for fullerene synthesis: Effect of plasma gas composition and operating pressure. Plasma Chemistry and Plasma Processing 2010, 30 (1), 91-110.

‒ Keshavarz-Motamed, Z.; Kadem, L.; Dolatabadi, A., Effects of dynamic contact angle on numerical modeling of electrowetting in parallel plate microchannels. Microfluidics and Nanofluidics 2010, 8 (1), 47.

‒ Kashani, A.; Mostaghimi, J., Aerosol Characterization of Concentric Pneumatic Nebulizer Used in Inductively Coupled Plasma—Mass Spectrometry (ICP-MS). Atomization and Sprays 2010, 20 (5).

‒ Barajas-Ledesma, E.; García-Benjume, M.; Espitia-Cabrera, I.; Ortiz-Gutiérrez, M.; Espinoza-Beltrán, F.; Mostaghimi, J.; Contreras-García, M., Determination of the band gap of TiO2–Al2O3 films as a function of processing parameters. Materials Science and Engineering: B 2010, 174 (1-3), 71-73.

‒ Barajas-Ledesma, E.; García-Benjume, M.; Espitia-Cabrera, I.; Bravo-Patino, A.; Espinoza-Beltrán, F.; Mostaghimi, J.; Contreras-García, M., Photocatalytic activity of Al2O3-doped TiO2 thin films activated with visible light on the bacteria Escherichia coli. Materials Science and Engineering: B 2010, 174 (1-3), 74-79.

‒ Azarmi, F.; Coyle, T.; Mostaghimi, J., Evaluation of the flexural rigidity of sandwich structures using experimentally obtained mechanical properties of the constituents. Journal of thermal spray technology 2010, 19 (1-2), 429-438.

‒ Amirzadeh, A.; Chandra, S., Small droplet formation in a pneumatic drop-on-demand generator: Experiments and analysis. Experimental Thermal and Fluid Science 2010, 34 (8), 1488-1497.

‒ Wu, T. C.-M.; Bussmann, M.; Mostaghimi, J., The impact of a partially molten YSZ particle. Journal of thermal spray technology 2009, 18 (5-6), 957.

‒ Tanaka, Y.; Mostaghimi, J., Numerical Simulation of Solid Particle Ablation in Thermal Plasmas using CIP‐VOF Method. IEEJ Transactions on Electrical and Electronic Engineering 2009, 4 (4), 488-496.

‒ Soltani, R.; Coyle, T. W.; Mostaghimi, J., Creep behaviour of plasma sprayed thermal barrier coatings. Advanced Ceramic Coatings and Interfaces 2009, 306, 37.

‒ Shinoda, K.; Raessi, M.; Mostaghimi, J.; Yoshida, T.; Murakami, H., Effect of substrate concave pattern on splat formation of yttria-stabilized zirconia in atmospheric plasma spraying. Journal of thermal spray technology 2009, 18 (4), 609-618.

‒ Shahverdi, A.; Kim, K.; Alinejad, Y.; Soucy, G.; Mostaghimi, J., Selective oxidation of excess amorphous carbon during single-walled carbon nanotubes synthesis by induction thermal plasma process. J. Nano Res 2009, 2, 800-812.

‒ Sarchami, A.; Ashgriz, N.; Tran, H., Initial perturbation amplitude of liquid sheets produced by jet-impingement nozzles. AIAA journal 2009, 47 (11), 2775-2779.

‒ Samareh, B.; Stier, O.; Lüthen, V.; Dolatabadi, A., Assessment of CFD modeling via flow visualization in cold spray process. Journal of thermal spray technology 2009, 18 (5-6), 934.

‒ Salimijazi, H.; Mostaghimi, J.; Chandra, S.; Pershin, L.; Coyle, T., Spray Forming of Metal Foam Heat Exchangers. Proceedings of ITP 2009.

‒ Raessi, M.; Bussmann, M.; Mostaghimi, J., A semi‐implicit finite volume implementation of the CSF method for treating surface tension in interfacial flows. International journal for numerical methods in fluids 2009, 59 (10), 1093-1110.

‒ Pershin, L.; Mostaghimi, J.; Grisha, N., Carbonaceous gases for DC plasma generation. ISPC19—2009, Bochum, Germany 2009.

‒ Naterer, G.; Suppiah, S.; Lewis, M.; Gabriel, K.; Dincer, I.; Rosen, M. A.; Fowler, M.; Rizvi, G.; Easton, E.; Ikeda, B., Recent Canadian advances in nuclear-based hydrogen production and the thermochemical Cu–Cl cycle. International Journal of Hydrogen Energy 2009, 34 (7), 2901-2917.

‒ Muratore, C.; Hu, J.; Voevodin, A.; Liang, C.; Yang, C.; Huang, N., Diamond like carbon (DLC) films were deposited at room temperature on Si (111) substrates by microwave electron cyclotron resonance (ECR) plasma chemical vapor deposition (CVD) process using plasma of methane diluted with argon gas. During deposition, dc self bias (− 25 V to− 200 V) on substrate was varied by application of RF power to the substrate. The influence of substrate bias on density of the. Surface & Coatings Technology 2009, 203 (8), 1034-1044.

‒ Liu, H.; Jazi, H. S.; Bussmann, M.; Mostaghimi, J., Experiments and modeling of rapid solidification of plasma-sprayed yttria-stabilized zirconia. Acta Materialia 2009, 57 (20), 6013-6021.

‒ Liu, H.; Bussmann, M.; Mostaghimi, J., A comparison of hyperbolic and parabolic models of phase change of a pure metal. International Journal of Heat and Mass Transfer 2009, 52 (5-6), 1177-1184.

‒ Kim, K. S.; Moradian, A.; Mostaghimi, J.; Alinejad, Y.; Shahverdi, A.; Simard, B.; Soucy, G., Synthesis of single-walled carbon nanotubes by induction thermal plasma. Nano Research 2009, 2 (10), 800.

‒ Jazi, H. S.; Mostaghimi, J.; Chandra, S.; Pershin, L.; Coyle, T., Spray-Formed, Metal-Foam Heat Exchangers for High Temperature Applications. Journal of Thermal Science and Engineering Applications 2009, 1 (3), 031008.

‒ Fang, M.; Chandra, S.; Park, C., Heat transfer during deposition of molten aluminum alloy droplets to build vertical columns. Journal of Heat Transfer 2009, 131 (11), 112101.

‒ Esfarjani, S. A.; Dolatabadi, A., A 3D simulation of two-phase flow in an effervescent atomizer for suspension plasma spray. Surface and Coatings Technology 2009, 203 (15), 2074-2080.

‒ Didar, T. F.; Dolatabadi, A.; Wüthrich, R., Local hardness and density variation in glass substrates machined with Spark Assisted Chemical Engraving (SACE). Materials Letters 2009, 63 (1), 51-53.

‒ Dhiman, R.; Chandra, S., Rupture of thin films formed during droplet impact. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 2009, 466 (2116), 1229-1245.

‒ Chandra, S.; Fauchais, P., Formation of solid splats during thermal spray deposition. Journal of Thermal Spray Technology 2009, 18 (2), 148-180.

‒ Azarmi, F.; Coyle, T.; Mostaghimi, J.; Pershin, L., A new approach to develop high temperature foam core sandwich structures using air plasma spraying. The International Journal of Advanced Manufacturing Technology 2009, 44 (9-10), 900-905.

‒ Azarmi, F.; Coyle, T.; Mostaghimi, J., Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam. Journal of materials science 2009, 44 (11), 2836-2843.

‒ Azarmi, F.; Coyle, T.; Mostaghimi, J., Young's modulus measurement and study of the relationship between mechanical properties and microstructure of air plasma sprayed alloy 625. Surface and Coatings Technology 2009, 203 (8), 1045-1054.

‒ Xue, M.; Chandra, S.; Mostaghimi, J.; Moreau, C., A stochastic coating model to predict the microstructure of plasma sprayed zirconia coatings. Modelling and Simulation in Materials Science and Engineering 2008, 16 (6), 065006.

‒ Tarasi, F.; Medraj, M.; Dolatabadi, A.; Oberste-Berghaus, J.; Moreau, C., Effective parameters in axial injection suspension plasma spray process of alumina-zirconia ceramics. Journal of thermal spray technology 2008, 17 (5), 685-691.

‒ Soltani, R.; Coyle, T. W.; Mostaghimi, J., Microstructure and creep behavior of plasma-sprayed yttria stabilized zirconia thermal barrier coatings. Journal of Thermal Spray Technology 2008, 17 (2), 244-253.

‒ Soltani, R.; Coyle, T.; Mostaghimi, J.; Lima, R.; Moreau, C., Thermo-physical properties of plasma sprayed Yttria Stabilized Zirconia Coatings. Surface and Coatings Technology 2008, 202 (16), 3954-3959.

‒ Samareh, B.; Dolatabadi, A., Dense particulate flow in a cold gas dynamic spray system. 2008.

‒ Saaedi, J.; Coyle, T.; Mirdamadi, S.; Arabi, H.; Mostaghimi, J., Phase formation in a Ni–50Cr HVOF coating. Surface and Coatings Technology 2008, 202 (24), 5804-5811.

‒ Roisman, I.; Opfer, L.; Tropea, C.; Raessi, M.; Mostaghimi, J.; Chandra, S., Drop impact onto a dry surface: Role of the dynamic contact angle. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2008, 322 (1-3), 183-191.

‒ Pershin, L.; Chen, L.; Mostaghimi, J., Plasma spraying of metal coatings using CO 2-based gas mixtures. Journal of Thermal Spray Technology 2008, 17 (5-6), 608-611.

‒ Murphy, A. B.; Boulos, M. I.; Colombo, V.; Fauchais, P.; Ghedini, E.; Gleizes, A.; Schram, D.; Proulx, P., Advanced thermal plasma modelling. High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes 2008, 12 (3-4).

‒ MOSTAGHIMI, J., Numerical Simulation on Ablation Process of a Solid Particle in Thermal Plasmas using CIP-VOF Method. 電気学会研究会資料. ED, 放電研究会 2008, 2008 (62), 23-28.

‒ Moradian, A.; Mostaghimi, J., Measurement of surface tension, viscosity, and density at high temperatures by free-fall drop oscillation. Metallurgical and Materials Transactions B 2008, 39 (2), 280-290.

‒ McDonald, A.; Chandra, S.; Moreau, C., Photographing impact of plasma-sprayed particles on rough substrates. Journal of Materials Science 2008, 43 (13), 4631-4643.

‒ Liu, H.; Bussmann, M.; Mostaghimi, J., The Effect of Undercooling on Solidification of YSZ Splats. Journal of Thermal Spray Technology 2008, 17 (5-6), 646-654.

‒ Li, R.; Ashgriz, N.; Chandra, S.; Andrews, J. R.; Williams, J., Drawback during deposition of overlapping molten wax droplets. Journal of Manufacturing Science and Engineering 2008, 130 (4), 041011.

‒ Li, R.; Ashgriz, N.; Chandra, S.; Andrews, J. R., Shape and surface texture of molten droplets deposited on cold surfaces. Surface and Coatings Technology 2008, 202 (16), 3960-3966.

‒ Li, R.; Ashgriz, N.; Chandra, S., Droplet generation from pulsed micro-jets. Experimental Thermal and Fluid Science 2008, 32 (8), 1679-1686.

‒ Goghari, A. A.; Chandra, S., Producing droplets smaller than the nozzle diameter by using a pneumatic drop-on-demand droplet generator. Experiments in Fluids 2008, 44 (1), 105-114.

‒ Fang, M.; Chandra, S.; Park, C. B., Building three-dimensional objects by deposition of molten metal droplets. Rapid Prototyping Journal 2008, 14 (1), 44-52.

‒ Didar, T. F.; Dolatabadi, A.; Wüthrich, R., Characterization and modeling of 2D-glass micro-machining by spark-assisted chemical engraving (SACE) with constant velocity. Journal of micromechanics and microengineering 2008, 18 (6), 065016.

‒ Colombo, V.; Ghedini, E.; Mostaghimi, J., Three-dimensional modeling of an inductively coupled plasma torch for spectroscopic analysis. IEEE transactions on plasma science 2008, 36 (4), 1040-1041.

‒ Chen, L.; Pershin, L.; Mostaghimi, J., A new highly efficient high-power DC plasma torch. IEEE Transactions on Plasma Science 2008, 36 (4), 1068-1069.

‒ Azarmi, F.; Saaedi, J.; Coyle, T. W.; Mostaghimi, J., Microstructure characterization of alloy 625 deposited on nickel foam using air plasma spraying. Advanced Engineering Materials 2008, 10 (5), 459-465.

‒ Azarmi, F.; Coyle, T.; Mostaghimi, J., Optimization of atmospheric plasma spray process parameters using a design of experiment for alloy 625 coatings. Journal of Thermal Spray Technology 2008, 17 (1), 144-155.

‒ Arzpeyma, A.; Bhaseen, S.; Dolatabadi, A.; Wood-Adams, P., A coupled electro-hydrodynamic numerical modeling of droplet actuation by electrowetting. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2008, 323 (1-3), 28-35.

‒ Arabzadeh, S.; Dolatabadi, A., Numerical simulation of nano-particle suspension in an effervescent atomizer. Journal of Computational and Theoretical Nanoscience 2008, 5 (10), 2033-2040.

‒ Xue, M.; Heichal, Y.; Chandra, S.; Mostaghimi, J., Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance. Journal of materials science 2007, 42 (1), 9-18.

‒ Xue, M.; Chandra, S.; Mostaghimi, J.; Salimijazi, H., Formation of pores in thermal spray coatings due to incomplete filling of crevices in patterned surfaces. Plasma Chemistry and Plasma Processing 2007, 27 (5), 647-657.

‒ SUN, Z.; RONG, M.; WU, Y.; LI, J.; YANG, F., Thermal Plasmas: Fundamentals and Applications Thermal Plasmas: Fundamentals and Applications, 1994. IEICE transactions on electronics 2007, 90 (7), 1348-1355.

‒ Soltani, R.; Coyle, T. W.; Mostaghimi, J., Creep Behavior of Plasma‐Sprayed Zirconia Thermal Barrier Coatings. Journal of the American Ceramic Society 2007, 90 (9), 2873-2878.

‒ Shan, Y.; Coyle, T. W.; Mostaghimi, J., 3D modeling of transport phenomena and the injection of the solution droplets in the solution precursor plasma spraying. Journal of Thermal Spray Technology 2007, 16 (5-6), 736-743.

‒ Shan, Y.; Coyle, T.; Mostaghimi, J., Numerical simulation of the solution precursor plasma spraying process. Thermal Spray 2007: Global Coating Solutions 2007, 190-195.

‒ Shan, Y.; Coyle, T.; Mostaghimi, J., Numerical simulation of droplet breakup and collision in the solution precursor plasma spraying. Journal of Thermal Spray Technology 2007, 16 (5-6), 698-704.

‒ Shakeri, A.; Dolatabadi, A.; Haghighat, F.; Karimipanah, T., Impact of occupant modelling on the prediction of airflow around occupants in a ventilated room. International Journal of Ventilation 2007, 6 (2), 129-144.

‒ Samareh, B.; Dolatabadi, A., A three-dimensional analysis of the cold spray process: the effects of substrate location and shape. Journal of thermal spray technology 2007, 16 (5-6), 634-642.

‒ Salimijazi, H.; Raessi, M.; Mostaghimi, J.; Coyle, T., Study of solidification behavior and splat morphology of vacuum plasma sprayed Ti alloy by computational modeling and experimental results. Surface and Coatings Technology 2007, 201 (18), 7924-7931.

‒ Salimijazi, H.; Pershin, L.; Coyle, T.; Mostaghimi, J.; Chandra, S.; Lau, Y.; Rosenzweig, L.; Moran, E., Measuring substrate temperature variation during application of plasma-sprayed zirconia coatings. Journal of Thermal Spray Technology 2007, 16 (4), 580-587.

‒ Salimijazi, H.; Pershin, L.; Coyle, T.; Mostaghimi, J.; Chandra, S.; Lau, Y.; Rosenzweig, L.; Moran, E., Effect of droplet characteristics and substrate surface topography on the final morphology of plasma-sprayed zirconia single splats. Journal of Thermal Spray Technology 2007, 16 (2), 291-299.

‒ Raessi, M.; Mostaghimi, J.; Bussmann, M., Advecting normal vectors: A new method for calculating interface normals and curvatures when modeling two-phase flows. Journal of Computational Physics 2007, 226 (1), 774-797.

‒ Pershin, L.; Chen, L.; Mostaghimi, J., Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases. 2007.

‒ Pershin, L.; Chen, L.; Mostaghimi, J., Comparison of molecular and argon gases for plasma spraying. Thermal Spray 2007: Global Coating Solutions 2007, 266-269.

‒ Parizi, H. B.; Rosenzweig, L.; Mostaghimi, J.; Chandra, S.; Coyle, T.; Salimi, H.; Pershin, L.; McDonald, A.; Moreau, C., Numerical simulation of droplet impact on patterned surfaces. Journal of Thermal Spray Technology 2007, 16 (5-6), 713-721.

‒ Mostaghimi, J.; Jia, L., A Low Temperature Oxy-fuel Spray System. 2007.

‒ Mostaghimi, J.; Chandra, S., Heat transfer in plasma spray coating processes. Advances in Heat Transfer 2007, 40, 143-204.

‒ Moradian, A.; Mostaghimi, J., Surface tension measurement at high temperatures by using dynamics of melt flow. Journal of Fluids Engineering 2007, 129 (8), 991-1001.

‒ McDonald, A.; Xue, M.; Chandra, S.; Mostaghimi, J.; Moreau, C., Melting and solidification: Processes and models/Experiments for solidification benchmarks: Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature. Comptes Rendus Mécanique 2007, 335 (5-6), 351-356.

‒ McDonald, A.; Xue, M.; Chandra, S.; Mostaghimi, J.; Moreau, C., Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature. Comptes Rendus Mecanique 2007, 335 (5-6), 351-356.

‒ McDonald, A.; Moreau, C.; Chandra, S., Effect of substrate oxidation on spreading of plasma-sprayed nickel on stainless steel. Surface and Coatings Technology 2007, 202 (1), 23-33.

‒ McDonald, A.; Moreau, C.; Chandra, S., Thermal contact resistance between plasma-sprayed particles and flat surfaces. International Journal of Heat and Mass Transfer 2007, 50 (9-10), 1737-1749.

‒ Li, R.; Ashgriz, N.; Chandra, S.; Andrews, J. R., Solidification contact angles of molten droplets deposited on solid surfaces. Journal of Materials Science 2007, 42 (23), 9511-9523.

‒ Jazi, H. S.; Coyle, T.; Mostaghimi, J., Understanding grain growth and pore elimination in vacuum-plasma-sprayed titanium alloy. Metallurgical and Materials Transactions A 2007, 38 (3), 476-484.

‒ Fang, M.; Chandra, S.; Park, C., Experiments on remelting and solidification of molten metal droplets deposited in vertical columns. Journal of Manufacturing Science and Engineering 2007, 129 (2), 311-318.

‒ Dolatabadi, A.; Samareh, B., A Three-Dimensional Analysis of the Cold Spray Process: Effect of Substrate Location and Shape. 2007.

‒ Dhiman, R.; McDonald, A. G.; Chandra, S., Predicting splat morphology in a thermal spray process. Surface and Coatings Technology 2007, 201 (18), 7789-7801.

‒ Chen, L.; Mostaghimi, J.; Pershin, L., Numerical Simulations of Cascaded Plasma Torch Using Ar and Molecular Gases. Thermal Spray 2007: Global Coating Solutions 2007, 158-162.

‒ Xue, M.; Chandra, S.; Mostaghimi, J., Investigation of splat curling up in thermal spray coatings. Journal of thermal spray technology 2006, 15 (4), 531-536.

‒ Srivatsan, V.; Dolatabadi, A., Simulation of particle-shock interaction in a high velocity oxygen fuel process. Journal of thermal spray technology 2006, 15 (4), 481-487.

‒ Soltani, R.; Garcia, E.; Coyle, T. W.; Mostaghimi, J.; Lima, R.; Marple, B.; Moreau, C., Thermomechanical behavior of nanostructured plasma sprayed zirconia coatings. Journal of thermal spray technology 2006, 15 (4), 657-662.

‒ Salimijazi, H.; Coyle, T.; Mostaghimi, J., Vacuum plasma spraying: A new concept for manufacturing Ti-6Al-4V structures. JOM 2006, 58 (9), 50-56.

‒ Raessi, M.; Mostaghimi, J.; Bussmann, M., Effect of surface roughness on splat shapes in the plasma spray coating process. Thin Solid Films 2006, 506, 133-135.

‒ Pershin, L.; Chen, L.; Mostaghimi, J., Study of DC Plasma Torch with Conventional and Cascaded Anode. 2006.

‒ Mohseni, K.; Dolatabadi, A., An electrowetting microvalve: Numerical simulation. Annals of the New York Academy of Sciences 2006, 1077 (1), 415-425.

‒ Mohseni, K.; Arzpeyma, A.; Dolatabadi, A., Behaviour of a moving droplet under electrowetting actuation: Numerical simulation. the Canadian journal of Chemical Engineering 2006, 84 (1), 17-21.

‒ McDonald, A.; Raessi, M.; Chandra, S.; Mostaghimi, J.; Moreau, C., Fragmentation of plasma-sprayed molybdenum particles on glass surfaces. ITSC 2006: Building on 100 Years of Success 2006.

‒ McDonald, A.; Lamontagne, M.; Moreau, C.; Chandra, S., Impact of plasma-sprayed metal particles on hot and cold glass surfaces. Thin Solid Films 2006, 514 (1-2), 212-222.

‒ McDonald, A.; Chandra, S.; Lamontagne, M.; Moreau, C., Photographing impact of plasma-sprayed particles on metal substrates. Journal of thermal spray technology 2006, 15 (4), 708-716.

‒ Golozar, M.; Mostaghimi, J.; Coyle, T., Wear behaviour of nanostructured and conventional 8 wt-% Y2O3–ZrO2 coatings against Si3N4 ball. Surface engineering 2006, 22 (5), 399-407.

‒ Golozar, M.; Mostaghimi, J.; Coyle, T., Wear resistance of nano structured and conventional Yttria-stabilized zirconia coatings. Iranian Journal of Materials Science and Engineering 2006, 3 (1and2), 32-38.

‒ Golazar, M.; Mostaghimi, J.; Coyle, T., WEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS. 2006.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S., Modeling development of residual stresses in thermal spray coatings. Computational Materials Science 2006, 35 (1), 13-26.

‒ Chandra, S.; McDonald, M. A.; Raessi, M. M.; Moreau, C.; Mostaghimi, J., Fragmentation of Plasma-Sprayed Molybdenum Particles on Glass Surfaces. 2006.

‒ Abedini, A.; Pourmousa, A.; Chandra, S.; Mostaghimi, J., Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spraying. Surface and Coatings Technology 2006, 201 (6), 3350-3358.

‒ Shirani, E.; Ashgriz, N.; Mostaghimi, J., Interface pressure calculation based on conservation of momentum for front capturing methods. Journal of Computational Physics 2005, 203 (1), 154-175.

‒ Shan, Y.; Mostaghimi, J., Modeling injection of dense liquid sprays in radio frequency inductively coupled plasmas. Plasma chemistry and plasma processing 2005, 25 (3), 193-214.

‒ Salimijazi, H.; Coyle, T.; Mostaghimi, J.; Leblanc, L., Microstructure and failure mechanism in As-deposited, vacuum plasma-sprayed Ti-6Al-4V alloy. Journal of thermal spray technology 2005, 14 (2), 215-223.

‒ Salimijazi, H.; Coyle, T.; Mostaghimi, J.; Leblanc, L., Microstructure of vacuum plasma-sprayed boron carbide. Journal of thermal spray technology 2005, 14 (3), 362-368.

‒ Raessi, M.; Mostaghimi, J., Three-dimensional modelling of density variation due to phase change in complex free surface flows. Numerical Heat Transfer, Part B: Fundamentals 2005, 47 (6), 507-531.

‒ Pourmousa, A.; Mostaghimi, J.; Abedini, A.; Chandra, S., Particle size distribution in a wire-arc spraying system. Journal of thermal spray technology 2005, 14 (4), 502-510.

‒ Moradian, A.; Mostaghimi, J., High temperature surface tension measurement. IEEE Transactions on Plasma Science 2005, 33 (2), 410-411.

‒ Mehdizadeh, N.; Lamontagne, M.; Moreau, C.; Chandra, S.; Mostaghimi, J., Photographing impact of molten molybdenum particles in a plasma spray. Journal of thermal spray technology 2005, 14 (3), 354-361.

‒ Mehdi-Nejad, V.; Mostaghimi, J.; Chandra, S., Modeling interfacial heat transfer from single or multiple deforming droplets. International Journal of Computational Fluid Dynamics 2005, 19 (2), 105-113.

‒ Hulse-Smith, L.; Mehdizadeh, N. Z.; Chandra, S., Deducing drop size and impact velocity from circular bloodstains. Journal of Forensic Science 2005, 50 (1), JFS2003224-10.

‒ Heichal, Y.; Chandra, S.; Bordatchev, E., A fast-response thin film thermocouple to measure rapid surface temperature changes. Experimental Thermal and Fluid Science 2005, 30 (2), 153-159.

‒ Heichal, Y.; Chandra, S., Predicting thermal contact resistance between molten metal droplets and a solid surface. Journal of heat transfer 2005, 127 (11), 1269-1275.

‒ Grossmannová, H.; Krčma, F.; Slanska, K., VOC destruction in atmospheric pressure plasma discharge. Proceedings of ISPC-17 (Toronto, Canada, 2005) 2005, 1216-1217.

‒ Dolatabadi, A.; Pershin, V.; Mostaghimi, J., New attachment for controlling gas flow in the HVOF process. Journal of thermal spray technology 2005, 14 (1), 91-99.

‒ Dhiman, R.; Chandra, S., Freezing-induced splashing during impact of molten metal droplets with high Weber numbers. International journal of heat and mass transfer 2005, 48 (25-26), 5625-5638.

‒ Cheng, S. X.; Li, T.; Chandra, S., Producing molten metal droplets with a pneumatic droplet-on-demand generator. journal of materials processing technology 2005, 159 (3), 295-302.

‒ Azar, R. G.; Yang, Z.; Chandra, S.; Mostaghimi, J., Impact of molten metal droplets on the tip of a pin projecting from a flat surface. International journal of heat and fluid flow 2005, 26 (2), 334-347.

‒ Ashgriz, N.; Cabot, W.; Caboussat, A.; Chua, B.; Colella, P.; Cook, A.; Crockett, R.; Crouseilles, N.; da Silva, F.; Daru, V., Abdallah, NB, 129 Abdel-Khalik, SI, 493 Andersson, F., 274. Journal of Computational Physics 2005, 203, 761-762.

‒ Salimijazi, H.; Coyle, T.; Mostaghimi, J.; Leblanc, L., Characterization of Vacuum Plasma Sprayed Boron Carbide. Thermal Spray 2004: Advancing in Technology and Application 2004.

‒ Mehdizadeh, N. Z.; Raessi, M.; Chandra, S.; Mostaghimi, J., Effect of substrate temperature on splashing of molten tin droplets. Journal of heat transfer 2004, 126 (3), 445-452.

‒ Mehdizadeh, N. Z.; Chandra, S.; Mostaghimi, J., Formation of fingers around the edges of a drop hitting a metal plate with high velocity. Journal of Fluid Mechanics 2004, 510, 353-373.

‒ Mehdi‐Nejad, V.; Mostaghimi, J.; Chandra, S., Modelling heat transfer in two‐fluid interfacial flows. International journal for numerical methods in engineering 2004, 61 (7), 1028-1048.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S., Numerical study of impact and solidification of a droplet over a deposited frozen splat. International Journal of Computational Fluid Dynamics 2004, 18 (2), 133-138.

‒ Dolatabadi, A.; Mostaghimi, J.; Pershin, V., Modeling dense suspension of solid particles in highly compressible flows. International Journal of Computational Fluid Dynamics 2004, 18 (2), 125-131.

‒ Shan, Y.; Mostaghimi, J., Numerical simulation of aerosol droplets desolvation in a radio frequency inductively coupled plasma. Spectrochimica Acta Part B: Atomic Spectroscopy 2003, 58 (11), 1959-1977.

‒ Shahbazi, K.; Paraschivoiu, M.; Mostaghimi, J., Second order accurate volume tracking based on remapping for triangular meshes. Journal of Computational Physics 2003, 188 (1), 100-122.

‒ Pershin, V.; Lufitha, M.; Chandra, S.; Mostaghimi, J., Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings. Journal of Thermal Spray Technology 2003, 12 (3), 370-376.

‒ Paula, K.; Ishigaki, T., Mostaghi mi J. Nonequilibrated situations of pulse modulated Ar-H2and Ar-N2thermal plasmas at at mospheric pres-sure. Journal of Applied Physics 2003.

‒ Paul, K.; Ishigaki, T.; Mostaghimi, J.; Sakuta, T., Nonequilibrated situations of pulse modulated Ar–H 2 and Ar–N 2 thermal plasmas at atmospheric pressure. Journal of applied physics 2003, 93 (11), 8867-8875.

‒ Mostaghimi, J.; Chandra, S.; Ghafouri-Azar, R.; Dolatabadi, A., Modeling thermal spray coating processes: a powerful tool in design and optimization. Surface and Coatings Technology 2003, 163, 1-11.

‒ Mehdizadeh, N.; Chandra, S.; Mostaghimi, J., Adhesion of tin droplets impinging on a stainless steel plate: effect of substrate temperature and roughness. Science and Technology of advanced Materials 2003, 4 (2), 173-181.

‒ Mehdi-Nejad, V.; Mostaghimi, J.; Chandra, S., Two-fluid heat transfer based on a volume tracking advection algorithm. 2003.

‒ Mehdi-Nejad, V.; Mostaghimi, J.; Chandra, S., Air bubble entrapment under an impacting droplet. Physics of fluids 2003, 15 (1), 173-183.

‒ Ghafouri-Azar, R.; Shakeri, S.; Chandra, S.; Mostaghimi, J., Interactions between molten metal droplets impinging on a solid surface. International Journal of Heat and Mass Transfer 2003, 46 (8), 1395-1407.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S.; Charmchi, M., A stochastic model to simulate the formation of a thermal spray coating. Journal of thermal spray technology 2003, 12 (1), 53-69.

‒ Dolatabadi, A.; Mostaghimi, J.; Pershin, V., Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel (HVOF) spray process. Journal of Materials Processing Technology 2003, 137 (1-3), 214-224.

‒ Dolatabadi, A., A computational analysis of high speed particle-laden flows. 2003.

‒ Cui, Q.; Chandra, S.; McCahan, S., The effect of dissolving salts in water sprays used for quenching a hot surface: Part 1—Boiling of single droplets. Journal of heat transfer 2003, 125 (2), 326-332.

‒ Cui, Q.; Chandra, S.; McCahan, S., The effect of dissolving salts in water sprays used for quenching a hot surface: Part 2—Spray cooling. Journal of heat transfer 2003, 125 (2), 333-338.

‒ Cheng, S.; Chandra, S., A pneumatic droplet-on-demand generator. Experiments in Fluids 2003, 34 (6), 755-762.

‒ Shakeri, S.; Chandra, S., Splashing of molten tin droplets on a rough steel surface. International Journal of Heat and Mass Transfer 2002, 45 (23), 4561-4575.

‒ Pasandideh-Fard, M.; Pershin, V.; Chandra, S.; Mostaghimi, J., Splat shapes in a thermal spray coating process: simulations and experiments. Journal of Thermal Spray Technology 2002, 11 (2), 206-217.

‒ Pasandideh-Fard, M.; Chandra, S.; Mostaghimi, J., A three-dimensional model of droplet impact and solidification. International Journal of Heat and Mass Transfer 2002, 45 (11), 2229-2242.

‒ Mostaghimi, J.; Pasandideh-Fard, M.; Chandra, S., In the study of SO 2 removal using pulsed corona discharge, there exists a serious confusion, that is, which kind of reactions, the thermal chemical reactions or the radical chemical reactions, plays a dominant role in SO 2 removal? In this work, through some experiments together with qualitative analyses, this confusion has been clarified. Pulsed corona discharge induces the radical reactions that. Plasma Chemistry and Plasma Processing 2002, 22 (1), 187-195.

‒ Mostaghimi, J.; Pasandideh-Fard, M.; Chandra, S., Dynamics of splat formation in plasma spray coating process. Plasma Chemistry and Plasma Processing 2002, 22 (1), 59-84.

‒ Mostaghimi, J.; Chandra, S., Plenary and topical lectures presented at the 15th International Symposium on Plasma Chemistry, Orleans, France, 9-13 July 2001-Invited Topical Lectures-Splat formation in plasma-spray coating. Pure and Applied Chemistry 2002, 74 (3), 441-446.

‒ Mostaghimi, J.; Chandra, S., Splat formation in plasma-spray coating process. Pure and applied chemistry 2002, 74 (3), 441-445.

‒ Mostaghimi, J., Thermal spray research at the University of Toronto's Centre for Advanced Coating Technology. JOURNAL OF THERMAL SPRAY TECHNOLOGY 2002, 11 (2), 156-158.

‒ Dolatabadi, A.; Mostaghimi, J.; Pershin, V., Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel spray process. Science and Technology of Advanced Materials 2002, 3 (3), 245-255.

‒ Bussmann, M.; Mostaghimi, J.; Kirk, D.; Graydon, J., A numerical study of steady flow and temperature fields within a melt spinning puddle. International journal of heat and mass transfer 2002, 45 (19), 3997-4010.

‒ Ashgriz, N.; Mostaghimi, J., An introduction to computational fluid dynamics. Fluid Flow Handbook, McGraw-Hill Professional 2002, 24.1-24.52.

‒ Thomson, I.; Pershin, V.; Mostaghimi, J.; Chandra, S., Experimental testing of a curvilinear gas shroud nozzle for improved plasma spraying. Plasma chemistry and plasma processing 2001, 21 (1), 65-82.

‒ Paul, K.; Mostaghimi, J.; Ishigaki, T.; Sakuta, T., Transient response of radio frequency inductively coupled plasma for pulse modulation. Plasma Chemistry and Plasma Processing 2001, 21 (3), 371-400.

‒ Pasandideh-Fard, M.; Bussmann, M.; Chandra, S., Simulating droplet impact on a substrate of arbitrary shape. Atomization and sprays 2001, 11 (4).

‒ Pasandideh-Fard, M.; Aziz, S.; Chandra, S.; Mostaghimi, J., Cooling effectiveness during the impact of cold water droplets on a hot steel plate: simulations and experiments. International Journal of Heat and Fluid Flow 2001, 22, 201-210.

‒ Pasandideh-Fard, M.; Aziz, S.; Chandra, S.; Mostaghimi, J., Cooling effectiveness of a water drop impinging on a hot surface. International journal of heat and fluid flow 2001, 22 (2), 201-210.

‒ Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S., Deposition model of thermal spray coatings. Thermal Spray 2001: New Surfaces for a New Millennium 2001, 951-958.

‒ Cui, Q.; Chandra, S.; McCahan, S., The effect of dissolving gases or solids in water droplets boiling on a hot surface. Journal of heat transfer 2001, 123 (4), 719-728.

‒ Pasandideh-Fard, M.; Chandra, S.; Mostaghimi, J., 1st International Thermal Spray Conference. Montreal, Quebec 2000, 125.

‒ Mostaghimi, J.; Boulos, M., RELATIONSHIP BETWEEN THE INDUCTION FRE-QUENCY AND LTE IN INDUCTIVELY COUPLED PLAS-MAS. Measurement 2000, 5, 5.

‒ Mehdizadeh, N.; Chandra, S.; Mostaghimi, J., Splashing of a small droplet impinging on a solid surface at high velocity. ASME-PUBLICATIONS-HTD 2000, 366, 397-406.

‒ Jankovic, M.; Mostaghimi, J.; Pershin, V., Design of a new nozzle for direct current plasma guns with improved spraying parameters. Journal of Thermal Spray Technology 2000, 9 (1), 114-120.

‒ Dolatabadi, A.; Mostaghimi, J.; Ivanovic, M., A Fully Eulerian Approach to Particle-Laden Compressible Flows. ASME-PUBLICATIONS-HTD 2000, 366, 225-230.

‒ Chae, Y.; Mostaghimi, J.; Yoshida, T., Deformation and solidification process of a super–cooled droplet impacting on the substrate under plasma spraying conditions. Science and Technology of Advanced Materials 2000, 1 (3), 147-156.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., Modeling the splash of a droplet impacting a solid surface. Physics of fluids 2000, 12 (12), 3121-3132.

‒ Bussmann, M.; Aziz, S.; Chandra, S.; Mostaghimi, J., Photographs and Simulations of Molten Metal Droplets Landing on a Solid Surface. Journal of Heat Transfer 2000, 122 (3), 422-422.

‒ Aziz, S. D.; Chandra, S., Impact, recoil and splashing of molten metal droplets. International journal of heat and mass transfer 2000, 43 (16), 2841-2857.

‒ Sobolewski, K.; Mostaghimi, J.; Tran, H., Modelling of particle deposition on superheater tubes in kraft recovery boilers. International Journal of Modelling and Simulation 1999, 19 (3), 262-270.

‒ Bussmann, M.; Mostaghimi, J.; Chandra, S., On a three-dimensional volume tracking model of droplet impact. Physics of Fluids 1999, 11 (6), 1406-1417.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., Numerical results of off-angle thermal spray particle impact. ITSC99 Proc 1999, 783-86.

‒ Bhola, R.; Chandra, S., Parameters controlling solidification of molten wax droplets falling on a solid surface. Journal of materials science 1999, 34 (19), 4883-4894.

‒ Qiao, Y.; Chandra, S., Spray cooling enhancement by addition of a surfactant. Journal of Heat Transfer 1998, 120 (1), 92-98.

‒ Pasandideh-Fard, M.; Bhola, R.; Chandra, S.; Mostaghimi, J., Deposition of tin droplets on a steel plate: simulations and experiments. International Journal of Heat and Mass Transfer 1998, 41 (19), 2929-2945.

‒ Mostaghimi, J.; Paul, K.; Sakuta, T., Transient response of the radio frequency inductively coupled plasma to a sudden change in power. Journal of applied physics 1998, 83 (4), 1898-1908.

‒ Mostaghimi, J., Modeling droplet impact in plasma spray processes. Pure and applied chemistry 1998, 70 (6), 1209-1215.

‒ Jankovic, M.; Mostaghimi, J., Thermally induced measurement error by a water-cooled enthalpy probe. Plasma chemistry and plasma processing 1998, 18 (1), 53-71.

‒ Bastani-Parizi, H.; Mostaghimi, J., Chemical kinetic calculations of the gas phase in atmospheric pressure microwave plasma-assisted chemical vapour deposition of diamond. International Journal of Modelling and Simulation 1998, 18 (1), 16-25.

‒ Kim, J.; Mostaghimi, J.; Iravani, R., Performance analysis of a radio-frequency induction plasma generator using nonlinear state-space approach. IEEE transactions on plasma science 1997, 25 (5), 1023-1028.

‒ Desilets, M.; Bilodeau, J.; Proulx, P., Modelling of the reactive synthesis of ultra-fine powders in a thermal plasma reactor. Journal of Physics D: Applied Physics 1997, 30 (13), 1951.

‒ Cai, M.; Haydar, D. A.; Montaser, A.; Mostaghimi, J., Computer simulation of argon-nitrogen and argon-oxygen inductively coupled plasmas. Spectrochimica Acta Part B: Atomic Spectroscopy 1997, 52 (3), 369-386.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., LGGLLG GGGGGG GGGGGG GLLLLL GGG LLLLL GGG LGGGGGGG LLLLL. 1997.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., Contributions from. Physics of Fluids 1997, 9 (9), S7.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., Three-Dimensional Droplet Impact. Physics of Fluids 1997, 9 (9), S7-S7.

‒ Bussmann, M.; Chandra, S.; Mostaghimi, J., Droplet impact onto arbitrary surface geometries. Proc. ASME Fluids Engineering 1997.

‒ Buchner, P.; Ferfers, H.; Schubert, H.; Uhlenbusch, J., Evaporation of copper powders in an inductively coupled thermal rf plasma-numerical modelling and spectroscopic measurements. Plasma Sources Science and Technology 1997, 6 (3), 450.

‒ SAKUTA, T.; Chandra, P. K.; SHAFIUL, A. A.; MOSTAGHIMI, J., A Comparison of N_2, SF_6, and Argon Inductively Coupled Plasmas. 電気学会研究会資料. SP, 開閉保護研究会 1996, 1996 (62), 151-160.

‒ Qiao, Y.; Chandra, S., Boiling of droplets on a hot surface in low gravity. International Journal of Heat and Mass Transfer 1996, 39 (7), 1379-1393.

‒ Passandideh Fard, M.; Qiao, Y.; Chandra, S.; Mostaghimi, J., Capillary effects during droplet impact on a solid surface. Physics of Fluids 1996, 8 (3), 650-660.

‒ Pasandideh‐Fard, M.; Qiao, Y.; Chandra, S.; Mostaghimi, J., Capillary effects during droplet impact on a solid surface. Physics of fluids 1996, 8 (3), 650-659.

‒ Pasandideh-Fard, M.; Mostaghimi, J., Droplet impact and solidification in a thermal spray process: droplet-substrate interaction. Thermal spray: Practical Solutions for Engineering Problems, CC Berndt (Ed.), Pub. ASM International, Material Park, Ohio-USA 1996, 637-646.

‒ Pasandideh-Fard, M.; Chen, P.; Mostaghimi, J.; Neumann, A., The generalized Laplace equation of capillarity I. Thermodynamic and hydrostatic considerations of the fundamental equation for interfaces. Advances in Colloid and Interface Science 1996, 63, 151-177.

‒ Chen, P.; Susnar, S.; Pasandideh-Fard, M.; Mostaghimi, J.; Neumann, A., The generalized Laplace equation of capillarity II. Hydrostatic and thermodynamic derivations of the Laplace equation for high curvatures. Advances in colloid and interface science 1996, 63, 179-193.

‒ Chandra, S.; Di Marzo, M.; Qiao, Y.; Tartarini, P., Effect of liquid-solid contact angle on droplet evaporation. Fire safety journal 1996, 27 (2), 141-158.

‒ Buckel, J. W.; Chandra, S., Hot wire ignition of hydrogen-oxygen mixtures. International journal of hydrogen energy 1996, 21 (1), 39-44.

‒ Shen, X.; Kuhn, D.; Tran, H.; Mostaghimi, J.; Dees, C., Simulation of flue gas flow in the upper furnace of a recovery boiler. Simulated results agree well with field measurements. Pulp & paper Canada 1995, 96 (5), 44-47.

‒ Qiao, Y.; Chandra, S., Impact of n-heptane droplets on a hot surface in low gravity. Transactions of the Canadian Society for Mechanical Engineering 1995, 19 (3), 271-284.

‒ Pasandideh-Fard, M.; Mostaghimi, J., On the spreading and solidification of molten particles in a plasma spray process effect of thermal contact resistance. Plasma chemistry and plasma processing 1995, 16 (1), S83-S98.

‒ Jankovic, M.; Mostaghimi, J., A new nozzle design for dc plasma spray guns. Plasma Chemistry and Plasma Processing 1995, 15 (4), 607-628.

‒ Cox, B.; Wong, Y.; Mostaghimi, J., High conductivity porous oxides formed on Zr-2.5 wt% Nb. Journal of nuclear materials 1995, 226 (1-2), 272-276.

‒ Cai, M.; Montaser, A.; Mostaghimi, J., Two-temperature model for the simulation of atmospheric-pressure helium ICPs. Applied spectroscopy 1995, 49 (10), 1390-1402.

‒ Pasandideh-Fard, M.; Mostaghimi, J. Deformation and solidification of molten particles on a substrate in thermal plasma spraying; ASM International, Materials Park, OH (United States): 1994.

‒ Chen, K.; Boulos, M. I., Turbulence in induction plasma modelling. Journal of Physics D: Applied Physics 1994, 27 (5), 946.

‒ Chandra, S.; Lindsey, P.; Bassuk, N., A gauge to measure the mass flow rate of water in trees. Plant, Cell & Environment 1994, 17 (7), 867-874.

‒ Chandra, S.; Aziz, S., Leidenfrost evaporation of liquid nitrogen droplets. Journal of heat transfer 1994, 116 (4), 999-1006.

‒ Chabchoub, F.; Argyropoulos, S.; Mostaghimi, J., Mathematical modelling and experimental measurements on the horizontal ohno continuous casting process for pure tin. Canadian metallurgical quarterly 1994, 33 (1), 73-88.

‒ Cao, M.; Proulx, P.; Boulos, M.; Mostaghimi, J., Mathematical modeling of high‐power transferred arcs. Journal of Applied Physics 1994, 76 (12), 7757-7767.

‒ Sakuta, T.; Oguri, S.; Takashima, T.; Boulos, M., Effects of plasma diameter and operating frequency on dynamic behaviour of induction thermal plasma. Plasma Sources Science and Technology 1993, 2 (1), 67.

‒ Njah, Z.; Mostaghimi, J.; Faghri, M.; Boulos, M., Study of 3-D mixing of a cold jet with a transverse plasma stream. International journal of heat and mass transfer 1993, 36 (16), 3897-3907.

‒ Njah, Z.; Mostaghimi, J.; Boulos, M., Mathematical modelling of the 3-D mixing in an induction plasma reactor. International journal of heat and mass transfer 1993, 36 (16), 3909-3919.

‒ Chabchoub, F.; Mostaghimi, J.; Argyropoulos, S., A three dimensional mathematical model for the horizontal Ohno continuous casting process. ASME-PUBLICATIONS-HTD 1993, 196, 69-69.

‒ Cai, M.; Montaser, A.; Mostaghimi, J., Computer simulation of atmospheric-pressure helium inductively coupled plasma discharges. Spectrochimica Acta Part B: Atomic Spectroscopy 1993, 48 (6-7), 789-807.

‒ Mostaghimi, J.; Boulos, M., Inductively coupled plasma in Analytical spectrometry. Montaser and DW Golightly, Eds. New York: VCH 1992.

‒ Mostaghimi, J., Mathematical modeling of the inductively coupled plasmas. Inductively Coupled Plasmas in Analytical Atomic Spectrometry 1992.

‒ Chandra, S.; Avedisian, C., Observations of droplet impingement on a ceramic porous surface. International journal of heat and mass transfer 1992, 35 (10), 2377-2388.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M., Radiative energy transfer in induction plasma modelling. International journal of heat and mass transfer 1991, 34 (10), 2571-2579.

‒ Prouix, P.; Mostaghini, J.; Boulos, M., Modeling the vaporization of small metallic particles in a dc plasma jet. Heat Transfer in Themal Plasma Processing, HTD, ASME Publications 1991, 161, 155-T60.

‒ Lad, N.; Aroussi, A.; Adebayo, D.; Chandra, S.; Avedisian, C.; Pasandideh-Fard, M.; Bussmann, M.; Chandra, S.; Mostaghimi, J.; Hung, L., Particle entrainment and turbulent mixing in free, shear-flows: Part 1. The naturally developing mixing layer. Journal of Applied Sciences 1991, 11 (10), 13-41.

‒ Chandra, S.; Avedisian, C., On the collision of a droplet with a solid surface. Proc. R. Soc. Lond. A 1991, 432 (1884), 13-41.

‒ Zhao, G.; Mostaghimi, J.; Boulos, M., The induction plasma chemical reactor: part I. Equilibrium model. Plasma chemistry and plasma processing 1990, 10 (1), 133-150.

‒ Zhao, G.; Mostaghimi, J.; Boulos, M., The induction plasma chemical reactor: Part II. Kinetic model. Plasma chemistry and plasma processing 1990, 10 (1), 151-166.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M., Loading and radiation effects in plasma jet modelling. Le Journal de Physique Colloques 1990, 51 (C5), C5-263-C5-270.

‒ Mostaghimi, J.; Boulos, M. I., Effect of frequency on local thermodynamic equilibrium conditions in an inductively coupled argon plasma at atmospheric pressure. Journal of Applied Physics 1990, 68 (6), 2643-2648.

‒ Chandra, S.; Avedisian, C., The collision of a droplet with a solid surface. Physics of Fluids A: Fluid Dynamics 1990, 2 (9), 1525-1525.

‒ Chandra, S.; Avedisian, C., Droplet combustion near a cold surface. Proc. R. Soc. Lond. A 1990, 429 (1877), 481-503.

‒ Yang, P.; Barnes, R. M.; Mostaghimi, J.; Boulos, M. I., Application of a two-dimensional model in the simulation of an analytical inductively coupled plasma discharge. Spectrochimica Acta Part B: Atomic Spectroscopy 1989, 44 (7), 657-666.

‒ Mostaghimi, J.; Dostie, M.; Jurewicz, J., Analysis of an RF induction plasma torch with a permeable ceramic wall. The Canadian Journal of Chemical Engineering 1989, 67 (6), 929-936.

‒ Mostaghimi, J.; Boulos, M. I., Two-dimensional electromagnetic field effects in induction plasma modelling. Plasma chemistry and plasma processing 1989, 9 (1), 25-44.

‒ Mostaghimi, J., Two-dimensional Electromagnetic Field Effects in rf Inductively Coupled Plasmas. J. Plasma Chemistry Plasma Processing 1989, 9, 23-42.

‒ Etemadi, K.; Zhao, G.; Mostaghimi, J., Impact of cathode evaporation on a free-burning arc. Journal of Physics D: Applied Physics 1989, 22 (11), 1692.

‒ El‐Hage, M.; Mostaghimi, J.; Boulos, M., A turbulent flow model for the rf inductively coupled plasma. Journal of Applied Physics 1989, 65 (11), 4178-4185.

‒ Chandra, S.; Avedisian, C., The evaporation and combustion of levitated arrays of two, three and five droplets at a hot surface. Proc. R. Soc. Lond. A 1988, 418 (1855), 365-382.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M. I., Heating of powders in an rf inductively coupled plasma under dense loading conditions. Plasma Chemistry and Plasma Processing 1987, 7 (1), 29-52.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M., ISPC 8,(ed.) Akashi. University of Tokyo 1987, 1, 13.

‒ Proulx, E.; Mostaghimi, J.; Boulos, M., Modeling of the thermal treatment of powders in a plasma jet under dense loading conditions. ISPC-8, Tokyo 1987, 13-18.

‒ Mostaghimi, J.; Proulx, P.; Boulos, M. I., A two‐temperature model of the inductively coupled rf plasma. Journal of applied physics 1987, 61 (5), 1753-1760.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M. I., Plasma-particle interaction effects in induction plasma modeling under dense loading conditions. International journal of heat and mass transfer 1985, 28 (7), 1327-1336.

‒ Proulx, P.; Mostaghimi, J.; Boulos, M., Computer modeling of the emission patterns for a spectrochemical ICP. Int J Heat Mass Transfer 1985, 28, 1327-1336.

‒ Mostaghimi, J.; Proulx, P.; Boulos, M. I., An analysis of the computer modeling of the flow and temperature fields in an inductively coupled plasma. Numerical Heat Transfer 1985, 8 (2), 187-201.

‒ Mostaghimi, J.; Proulx, P.; Boulos, M.; Barnes, R., Computer modeling of the emission patterns for a spectrochemical ICP. Spectrochimica Acta Part B: Atomic Spectroscopy 1985, 40 (1-2), 153-166.

‒ Mostaghimi-Tehrani, J.; Pfender, E., Effects of metallic vapor on the properties of an argon arc plasma. Plasma chemistry and plasma processing 1984, 4 (2), 129-139.

‒ Mostaghimi, J.; Proulx, P.; Boulos, M. I., Parametric study of the flow and temperature fields in an inductively coupled rf plasma torch. Plasma chemistry and plasma processing 1984, 4 (3), 199-217.

‒ MOSTAGHIMI, T., THE EFFECT OF LOW IONIZATION POTENTIAL CONTAMINANTS ON THE TRANSPORT PROPERTIES OF THERMAL PLASMAS. 1983.

‒ Mostaghimi, J.; Pfender, E., Measurement of thermal conductivities of soilsMessung der Bodenwärmeleitfähigkeit. Wärme-Und Stoffübertragung 1980, 13 (1-2), 3-9.

‒ ZHAO, G.; MOSTAGHIMI, J.; GRAVELLE, D.; JUREWICZ, J.; ËL L, B., NUMERICAL SIMULATION OF A PLASMA CHEMICAL REACTOR.

‒ Xu, P.; Farrokhpanah, A.; Mostaghimi, J.; Coyle, T. W.; Pershin, L., Suspension Plasma Spray of Zirconia Coatings.

‒ Xu, P.; Coyle, T. W.; Pershin, L.; Mostaghimi, J., Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions. Journal of Thermal Spray Technology, 1-13.

‒ Thomson, I.; Pershin, V.; Mostaghimi, J.; Chandra, S., Experimental validation of a curvilinear nozzle design for improved dc plasma spraying.

‒ Tarasi, F.; Coyle, T.; Mostaghimi, J., Coating and Alloying the Ni-Foam for High Temperature Application.

‒ Sharifi, N.; Ettouil, F. B.; Dolatabadi, A.; Moreau, C., Combustive And Compressible Flow In High Velocity Oxygen Fuel (HVOF).

‒ Shan, Y.; Shen, C.; Jia, L.; Mostaghimi, J., Surface remelting is an important technique for modifying the microstructure of thermally sprayed coatings as it reduces the porosity and promotes a metallurgical bond between substrate and coating. Many studies have been carried out in the field of materials selection and surface engineering in an attempt to reduce cavitation damage. In this work, an Fe-Mn-Cr-Si alloy was deposited by arc spraying.

‒ Shaghaghian, S.; Jadidi, M.; Dolatabadi, A., Spray Structure of an Elliptical Effervescent Atomizer.

‒ Salimijazi, H.; Raessi, M.; Coyle, T.; Mostaghimi, J., Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Alloy.

‒ Salimijazi, H.; Mostaghimi, J.; Coyle, T.; Pershin, L.; Chandra, S.; Rosenzweig, L.; Moran, E.; Lau, Y., Temperature Evolution and Pore Distribution in Zirconia Footprint Deposits Using Atmospheric Plasma Spraying.

‒ Saleh, A.; Amini, G.; Dolatabadi, A., Measurement of Dynamic Surface Tension of Suspension Sprays Based on Oscillating Jet.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., Spectrochemicia Acta, Part B Spectrochemicia Acta, Part B 48B, 787, 1993.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., IEEE Trans. on Power Appar. and Syst. IEEE Trans. on Power Appar. and Syst. PAS-95, 1, 1976.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., IEEE Trans. Power Appr. Syst. IEEE Trans. Power Appr. Syst. PAS-98, 339, 1980.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., Inductively Coupled Plasma Emission Spectroscopy Inductively Coupled Plasma Emission Spectroscopy, 1987.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., IEEE Trans. on Power Appar. and Syst. IEEE Trans. on Power Appar. and Syst. PAS-103, 3561, 1984.

‒ SAKUTA, T.; PAUL, K. C.; SHAFIUL, A. A.; MOSTAGHIMI, J., Computational Fluid Flow and Heat Transfer Computational Fluid Flow and Heat Transfer, 1980.

‒ Rezaey, R.; Loosmann, F.; Tropea, C.; Chandra, S.; Mostaghimi, J., EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW IN LASER SINTERED HEAT EXCHANGERS.

‒ Raessi, M.; Mostaghimi, J., Three-dimensional modeling of solidification shrinkage.

‒ Raessi, M.; Bussmann, M.; Mostaghimi, J., Advecting interface normal vectors: A novel method for accurate interface curvature calculation.

‒ Pershin, L.; Chen, L.; Mostaghimi, J.; Coyle, T., Deposition of YSZ coating using molecular gases for DC plasma generation.

‒ Pasandideh-Fard, M.; Bussmann, M.; Chandra, S.; Mostaghimi, J., Department of Mechanical and Industrial Engineering University of Toronto.

‒ Pasandideh-Fard, M.; Bhola, R. C., S. and Mostaghimi, J., 1998a. International Journal of Heat and Mass Transfer 41, 2929-2945.

‒ Pasandideh-Fard, M., Mostaghimi j.(1996)“Droplet impact and solidification in a thermal spray process: droplet-substrate interaction”, Thermal spray: Practical Solutions for Engineering Problems, CC Berndt (Ed.), Pub. ASM International, Material Park, Ohio-USA, 637-646.

‒ Movassat, M.; Dolatabadi, A., Computational Study of Breakup Length of Liquid Sheets.

‒ Mostaghimi, J.; Toronto, G. M.; Pfender, E., Department of Mechanical Engineering.

‒ MOSTAGHIMI, J.; GARCÍA, M. E. C., Investigación en Materiales.

‒ Mostaghimi, J., Understanding Plasma Spray Coating Process: A Modeling Approach.

‒ Moradian, A.; Mostaghimi, J., Application of radio frequency Inductively Coupled Plasma (rf-ICP) in the measurement of physical properties of melts.

‒ Moradian, A.; Mostaghimi, J., Numerical based equations for drop detachment phenomenon.

‒ Moghtadernejad, S.; Jadidi, M.; Tembely, M.; Mohammadi, M.; Dolatabadi, A., DROPLET SHEDDING UNDER THE EFFECT OF HIGH SHEAR FLOW.

‒ Mehdi-Nejad, V.; Mostaghimi, J.; Chandra, S., Two-Fluid Heat Transfer from Single or Multiple Droplets Using a One Field VOF Model.

‒ Kim, J.; Mostaghimi, J.; Iravani, R., A NUMERICAL STUDY OF THE MINIMUM SUSTAINABLE POWER FOR ARGON ICPs.

‒ Kashani, A.; Mostaghimi, J.; Badiei, H.; Kahen, K., Numerical simulation of heat transfer mechanisms in RF-ICP torches running at low argon flow rates.

‒ Henderson, K.; Esmaeelpanah, J.; Chandra, S.; Mostaghimi, J., CAUGHT ON CAMERA.

‒ Hashemi, M.; Jadidi, M.; Dolatabadi, A., Numerical simulation of primary breakup of nonturbulent liquid jets in high-viscous gaseous crossflows.

‒ Hafeez, P.; Salavati, S.; Esmaeelpanah, J.; Chandra, S.; Mostaghimi, J.; Coyle, T., High Temperature Metal Foam Heat Exchanger.

‒ Ghafouri'Azar, R.; Mostaghimi, J.; Chandra, S., Department of Mechanical and Industrial Engineering University of Toronto.

‒ FARVARDIN, E.; DOLATABADI, A.; KARIMI, M.; VILLAFUERTE, J., EFFECT OF LIQUID FEEDSTOCK ON DOWNSTREAM COLD SPRAY NOZZLE.

‒ Farrokhpanah, A.; Samareh, B.; Mostaghimi, J., GPU BASED MULTIPHASE SMOOTHED PARTICLE HYDRODYNAMICS (SPH).

‒ Farrokhpanah, A.; Pershin, L.; Mostaghimi, J., Twin Wire Arc Torch with Optimized Flow Parameters.

‒ Farrokhpanah, A.; Nabovati, A.; Mostaghimi, J., Study of Curved Boundary Treatments in Lattice Boltzmann Method.

‒ Dolatabadi, A.; Raghunandan, B., Breakup and Dispersion in Effervescent Sprays H. Gadgil Department of Aerospace Engineering Indian Institute of Science, Bangalore, India 560012.

‒ Cao, M.; Proulx, P.; Mostaghimi, J.; Boulos, M., A STUDY OF THE MODELLING OF HIGH POWER TRANSFERRED ARCS.

‒ Bussmann, M.; Mostaghimi, J.; Kirk, D.; Graydon, J., A Numerical Study of Steady Flow and. http://lib-www. lanl. gov/la-pubs/00357001. pdf, 3.

‒ Bussmann, M.; Mostaghimi, J.; Chandra, S.; Tran, H., NUMER1CAL MODELL1NG OF CARRYOVER DEPOS1T1ON 1N KRAFT RECOVERY BO1LERS.

‒ Attarzadeh, R.; Tembely, M.; Dolatabadi, A., A Numerical Study of The Effect of Roughness Topology on Surface Hydrophobicity.

‒ Amini, G.; Dolatabadi, A., Department of Mechanical and Industrial Engineering Concordia University Montreal, QC, Canada.

‒ Amini, G.; Dolatabadi, A., Forced and Natural Breakup of Liquid Jets Emerging from Elliptic Nozzles.

‒ Amini1a, G.; Dolatabadi, A., INSTABILITY OF LIQUID JETS IN WEAK GASEOUS CROSSFLOW.

‒ Aksenenko, E.; Alahverdjieva, V.; Amirfazli, A.; Antoni, M.; Arbelot, M.; Arnaudov, L.; Arzpeyma, A.; Bhaseen, S.; Brennan, F.; Cabrerizo-Vílchez, M., journal homepage: www. elsevier. com/locate/colsurfa.

‒ Ahmadian, O. S.; Jazi, H. S.; Fathi, M.; Mostaghimi, J.; Pershin, L., Wire Arc Spray Copper Coatings in Medical Applications.

‒ Ahmadian, O. S.; Fathi, M.; Jazi, H. S.; Mostaghimi, J., Study of the microstructure and antibacterial behavior of the as-sprayed copper coatings.

‒ Aghasibeig, M.; Dolatabadi, A.; Moreau, C.; Wuthrich, R., Manufacturing Engineered 3-Dimensional Electrode Coatings by Atmospheric Plasma Spraying for Hydrogen Evolution.

‒ Abubakar, A. A.; Arif, A. F. M.; Akhtar, S. S.; Mostaghimi, J., Splats Formation, Interaction and Residual Stress Evolution in Thermal Spray Coating Using a Hybrid Computational Model. Journal of Thermal Spray Technology, 1-19.